tornavis/source/blender/editors/space_text/text_ops.c

2675 lines
59 KiB
C
Raw Normal View History

2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/**
* $Id$
*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
* ***** END GPL LICENSE BLOCK *****
*/
#include <stdlib.h>
#include <string.h>
#include <ctype.h> /* ispunct */
#include <sys/stat.h>
#include "MEM_guardedalloc.h"
#include "DNA_constraint_types.h"
#include "DNA_object_types.h"
#include "DNA_action_types.h"
#include "DNA_scene_types.h"
#include "DNA_screen_types.h"
#include "DNA_space_types.h"
#include "DNA_text_types.h"
#include "DNA_windowmanager_types.h"
#include "BLI_blenlib.h"
#include "PIL_time.h"
#include "BKE_context.h"
#include "BKE_depsgraph.h"
#include "BKE_global.h"
#include "BKE_library.h"
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
#include "BKE_main.h"
#include "BKE_report.h"
#include "BKE_suggestions.h"
#include "BKE_text.h"
#include "WM_api.h"
#include "WM_types.h"
#include "ED_curve.h"
#include "ED_screen.h"
#include "UI_interface.h"
#include "UI_resources.h"
#include "RNA_access.h"
#include "RNA_define.h"
#ifndef DISABLE_PYTHON
#include "BPY_extern.h"
#endif
#include "text_intern.h"
/************************ poll ***************************/
static int text_new_poll(bContext *C)
{
return 1;
}
static int text_edit_poll(bContext *C)
{
Text *text= CTX_data_edit_text(C);
if(!text)
return 0;
if(text->id.lib) {
// BKE_report(op->reports, RPT_ERROR, "Can't edit external libdata");
return 0;
}
return 1;
}
static int text_space_edit_poll(bContext *C)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text= CTX_data_edit_text(C);
if(!st || !text)
return 0;
if(text->id.lib) {
// BKE_report(op->reports, RPT_ERROR, "Can't edit external libdata");
return 0;
}
return 1;
}
static int text_region_edit_poll(bContext *C)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text= CTX_data_edit_text(C);
ARegion *ar= CTX_wm_region(C);
if(!st || !text)
return 0;
if(!ar || ar->regiontype != RGN_TYPE_WINDOW)
return 0;
if(text->id.lib) {
// BKE_report(op->reports, RPT_ERROR, "Can't edit external libdata");
return 0;
}
return 1;
}
/********************** updates *********************/
void text_update_line_edited(Text *text, TextLine *line)
{
if(!line)
return;
/* we just free format here, and let it rebuild during draw */
if(line->format) {
MEM_freeN(line->format);
line->format= NULL;
}
}
void text_update_edited(Text *text)
{
TextLine *line;
for(line=text->lines.first; line; line=line->next)
text_update_line_edited(text, line);
}
/******************* new operator *********************/
static int new_exec(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text;
text= add_empty_text("Text");
if(st) {
st->text= text;
st->top= 0;
}
WM_event_add_notifier(C, NC_TEXT|NA_ADDED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_new(wmOperatorType *ot)
{
/* identifiers */
ot->name= "New";
ot->idname= "TEXT_OT_new";
/* api callbacks */
ot->exec= new_exec;
ot->poll= text_new_poll;
}
/******************* open operator *********************/
static int open_exec(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text;
char str[FILE_MAX];
RNA_string_get(op->ptr, "filename", str);
text= add_text(str, G.sce);
if(st) {
st->text= text;
st->top= 0;
}
WM_event_add_notifier(C, NC_TEXT|NA_ADDED, text);
return OPERATOR_FINISHED;
}
static int open_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
Text *text= CTX_data_edit_text(C);
char *path= (text && text->name)? text->name: G.sce;
if(RNA_property_is_set(op->ptr, "filename"))
return open_exec(C, op);
RNA_string_set(op->ptr, "filename", path);
WM_event_add_fileselect(C, op);
return OPERATOR_RUNNING_MODAL;
}
void TEXT_OT_open(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Open";
ot->idname= "TEXT_OT_open";
/* api callbacks */
ot->exec= open_exec;
ot->invoke= open_invoke;
ot->poll= text_new_poll;
/* properties */
RNA_def_string_file_path(ot->srna, "filename", "", FILE_MAX, "Filename", "File path of image to open.");
}
/******************* reload operator *********************/
static int reload_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
if(!reopen_text(text)) {
BKE_report(op->reports, RPT_ERROR, "Could not reopen file");
return OPERATOR_CANCELLED;
}
#ifndef DISABLE_PYTHON
if(text->compiled)
BPY_free_compiled_text(text);
text->compiled = NULL;
#endif
text_update_edited(text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_reload(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Reload";
ot->idname= "TEXT_OT_reload";
/* api callbacks */
ot->exec= reload_exec;
ot->invoke= WM_operator_confirm;
ot->poll= text_edit_poll;
}
/******************* delete operator *********************/
static void text_unlink(Main *bmain, Text *text)
{
bScreen *scr;
ScrArea *area;
SpaceLink *sl;
/* XXX this ifdef is in fact dangerous, if python is
* disabled it will leave invalid pointers in files! */
#ifndef DISABLE_PYTHON
// XXX BPY_clear_bad_scriptlinks(text);
// XXX BPY_free_pyconstraint_links(text);
// XXX free_text_controllers(text);
// XXX free_dome_warp_text(text);
/* check if this text was used as script link:
* this check function unsets the pointers and returns how many
* script links used this Text */
if(0) // XXX BPY_text_check_all_scriptlinks (text))
; // XXX notifier: allqueue(REDRAWBUTSSCRIPT, 0);
/* equivalently for pynodes: */
if(0) // XXX nodeDynamicUnlinkText ((ID*)text))
; // XXX notifier: allqueue(REDRAWNODE, 0);
#endif
for(scr= bmain->screen.first; scr; scr= scr->id.next) {
for(area= scr->areabase.first; area; area= area->next) {
for(sl= area->spacedata.first; sl; sl= sl->next) {
if(sl->spacetype==SPACE_TEXT) {
SpaceText *st= (SpaceText*) sl;
if(st->text==text) {
st->text= NULL;
st->top= 0;
if(st==area->spacedata.first)
ED_area_tag_redraw(area);
}
}
}
}
}
free_libblock(&bmain->text, text);
}
static int unlink_exec(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text= CTX_data_edit_text(C);
/* make the previous text active, if its not there make the next text active */
if(st) {
if(text->id.prev) {
st->text = text->id.prev;
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, st->text);
}
else if(text->id.next) {
st->text = text->id.next;
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, st->text);
}
}
text_unlink(CTX_data_main(C), text);
WM_event_add_notifier(C, NC_TEXT|NA_REMOVED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_unlink(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Unlink";
ot->idname= "TEXT_OT_unlink";
/* api callbacks */
ot->exec= unlink_exec;
ot->invoke= WM_operator_confirm;
ot->poll= text_edit_poll;
}
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/******************* make internal operator *********************/
static int make_internal_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
text->flags |= TXT_ISMEM | TXT_ISDIRTY;
if(text->name) {
MEM_freeN(text->name);
text->name= NULL;
}
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_make_internal(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Make Internal";
ot->idname= "TEXT_OT_make_internal";
/* api callbacks */
ot->exec= make_internal_exec;
ot->poll= text_edit_poll;
}
/******************* save operator *********************/
static int save_poll(bContext *C)
{
Text *text= CTX_data_edit_text(C);
if(!text_edit_poll(C))
return 0;
return (text->name != NULL && !(text->flags & TXT_ISMEM));
}
static void txt_write_file(Text *text, ReportList *reports)
{
FILE *fp;
TextLine *tmp;
struct stat st;
int res;
char file[FILE_MAXDIR+FILE_MAXFILE];
BLI_strncpy(file, text->name, FILE_MAXDIR+FILE_MAXFILE);
BLI_convertstringcode(file, G.sce);
fp= fopen(file, "w");
if(fp==NULL) {
BKE_report(reports, RPT_ERROR, "Unable to save file.");
return;
}
tmp= text->lines.first;
while(tmp) {
if(tmp->next) fprintf(fp, "%s\n", tmp->line);
else fprintf(fp, "%s", tmp->line);
tmp= tmp->next;
}
fclose (fp);
res= stat(file, &st);
text->mtime= st.st_mtime;
if(text->flags & TXT_ISDIRTY)
text->flags ^= TXT_ISDIRTY;
}
static int save_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
txt_write_file(text, op->reports);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_save(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Save";
ot->idname= "TEXT_OT_save";
/* api callbacks */
ot->exec= save_exec;
ot->poll= save_poll;
}
/******************* save as operator *********************/
static int save_as_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
char str[FILE_MAX];
if(!text)
return OPERATOR_CANCELLED;
RNA_string_get(op->ptr, "filename", str);
if(text->name) MEM_freeN(text->name);
text->name= BLI_strdup(str);
text->flags &= ~TXT_ISMEM;
txt_write_file(text, op->reports);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
static int save_as_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
Text *text= CTX_data_edit_text(C);
char *str;
if(RNA_property_is_set(op->ptr, "filename"))
return save_as_exec(C, op);
if(text->name)
str= text->name;
else if(text->flags & TXT_ISMEM)
str= text->id.name+2;
else
str= G.sce;
RNA_string_set(op->ptr, "filename", str);
WM_event_add_fileselect(C, op);
return OPERATOR_RUNNING_MODAL;
}
void TEXT_OT_save_as(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Save As";
ot->idname= "TEXT_OT_save_as";
/* api callbacks */
ot->exec= save_as_exec;
ot->invoke= save_as_invoke;
ot->poll= text_edit_poll;
/* properties */
RNA_def_string_file_path(ot->srna, "filename", "", FILE_MAX, "Filename", "File path to save image to.");
}
/******************* run script operator *********************/
static int run_script_exec(bContext *C, wmOperator *op)
{
#ifdef DISABLE_PYTHON
BKE_report(op->reports, RPT_ERROR, "Python disabled in this build");
return OPERATOR_CANCELLED;
#else
Text *text= CTX_data_edit_text(C);
if (BPY_run_python_script(C, NULL, text, op->reports))
return OPERATOR_FINISHED;
/* Dont report error messages while live editing */
if(!CTX_wm_space_text(C)->live_edit)
BKE_report(op->reports, RPT_ERROR, "Python script fail, look in the console for now...");
return OPERATOR_CANCELLED;
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
#endif
}
void TEXT_OT_run_script(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Run Script";
ot->idname= "TEXT_OT_run_script";
/* api callbacks */
ot->exec= run_script_exec;
ot->poll= text_edit_poll;
}
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/******************* refresh pyconstraints operator *********************/
static int refresh_pyconstraints_exec(bContext *C, wmOperator *op)
{
#ifndef DISABLE_PYTHON
Text *text= CTX_data_edit_text(C);
Scene *scene= CTX_data_scene(C);
Object *ob;
bConstraint *con;
short update;
/* check all pyconstraints */
for(ob= CTX_data_main(C)->object.first; ob; ob= ob->id.next) {
update = 0;
if(ob->type==OB_ARMATURE && ob->pose) {
bPoseChannel *pchan;
for(pchan= ob->pose->chanbase.first; pchan; pchan= pchan->next) {
for(con = pchan->constraints.first; con; con= con->next) {
if(con->type==CONSTRAINT_TYPE_PYTHON) {
bPythonConstraint *data = con->data;
if(data->text==text) BPY_pyconstraint_update(ob, con);
update = 1;
}
}
}
}
for(con = ob->constraints.first; con; con= con->next) {
if(con->type==CONSTRAINT_TYPE_PYTHON) {
bPythonConstraint *data = con->data;
if(data->text==text) BPY_pyconstraint_update(ob, con);
update = 1;
}
}
if(update) {
DAG_object_flush_update(scene, ob, OB_RECALC_DATA);
}
}
#endif
return OPERATOR_FINISHED;
}
void TEXT_OT_refresh_pyconstraints(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Refresh PyConstraints";
ot->idname= "TEXT_OT_refresh_pyconstraints";
/* api callbacks */
ot->exec= refresh_pyconstraints_exec;
ot->poll= text_edit_poll;
}
/******************* paste operator *********************/
static char *txt_copy_selected(Text *text)
{
TextLine *tmp, *linef, *linel;
char *buf= NULL;
int charf, charl, length= 0;
if(!text) return NULL;
if(!text->curl) return NULL;
if(!text->sell) return NULL;
if(!txt_has_sel(text)) return NULL;
if(text->curl==text->sell) {
linef= linel= text->curl;
if(text->curc < text->selc) {
charf= text->curc;
charl= text->selc;
}
else{
charf= text->selc;
charl= text->curc;
}
}
else if(txt_get_span(text->curl, text->sell)<0) {
linef= text->sell;
linel= text->curl;
charf= text->selc;
charl= text->curc;
}
else {
linef= text->curl;
linel= text->sell;
charf= text->curc;
charl= text->selc;
}
if(linef == linel) {
length= charl-charf;
buf= MEM_callocN(length+1, "cut buffera");
BLI_strncpy(buf, linef->line + charf, length+1);
}
else {
length+= linef->len - charf;
length+= charl;
length++; /* For the '\n' */
tmp= linef->next;
while(tmp && tmp!= linel) {
length+= tmp->len+1;
tmp= tmp->next;
}
buf= MEM_callocN(length+1, "cut bufferb");
strncpy(buf, linef->line+ charf, linef->len-charf);
length= linef->len-charf;
buf[length++]='\n';
tmp= linef->next;
while(tmp && tmp!=linel) {
strncpy(buf+length, tmp->line, tmp->len);
length+= tmp->len;
buf[length++]='\n';
tmp= tmp->next;
}
strncpy(buf+length, linel->line, charl);
length+= charl;
buf[length]=0;
}
return buf;
}
static int paste_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
char *buf;
int selection= RNA_boolean_get(op->ptr, "selection");
buf= WM_clipboard_text_get(selection);
if(!buf)
return OPERATOR_CANCELLED;
txt_insert_buf(text, buf);
text_update_edited(text);
MEM_freeN(buf);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
/* run the script while editing, evil but useful */
if(CTX_wm_space_text(C)->live_edit)
run_script_exec(C, op);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
return OPERATOR_FINISHED;
}
void TEXT_OT_paste(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Paste";
ot->idname= "TEXT_OT_paste";
/* api callbacks */
ot->exec= paste_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
/* properties */
RNA_def_boolean(ot->srna, "selection", 0, "Selection", "Paste text selected elsewhere rather than copied, X11 only.");
}
/******************* copy operator *********************/
static void txt_copy_clipboard(Text *text)
{
char *buf;
buf= txt_copy_selected(text);
if(buf) {
WM_clipboard_text_set(buf, 0);
MEM_freeN(buf);
}
}
static int copy_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
txt_copy_clipboard(text);
return OPERATOR_FINISHED;
}
void TEXT_OT_copy(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Copy";
ot->idname= "TEXT_OT_copy";
/* api callbacks */
ot->exec= copy_exec;
ot->poll= text_edit_poll;
}
/******************* cut operator *********************/
static int cut_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
txt_copy_clipboard(text);
txt_delete_selected(text);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
/* run the script while editing, evil but useful */
if(CTX_wm_space_text(C)->live_edit)
run_script_exec(C, op);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
return OPERATOR_FINISHED;
}
void TEXT_OT_cut(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Cut";
ot->idname= "TEXT_OT_cut";
/* api callbacks */
ot->exec= cut_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* indent operator *********************/
static int indent_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
if(txt_has_sel(text)) {
txt_order_cursors(text);
indent(text);
}
else
txt_add_char(text, '\t');
text_update_edited(text);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_indent(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Indent";
ot->idname= "TEXT_OT_indent";
/* api callbacks */
ot->exec= indent_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* unindent operator *********************/
static int unindent_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
if(txt_has_sel(text)) {
txt_order_cursors(text);
unindent(text);
text_update_edited(text);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
return OPERATOR_CANCELLED;
}
void TEXT_OT_unindent(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Unindent";
ot->idname= "TEXT_OT_unindent";
/* api callbacks */
ot->exec= unindent_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* line break operator *********************/
static int line_break_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
int a, curtab;
// double check tabs before splitting the line
curtab= setcurr_tab(text);
txt_split_curline(text);
for(a=0; a < curtab; a++)
txt_add_char(text, '\t');
if(text->curl) {
if(text->curl->prev)
text_update_line_edited(text, text->curl->prev);
text_update_line_edited(text, text->curl);
}
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_CANCELLED;
}
void TEXT_OT_line_break(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Line Break";
ot->idname= "TEXT_OT_line_break";
/* api callbacks */
ot->exec= line_break_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* comment operator *********************/
static int comment_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
if(txt_has_sel(text)) {
txt_order_cursors(text);
comment(text);
text_update_edited(text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
return OPERATOR_CANCELLED;
}
void TEXT_OT_comment(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Comment";
ot->idname= "TEXT_OT_comment";
/* api callbacks */
ot->exec= comment_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* uncomment operator *********************/
static int uncomment_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
if(txt_has_sel(text)) {
txt_order_cursors(text);
uncomment(text);
text_update_edited(text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
return OPERATOR_CANCELLED;
}
void TEXT_OT_uncomment(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Uncomment";
ot->idname= "TEXT_OT_uncomment";
/* api callbacks */
ot->exec= uncomment_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* convert whitespace operator *********************/
enum { TO_SPACES, TO_TABS };
static EnumPropertyItem whitespace_type_items[]= {
{TO_SPACES, "SPACES", 0, "To Spaces", NULL},
{TO_TABS, "TABS", 0, "To Tabs", NULL},
{0, NULL, 0, NULL, NULL}};
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
static int convert_whitespace_exec(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text= CTX_data_edit_text(C);
TextLine *tmp;
FlattenString fs;
size_t a, j;
char *text_check_line, *new_line;
int extra, number; //unknown for now
int type= RNA_enum_get(op->ptr, "type");
tmp = text->lines.first;
//first convert to all space, this make it alot easier to convert to tabs because there is no mixtures of ' ' && '\t'
while(tmp) {
text_check_line = tmp->line;
number = flatten_string(st, &fs, text_check_line)+1;
flatten_string_free(&fs);
new_line = MEM_callocN(number, "Converted_Line");
j = 0;
for(a=0; a < strlen(text_check_line); a++) { //foreach char in line
if(text_check_line[a] == '\t') { //checking for tabs
//get the number of spaces this tabs is showing
//i dont like doing it this way but will look into it later
new_line[j] = '\0';
number = flatten_string(st, &fs, new_line);
flatten_string_free(&fs);
new_line[j] = '\t';
new_line[j+1] = '\0';
number = flatten_string(st, &fs, new_line)-number;
flatten_string_free(&fs);
for(extra = 0; extra < number; extra++) {
new_line[j] = ' ';
j++;
}
}
else {
new_line[j] = text_check_line[a];
++j;
}
}
new_line[j] = '\0';
// put new_line in the tmp->line spot still need to try and set the curc correctly
if(tmp->line) MEM_freeN(tmp->line);
if(tmp->format) MEM_freeN(tmp->format);
tmp->line = new_line;
tmp->len = strlen(new_line);
tmp->format = NULL;
tmp = tmp->next;
}
if(type == TO_TABS) // Converting to tabs
{ //start over from the begining
tmp = text->lines.first;
while(tmp) {
text_check_line = tmp->line;
extra = 0;
for(a = 0; a < strlen(text_check_line); a++) {
number = 0;
for(j = 0; j < (size_t)st->tabnumber; j++) {
if((a+j) <= strlen(text_check_line)) { //check to make sure we are not pass the end of the line
if(text_check_line[a+j] != ' ') {
number = 1;
}
}
}
if(!number) { //found all number of space to equal a tab
a = a+(st->tabnumber-1);
extra = extra+1;
}
}
if( extra > 0 ) { //got tabs make malloc and do what you have to do
new_line = MEM_callocN(strlen(text_check_line)-(((st->tabnumber*extra)-extra)-1), "Converted_Line");
extra = 0; //reuse vars
for(a = 0; a < strlen(text_check_line); a++) {
number = 0;
for(j = 0; j < (size_t)st->tabnumber; j++) {
if((a+j) <= strlen(text_check_line)) { //check to make sure we are not pass the end of the line
if(text_check_line[a+j] != ' ') {
number = 1;
}
}
}
if(!number) { //found all number of space to equal a tab
new_line[extra] = '\t';
a = a+(st->tabnumber-1);
++extra;
}
else { //not adding a tab
new_line[extra] = text_check_line[a];
++extra;
}
}
new_line[extra] = '\0';
// put new_line in the tmp->line spot still need to try and set the curc correctly
if(tmp->line) MEM_freeN(tmp->line);
if(tmp->format) MEM_freeN(tmp->format);
tmp->line = new_line;
tmp->len = strlen(new_line);
tmp->format = NULL;
}
tmp = tmp->next;
}
}
text_update_edited(text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_convert_whitespace(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Convert Whitespace";
ot->idname= "TEXT_OT_convert_whitespace";
/* api callbacks */
ot->exec= convert_whitespace_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
/* properties */
RNA_def_enum(ot->srna, "type", whitespace_type_items, TO_SPACES, "type", "Type of whitespace to convert to.");
}
/******************* select all operator *********************/
static int select_all_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
txt_sel_all(text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_select_all(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Select All";
ot->idname= "TEXT_OT_select_all";
/* api callbacks */
ot->exec= select_all_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* select line operator *********************/
static int select_line_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
txt_sel_line(text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_select_line(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Select Line";
ot->idname= "TEXT_OT_select_line";
/* api clinebacks */
ot->exec= select_line_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* previous marker operator *********************/
static int previous_marker_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
TextMarker *mrk;
int lineno;
lineno= txt_get_span(text->lines.first, text->curl);
mrk= text->markers.last;
while(mrk && (mrk->lineno>lineno || (mrk->lineno==lineno && mrk->end > text->curc)))
mrk= mrk->prev;
if(!mrk) mrk= text->markers.last;
if(mrk) {
txt_move_to(text, mrk->lineno, mrk->start, 0);
txt_move_to(text, mrk->lineno, mrk->end, 1);
}
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_previous_marker(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Previous Marker";
ot->idname= "TEXT_OT_previous_marker";
/* api callbacks */
ot->exec= previous_marker_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* next marker operator *********************/
static int next_marker_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
TextMarker *mrk;
int lineno;
lineno= txt_get_span(text->lines.first, text->curl);
mrk= text->markers.first;
while(mrk && (mrk->lineno<lineno || (mrk->lineno==lineno && mrk->start <= text->curc)))
mrk= mrk->next;
if(!mrk) mrk= text->markers.first;
if(mrk) {
txt_move_to(text, mrk->lineno, mrk->start, 0);
txt_move_to(text, mrk->lineno, mrk->end, 1);
}
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_next_marker(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Next Marker";
ot->idname= "TEXT_OT_next_marker";
/* api callbacks */
ot->exec= next_marker_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* clear all markers operator *********************/
static int clear_all_markers_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
txt_clear_markers(text, 0, 0);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_markers_clear(wmOperatorType *ot)
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
{
/* identifiers */
ot->name= "Clear All Markers";
ot->idname= "TEXT_OT_markers_clear";
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/* api callbacks */
ot->exec= clear_all_markers_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/************************ move operator ************************/
static EnumPropertyItem move_type_items[]= {
{LINE_BEGIN, "LINE_BEGIN", 0, "Line Begin", ""},
{LINE_END, "LINE_END", 0, "Line End", ""},
{FILE_TOP, "FILE_TOP", 0, "File Top", ""},
{FILE_BOTTOM, "FILE_BOTTOM", 0, "File Bottom", ""},
{PREV_CHAR, "PREVIOUS_CHARACTER", 0, "Previous Character", ""},
{NEXT_CHAR, "NEXT_CHARACTER", 0, "Next Character", ""},
{PREV_WORD, "PREVIOUS_WORD", 0, "Previous Word", ""},
{NEXT_WORD, "NEXT_WORD", 0, "Next Word", ""},
{PREV_LINE, "PREVIOUS_LINE", 0, "Previous Line", ""},
{NEXT_LINE, "NEXT_LINE", 0, "Next Line", ""},
{PREV_PAGE, "PREVIOUS_PAGE", 0, "Previous Page", ""},
{NEXT_PAGE, "NEXT_PAGE", 0, "Next Page", ""},
{0, NULL, 0, NULL, NULL}};
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
static void wrap_move_bol(SpaceText *st, ARegion *ar, short sel)
{
Text *text= st->text;
int offl, offc, lin;
text_update_character_width(st);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
lin= txt_get_span(text->lines.first, text->sell);
wrap_offset(st, ar, text->sell, text->selc, &offl, &offc);
if (sel) {
txt_undo_add_toop(text, UNDO_STO, lin, text->selc, lin, -offc);
text->selc= -offc;
} else {
txt_undo_add_toop(text, UNDO_CTO, lin, text->curc, lin, -offc);
text->curc= -offc;
txt_pop_sel(text);
}
}
static void wrap_move_eol(SpaceText *st, ARegion *ar, short sel)
{
Text *text= st->text;
int offl, offc, lin, startl, c;
text_update_character_width(st);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
lin= txt_get_span(text->lines.first, text->sell);
wrap_offset(st, ar, text->sell, text->selc, &offl, &offc);
startl= offl;
c= text->selc;
while (offl==startl && text->sell->line[c]!='\0') {
c++;
wrap_offset(st, ar, text->sell, c, &offl, &offc);
} if (offl!=startl) c--;
if (sel) {
txt_undo_add_toop(text, UNDO_STO, lin, text->selc, lin, c);
text->selc= c;
} else {
txt_undo_add_toop(text, UNDO_CTO, lin, text->curc, lin, c);
text->curc= c;
txt_pop_sel(text);
}
}
static void wrap_move_up(SpaceText *st, ARegion *ar, short sel)
{
Text *text= st->text;
int offl, offl_1, offc, fromline, toline, c, target;
text_update_character_width(st);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
wrap_offset(st, ar, text->sell, 0, &offl_1, &offc);
wrap_offset(st, ar, text->sell, text->selc, &offl, &offc);
fromline= toline= txt_get_span(text->lines.first, text->sell);
target= text->selc + offc;
if (offl==offl_1) {
if (!text->sell->prev) {
txt_move_bol(text, sel);
return;
}
toline--;
c= text->sell->prev->len; /* End of prev. line */
wrap_offset(st, ar, text->sell->prev, c, &offl, &offc);
c= -offc+target;
} else {
c= -offc-1; /* End of prev. line */
wrap_offset(st, ar, text->sell, c, &offl, &offc);
c= -offc+target;
}
if (c<0) c=0;
if (sel) {
txt_undo_add_toop(text, UNDO_STO, fromline, text->selc, toline, c);
if (toline<fromline) text->sell= text->sell->prev;
if(text->sell) {
if (c>text->sell->len) c= text->sell->len;
text->selc= c;
}
}
else if(text->curl) {
txt_undo_add_toop(text, UNDO_CTO, fromline, text->curc, toline, c);
if (toline<fromline) text->curl= text->curl->prev;
if(text->curl) {
if (c>text->curl->len) c= text->curl->len;
text->curc= c;
txt_pop_sel(text);
}
}
}
static void wrap_move_down(SpaceText *st, ARegion *ar, short sel)
{
Text *text= st->text;
int offl, startoff, offc, fromline, toline, c, target;
text_update_character_width(st);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
wrap_offset(st, ar, text->sell, text->selc, &offl, &offc);
fromline= toline= txt_get_span(text->lines.first, text->sell);
target= text->selc + offc;
startoff= offl;
c= text->selc;
while (offl==startoff && text->sell->line[c]!='\0') {
c++;
wrap_offset(st, ar, text->sell, c, &offl, &offc);
}
if (text->sell->line[c]=='\0') {
if (!text->sell->next) {
txt_move_eol(text, sel);
return;
}
toline++;
c= target;
} else {
c += target;
if (c > text->sell->len) c= text->sell->len;
}
if (c<0) c=0;
if (sel) {
txt_undo_add_toop(text, UNDO_STO, fromline, text->selc, toline, c);
if (toline>fromline) text->sell= text->sell->next;
if(text->sell) {
if (c>text->sell->len) c= text->sell->len;
text->selc= c;
}
}
else if(text->curl) {
txt_undo_add_toop(text, UNDO_CTO, fromline, text->curc, toline, c);
if (toline>fromline) text->curl= text->curl->next;
if(text->curl) {
if (c > text->curl->len) c= text->curl->len;
text->curc= c;
txt_pop_sel(text);
}
}
}
/* Moves the cursor vertically by the specified number of lines.
If the destination line is shorter than the current cursor position, the
cursor will be positioned at the end of this line.
This is to replace screen_skip for PageUp/Down operations.
*/
static void cursor_skip(Text *text, int lines, int sel)
{
TextLine **linep;
int oldl, oldc, *charp;
if (sel) linep= &text->sell, charp= &text->selc;
else linep= &text->curl, charp= &text->curc;
oldl= txt_get_span(text->lines.first, *linep);
oldc= *charp;
while (lines>0 && (*linep)->next) {
*linep= (*linep)->next;
lines--;
}
while (lines<0 && (*linep)->prev) {
*linep= (*linep)->prev;
lines++;
}
if (*charp > (*linep)->len) *charp= (*linep)->len;
if (!sel) txt_pop_sel(text);
txt_undo_add_toop(text, sel?UNDO_STO:UNDO_CTO, oldl, oldc, txt_get_span(text->lines.first, *linep), *charp);
}
static int move_cursor(bContext *C, int type, int select)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text= CTX_data_edit_text(C);
ARegion *ar= CTX_wm_region(C);
/* ensure we have the right region, it's optional */
if(ar->regiontype != RGN_TYPE_WINDOW)
ar= NULL;
switch(type) {
case LINE_BEGIN:
if(st && st->wordwrap && ar) wrap_move_bol(st, ar, select);
else txt_move_bol(text, select);
break;
case LINE_END:
if(st && st->wordwrap && ar) wrap_move_eol(st, ar, select);
else txt_move_eol(text, select);
break;
case FILE_TOP:
txt_move_bof(text, select);
break;
case FILE_BOTTOM:
txt_move_eof(text, select);
break;
case PREV_WORD:
txt_jump_left(text, select);
break;
case NEXT_WORD:
txt_jump_right(text, select);
break;
case PREV_CHAR:
txt_move_left(text, select);
break;
case NEXT_CHAR:
txt_move_right(text, select);
break;
case PREV_LINE:
if(st && st->wordwrap && ar) wrap_move_up(st, ar, select);
else txt_move_up(text, select);
break;
case NEXT_LINE:
if(st && st->wordwrap && ar) wrap_move_down(st, ar, select);
else txt_move_down(text, select);
break;
case PREV_PAGE:
if(st) cursor_skip(text, -st->viewlines, select);
else cursor_skip(text, -10, select);
break;
case NEXT_PAGE:
if(st) cursor_skip(text, st->viewlines, select);
else cursor_skip(text, 10, select);
break;
}
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
static int move_exec(bContext *C, wmOperator *op)
{
int type= RNA_enum_get(op->ptr, "type");
return move_cursor(C, type, 0);
}
void TEXT_OT_move(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Move Cursor";
ot->idname= "TEXT_OT_move";
/* api callbacks */
ot->exec= move_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
/* properties */
RNA_def_enum(ot->srna, "type", move_type_items, LINE_BEGIN, "Type", "Where to move cursor to.");
}
/******************* move select operator ********************/
static int move_select_exec(bContext *C, wmOperator *op)
{
int type= RNA_enum_get(op->ptr, "type");
return move_cursor(C, type, 1);
}
void TEXT_OT_move_select(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Move Select";
ot->idname= "TEXT_OT_move_select";
/* api callbacks */
ot->exec= move_select_exec;
ot->poll= text_space_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
/* properties */
RNA_def_enum(ot->srna, "type", move_type_items, LINE_BEGIN, "Type", "Where to move cursor to, to make a selection.");
}
/******************* jump operator *********************/
static int jump_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
int line= RNA_int_get(op->ptr, "line");
short nlines= txt_get_span(text->lines.first, text->lines.last)+1;
if(line < 1 || line > nlines)
return OPERATOR_CANCELLED;
txt_move_toline(text, line-1, 0);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
return OPERATOR_FINISHED;
}
// XXX invoke
// short tmp= txt_get_span(text->lines.first, text->curl)+1;
// button(&tmp, 1, nlines, "Jump to line:"))
void TEXT_OT_jump(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Jump";
ot->idname= "TEXT_OT_jump";
/* api callbacks */
ot->exec= jump_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
/* properties */
RNA_def_int(ot->srna, "line", 1, INT_MAX, 1, "Line", "Line number to jump to.", 1, 10000);
}
/******************* delete operator **********************/
static EnumPropertyItem delete_type_items[]= {
{DEL_NEXT_CHAR, "NEXT_CHARACTER", 0, "Next Character", ""},
{DEL_PREV_CHAR, "PREVIOUS_CHARACTER", 0, "Previous Character", ""},
{DEL_NEXT_WORD, "NEXT_WORD", 0, "Next Word", ""},
{DEL_PREV_WORD, "PREVIOUS_WORD", 0, "Previous Word", ""},
{0, NULL, 0, NULL, NULL}};
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
static int delete_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
int type= RNA_enum_get(op->ptr, "type");
if(type == DEL_PREV_WORD)
txt_backspace_word(text);
else if(type == DEL_PREV_CHAR)
txt_backspace_char(text);
else if(type == DEL_NEXT_WORD)
txt_delete_word(text);
else if(type == DEL_NEXT_CHAR)
txt_delete_char(text);
text_update_line_edited(text, text->curl);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
/* run the script while editing, evil but useful */
if(CTX_wm_space_text(C)->live_edit)
run_script_exec(C, op);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
return OPERATOR_FINISHED;
}
void TEXT_OT_delete(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Delete";
ot->idname= "TEXT_OT_delete";
/* api callbacks */
ot->exec= delete_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
/* properties */
RNA_def_enum(ot->srna, "type", delete_type_items, DEL_NEXT_CHAR, "Type", "Which part of the text to delete.");
}
/******************* toggle overwrite operator **********************/
static int toggle_overwrite_exec(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
st->overwrite= !st->overwrite;
return OPERATOR_FINISHED;
}
void TEXT_OT_overwrite_toggle(wmOperatorType *ot)
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
{
/* identifiers */
ot->name= "Toggle Overwrite";
ot->idname= "TEXT_OT_overwrite_toggle";
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/* api callbacks */
ot->exec= toggle_overwrite_exec;
ot->poll= text_space_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
}
/******************* scroll operator **********************/
/* Moves the view vertically by the specified number of lines */
static void screen_skip(SpaceText *st, int lines)
{
int last;
st->top += lines;
last= txt_get_span(st->text->lines.first, st->text->lines.last);
last= last - (st->viewlines/2);
if(st->top>last) st->top= last;
if(st->top<0) st->top= 0;
}
typedef struct TextScroll {
short old[2];
short hold[2];
short delta[2];
int first;
int characters;
int lines;
int scrollbar;
} TextScroll;
static int scroll_exec(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
int lines= RNA_int_get(op->ptr, "lines");
if(lines == 0)
return OPERATOR_CANCELLED;
screen_skip(st, lines*U.wheellinescroll);
ED_area_tag_redraw(CTX_wm_area(C));
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
return OPERATOR_FINISHED;
}
static int scroll_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
SpaceText *st= CTX_wm_space_text(C);
TextScroll *tsc;
if(RNA_property_is_set(op->ptr, "lines"))
return scroll_exec(C, op);
tsc= MEM_callocN(sizeof(TextScroll), "TextScroll");
tsc->first= 1;
op->customdata= tsc;
st->flags|= ST_SCROLL_SELECT;
WM_event_add_modal_handler(C, &CTX_wm_window(C)->handlers, op);
return OPERATOR_RUNNING_MODAL;
}
static void scroll_apply(bContext *C, wmOperator *op, wmEvent *event)
{
SpaceText *st= CTX_wm_space_text(C);
TextScroll *tsc= op->customdata;
short *mval= event->mval;
text_update_character_width(st);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
if(tsc->first) {
tsc->old[0]= mval[0];
tsc->old[1]= mval[1];
tsc->hold[0]= mval[0];
tsc->hold[1]= mval[1];
tsc->first= 0;
}
if(!tsc->scrollbar) {
tsc->delta[0]= (tsc->hold[0]-mval[0])/st->cwidth;
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
tsc->delta[1]= (mval[1]-tsc->hold[1])/st->lheight;
}
else
tsc->delta[1]= (tsc->hold[1]-mval[1])*st->pix_per_line;
if(tsc->delta[0] || tsc->delta[1]) {
screen_skip(st, tsc->delta[1]);
tsc->lines += tsc->delta[1];
if(st->wordwrap) {
st->left= 0;
}
else {
st->left+= tsc->delta[0];
if(st->left<0) st->left= 0;
}
tsc->hold[0]= mval[0];
tsc->hold[1]= mval[1];
ED_area_tag_redraw(CTX_wm_area(C));
}
tsc->old[0]= mval[0];
tsc->old[1]= mval[1];
}
static void scroll_exit(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
st->flags &= ~ST_SCROLL_SELECT;
MEM_freeN(op->customdata);
}
static int scroll_modal(bContext *C, wmOperator *op, wmEvent *event)
{
switch(event->type) {
case MOUSEMOVE:
scroll_apply(C, op, event);
break;
case LEFTMOUSE:
case RIGHTMOUSE:
case MIDDLEMOUSE:
scroll_exit(C, op);
return OPERATOR_FINISHED;
}
return OPERATOR_RUNNING_MODAL;
}
static int scroll_cancel(bContext *C, wmOperator *op)
{
scroll_exit(C, op);
return OPERATOR_CANCELLED;
}
void TEXT_OT_scroll(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Scroll";
ot->idname= "TEXT_OT_scroll";
/* api callbacks */
ot->exec= scroll_exec;
ot->invoke= scroll_invoke;
ot->modal= scroll_modal;
ot->cancel= scroll_cancel;
ot->poll= text_space_edit_poll;
/* flags */
ot->flag= OPTYPE_BLOCKING;
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/* properties */
RNA_def_int(ot->srna, "lines", 1, INT_MIN, INT_MAX, "Lines", "Number of lines to scroll.", -100, 100);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
}
/******************** scroll bar operator *******************/
static int scroll_bar_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
SpaceText *st= CTX_wm_space_text(C);
ARegion *ar= CTX_wm_region(C);
TextScroll *tsc;
short *mval= event->mval;
if(RNA_property_is_set(op->ptr, "lines"))
return scroll_exec(C, op);
/* verify we are in the right zone */
if(!(mval[0]>2 && mval[0]<20 && mval[1]>2 && mval[1]<ar->winy))
return OPERATOR_PASS_THROUGH;
tsc= MEM_callocN(sizeof(TextScroll), "TextScroll");
tsc->first= 1;
tsc->scrollbar= 1;
op->customdata= tsc;
st->flags|= ST_SCROLL_SELECT;
WM_event_add_modal_handler(C, &CTX_wm_window(C)->handlers, op);
return OPERATOR_RUNNING_MODAL;
}
void TEXT_OT_scroll_bar(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Scrollbar";
ot->idname= "TEXT_OT_scroll_bar";
/* api callbacks */
ot->invoke= scroll_bar_invoke;
ot->modal= scroll_modal;
ot->cancel= scroll_cancel;
ot->poll= text_region_edit_poll;
/* flags */
ot->flag= OPTYPE_BLOCKING;
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/* properties */
RNA_def_int(ot->srna, "lines", 1, INT_MIN, INT_MAX, "Lines", "Number of lines to scroll.", -100, 100);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
}
/******************* set cursor operator **********************/
typedef struct SetCursor {
int selecting;
int selc, sell;
short old[2];
} SetCursor;
static void set_cursor_to_pos(SpaceText *st, ARegion *ar, int x, int y, int sel)
{
FlattenString fs;
Text *text= st->text;
TextLine **linep;
int *charp;
int w;
text_update_character_width(st);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
if(sel) { linep= &text->sell; charp= &text->selc; }
else { linep= &text->curl; charp= &text->curc; }
y= (ar->winy - y)/st->lheight;
if(st->showlinenrs)
x-= TXT_OFFSET+TEXTXLOC;
else
x-= TXT_OFFSET;
if(x<0) x= 0;
x = (x/st->cwidth) + st->left;
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
if(st->wordwrap) {
int i, j, endj, curs, max, chop, start, end, chars, loop;
char ch;
/* Point to first visible line */
*linep= text->lines.first;
for(i=0; i<st->top && (*linep)->next; i++) *linep= (*linep)->next;
max= wrap_width(st, ar);
loop= 1;
while(loop && *linep) {
start= 0;
end= max;
chop= 1;
chars= 0;
curs= 0;
endj= 0;
for(i=0, j=0; loop; j++) {
/* Mimic replacement of tabs */
ch= (*linep)->line[j];
if(ch=='\t') {
chars= st->tabnumber-i%st->tabnumber;
ch= ' ';
}
else
chars= 1;
while(chars--) {
/* Gone too far, go back to last wrap point */
if(y<0) {
*charp= endj;
loop= 0;
break;
/* Exactly at the cursor, done */
}
else if(y==0 && i-start==x) {
*charp= curs= j;
loop= 0;
break;
/* Prepare curs for next wrap */
}
else if(i-end==x) {
curs= j;
}
if(i-start>=max) {
if(chop) endj= j;
y--;
start= end;
end += max;
chop= 1;
if(y==0 && i-start>=x) {
*charp= curs;
loop= 0;
break;
}
}
else if(ch==' ' || ch=='-' || ch=='\0') {
if(y==0 && i-start>=x) {
*charp= curs;
loop= 0;
break;
}
end = i+1;
endj = j;
chop= 0;
}
i++;
}
if(ch=='\0') break;
}
if(!loop || y<0) break;
if(!(*linep)->next) {
*charp= (*linep)->len;
break;
}
/* On correct line but didn't meet cursor, must be at end */
if(y==0) {
*charp= (*linep)->len;
break;
}
*linep= (*linep)->next;
y--;
}
}
else {
y-= txt_get_span(text->lines.first, *linep) - st->top;
if(y>0) {
while(y-- != 0) if((*linep)->next) *linep= (*linep)->next;
}
else if(y<0) {
while(y++ != 0) if((*linep)->prev) *linep= (*linep)->prev;
}
w= flatten_string(st, &fs, (*linep)->line);
if(x<w) *charp= fs.accum[x];
else *charp= (*linep)->len;
flatten_string_free(&fs);
}
if(!sel) txt_pop_sel(text);
}
static void set_cursor_apply(bContext *C, wmOperator *op, wmEvent *event)
{
SpaceText *st= CTX_wm_space_text(C);
ARegion *ar= CTX_wm_region(C);
SetCursor *scu= op->customdata;
if(event->mval[1]<0 || event->mval[1]>ar->winy) {
int d= (scu->old[1]-event->mval[1])*st->pix_per_line;
if(d) screen_skip(st, d);
set_cursor_to_pos(st, ar, event->mval[0], event->mval[1]<0?0:ar->winy, 1);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, st->text);
}
else if(!st->wordwrap && (event->mval[0]<0 || event->mval[0]>ar->winx)) {
if(event->mval[0]>ar->winx) st->left++;
else if(event->mval[0]<0 && st->left>0) st->left--;
set_cursor_to_pos(st, ar, event->mval[0], event->mval[1], 1);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, st->text);
// XXX PIL_sleep_ms(10);
}
else {
set_cursor_to_pos(st, ar, event->mval[0], event->mval[1], 1);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, st->text);
scu->old[0]= event->mval[0];
scu->old[1]= event->mval[1];
}
}
static void set_cursor_exit(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text= st->text;
SetCursor *scu= op->customdata;
int linep2, charp2;
char *buffer;
if(txt_has_sel(text)) {
buffer = txt_sel_to_buf(text);
WM_clipboard_text_set(buffer, 1);
MEM_freeN(buffer);
}
linep2= txt_get_span(st->text->lines.first, st->text->sell);
charp2= st->text->selc;
if(scu->sell!=linep2 || scu->selc!=charp2)
txt_undo_add_toop(st->text, UNDO_STO, scu->sell, scu->selc, linep2, charp2);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, st->text);
MEM_freeN(scu);
}
static int set_cursor_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
SpaceText *st= CTX_wm_space_text(C);
ARegion *ar= CTX_wm_region(C);
SetCursor *scu;
op->customdata= MEM_callocN(sizeof(SetCursor), "SetCursor");
scu= op->customdata;
scu->selecting= RNA_boolean_get(op->ptr, "select");
scu->old[0]= event->mval[0];
scu->old[1]= event->mval[1];
if(!scu->selecting) {
int curl= txt_get_span(st->text->lines.first, st->text->curl);
int curc= st->text->curc;
int linep2, charp2;
set_cursor_to_pos(st, ar, event->mval[0], event->mval[1], 0);
linep2= txt_get_span(st->text->lines.first, st->text->curl);
charp2= st->text->selc;
if(curl!=linep2 || curc!=charp2)
txt_undo_add_toop(st->text, UNDO_CTO, curl, curc, linep2, charp2);
}
scu->sell= txt_get_span(st->text->lines.first, st->text->sell);
scu->selc= st->text->selc;
WM_event_add_modal_handler(C, &CTX_wm_window(C)->handlers, op);
set_cursor_apply(C, op, event);
return OPERATOR_RUNNING_MODAL;
}
static int set_cursor_modal(bContext *C, wmOperator *op, wmEvent *event)
{
switch(event->type) {
case LEFTMOUSE:
case MIDDLEMOUSE:
case RIGHTMOUSE:
set_cursor_exit(C, op);
return OPERATOR_FINISHED;
case MOUSEMOVE:
set_cursor_apply(C, op, event);
break;
}
return OPERATOR_RUNNING_MODAL;
}
static int set_cursor_cancel(bContext *C, wmOperator *op)
{
set_cursor_exit(C, op);
return OPERATOR_FINISHED;
}
void TEXT_OT_cursor_set(wmOperatorType *ot)
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
{
/* identifiers */
ot->name= "Set Cursor";
ot->idname= "TEXT_OT_cursor_set";
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/* api callbacks */
ot->invoke= set_cursor_invoke;
ot->modal= set_cursor_modal;
ot->cancel= set_cursor_cancel;
ot->poll= text_region_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER|OPTYPE_BLOCKING;
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/* properties */
RNA_def_boolean(ot->srna, "select", 0, "Select", "Set selection end rather than cursor.");
}
/******************* line number operator **********************/
static int line_number_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text= CTX_data_edit_text(C);
ARegion *ar= CTX_wm_region(C);
short *mval= event->mval;
double time;
static int jump_to= 0;
static double last_jump= 0;
if(!st->showlinenrs)
return OPERATOR_PASS_THROUGH;
if(!(mval[0]>2 && mval[0]<60 && mval[1]>2 && mval[1]<ar->winy-2))
return OPERATOR_PASS_THROUGH;
if(!(event->ascii>='0' && event->ascii<='9'))
return OPERATOR_PASS_THROUGH;
time = PIL_check_seconds_timer();
if(last_jump < time-1)
jump_to= 0;
jump_to *= 10;
jump_to += (int)(event->ascii-'0');
txt_move_toline(text, jump_to-1, 0);
last_jump= time;
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
return OPERATOR_FINISHED;
}
void TEXT_OT_line_number(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Line Number";
ot->idname= "TEXT_OT_line_number";
/* api callbacks */
ot->invoke= line_number_invoke;
ot->poll= text_region_edit_poll;
}
/******************* insert operator **********************/
static int insert_exec(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text= CTX_data_edit_text(C);
char *str;
int done, ascii;
str= RNA_string_get_alloc(op->ptr, "text", NULL, 0);
ascii= str[0];
MEM_freeN(str);
if(!ascii)
return OPERATOR_CANCELLED;
if(st && st->overwrite)
done= txt_replace_char(text, ascii);
else
done= txt_add_char(text, ascii);
if(!done)
return OPERATOR_CANCELLED;
text_update_line_edited(text, text->curl);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
return OPERATOR_FINISHED;
}
static int insert_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
char str[2];
int ret;
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/* XXX old code from winqreadtextspace, is it still needed somewhere? */
/* smartass code to prevent the CTRL/ALT events below from not working! */
/*if(qual & (LR_ALTKEY|LR_CTRLKEY))
if(!ispunct(ascii))
ascii= 0;*/
str[0]= event->ascii;
str[1]= '\0';
RNA_string_set(op->ptr, "text", str);
ret = insert_exec(C, op);
/* run the script while editing, evil but useful */
if(ret==OPERATOR_FINISHED && CTX_wm_space_text(C)->live_edit)
run_script_exec(C, op);
return ret;
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
}
void TEXT_OT_insert(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Insert";
ot->idname= "TEXT_OT_insert";
/* api callbacks */
ot->exec= insert_exec;
ot->invoke= insert_invoke;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER;
/* properties */
RNA_def_string(ot->srna, "text", "", 0, "Text", "Text to insert at the cursor position.");
}
/******************* find operator *********************/
/* mode */
#define TEXT_FIND 0
#define TEXT_REPLACE 1
#define TEXT_MARK_ALL 2
static int find_and_replace(bContext *C, wmOperator *op, short mode)
{
SpaceText *st= CTX_wm_space_text(C);
Text *start= NULL, *text= st->text;
int flags, first= 1;
char *tmp;
if(!st->findstr[0] || (mode == TEXT_REPLACE && !st->replacestr[0]))
return OPERATOR_CANCELLED;
flags= st->flags;
if(flags & ST_FIND_ALL)
flags ^= ST_FIND_WRAP;
do {
if(first)
txt_clear_markers(text, TMARK_GRP_FINDALL, 0);
first= 0;
/* Replace current */
if(mode!=TEXT_FIND && txt_has_sel(text)) {
tmp= txt_sel_to_buf(text);
if(strcmp(st->findstr, tmp)==0) {
if(mode==TEXT_REPLACE) {
txt_insert_buf(text, st->replacestr);
if(text->curl && text->curl->format) {
MEM_freeN(text->curl->format);
text->curl->format= NULL;
}
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
}
else if(mode==TEXT_MARK_ALL) {
char color[4];
UI_GetThemeColor4ubv(TH_SHADE2, color);
if(txt_find_marker(text, text->curl, text->selc, TMARK_GRP_FINDALL, 0)) {
if(tmp) MEM_freeN(tmp), tmp=NULL;
break;
}
txt_add_marker(text, text->curl, text->curc, text->selc, color, TMARK_GRP_FINDALL, TMARK_EDITALL);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
}
}
MEM_freeN(tmp);
tmp= NULL;
}
/* Find next */
if(txt_find_string(text, st->findstr, flags & ST_FIND_WRAP)) {
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
}
else if(flags & ST_FIND_ALL) {
if(text==start) break;
if(!start) start= text;
if(text->id.next)
text= st->text= text->id.next;
else
text= st->text= G.main->text.first;
txt_move_toline(text, 0, 0);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
first= 1;
}
else {
BKE_reportf(op->reports, RPT_INFO, "Text not found: %s", st->findstr);
break;
}
} while(mode==TEXT_MARK_ALL);
return OPERATOR_FINISHED;
}
static int find_exec(bContext *C, wmOperator *op)
{
return find_and_replace(C, op, TEXT_FIND);
}
void TEXT_OT_find(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Find";
ot->idname= "TEXT_OT_find";
/* api callbacks */
ot->exec= find_exec;
ot->poll= text_space_edit_poll;
}
/******************* replace operator *********************/
static int replace_exec(bContext *C, wmOperator *op)
{
return find_and_replace(C, op, TEXT_REPLACE);
}
void TEXT_OT_replace(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Replace";
ot->idname= "TEXT_OT_replace";
/* api callbacks */
ot->exec= replace_exec;
ot->poll= text_space_edit_poll;
}
/******************* mark all operator *********************/
static int mark_all_exec(bContext *C, wmOperator *op)
{
return find_and_replace(C, op, TEXT_MARK_ALL);
}
void TEXT_OT_mark_all(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Mark All";
ot->idname= "TEXT_OT_mark_all";
/* api callbacks */
ot->exec= mark_all_exec;
ot->poll= text_space_edit_poll;
}
/******************* find set selected *********************/
static int find_set_selected_exec(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text= CTX_data_edit_text(C);
char *tmp;
tmp= txt_sel_to_buf(text);
BLI_strncpy(st->findstr, tmp, ST_MAX_FIND_STR);
MEM_freeN(tmp);
if(!st->findstr[0])
return OPERATOR_FINISHED;
return find_and_replace(C, op, TEXT_FIND);
}
void TEXT_OT_find_set_selected(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Find Set Selected";
ot->idname= "TEXT_OT_find_set_selected";
/* api callbacks */
ot->exec= find_set_selected_exec;
ot->poll= text_space_edit_poll;
}
/******************* replace set selected *********************/
static int replace_set_selected_exec(bContext *C, wmOperator *op)
{
SpaceText *st= CTX_wm_space_text(C);
Text *text= CTX_data_edit_text(C);
char *tmp;
tmp= txt_sel_to_buf(text);
BLI_strncpy(st->replacestr, tmp, ST_MAX_FIND_STR);
MEM_freeN(tmp);
return OPERATOR_FINISHED;
}
void TEXT_OT_replace_set_selected(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Replace Set Selected";
ot->idname= "TEXT_OT_replace_set_selected";
/* api callbacks */
ot->exec= replace_set_selected_exec;
ot->poll= text_space_edit_poll;
}
/****************** resolve conflict operator ******************/
enum { RESOLVE_IGNORE, RESOLVE_RELOAD, RESOLVE_SAVE, RESOLVE_MAKE_INTERNAL };
static EnumPropertyItem resolution_items[]= {
{RESOLVE_IGNORE, "IGNORE", 0, "Ignore", ""},
{RESOLVE_RELOAD, "RELOAD", 0, "Reload", ""},
{RESOLVE_SAVE, "SAVE", 0, "Save", ""},
{RESOLVE_MAKE_INTERNAL, "MAKE_INTERNAL", 0, "Make Internal", ""},
{0, NULL, 0, NULL, NULL}};
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/* returns 0 if file on disk is the same or Text is in memory only
returns 1 if file has been modified on disk since last local edit
returns 2 if file on disk has been deleted
-1 is returned if an error occurs */
int text_file_modified(Text *text)
{
struct stat st;
int result;
char file[FILE_MAXDIR+FILE_MAXFILE];
if(!text || !text->name)
return 0;
BLI_strncpy(file, text->name, FILE_MAXDIR+FILE_MAXFILE);
BLI_convertstringcode(file, G.sce);
if(!BLI_exists(file))
return 2;
result = stat(file, &st);
if(result == -1)
return -1;
if((st.st_mode & S_IFMT) != S_IFREG)
return -1;
if(st.st_mtime > text->mtime)
return 1;
return 0;
}
static void text_ignore_modified(Text *text)
{
struct stat st;
int result;
char file[FILE_MAXDIR+FILE_MAXFILE];
if(!text || !text->name) return;
BLI_strncpy(file, text->name, FILE_MAXDIR+FILE_MAXFILE);
BLI_convertstringcode(file, G.sce);
if(!BLI_exists(file)) return;
result = stat(file, &st);
if(result == -1 || (st.st_mode & S_IFMT) != S_IFREG)
return;
text->mtime= st.st_mtime;
}
static int resolve_conflict_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
int resolution= RNA_enum_get(op->ptr, "resolution");
switch(resolution) {
case RESOLVE_RELOAD:
return reload_exec(C, op);
case RESOLVE_SAVE:
return save_exec(C, op);
case RESOLVE_MAKE_INTERNAL:
return make_internal_exec(C, op);
case RESOLVE_IGNORE:
text_ignore_modified(text);
return OPERATOR_FINISHED;
}
return OPERATOR_CANCELLED;
}
static int resolve_conflict_invoke(bContext *C, wmOperator *op, wmEvent *event)
{
Text *text= CTX_data_edit_text(C);
uiPopupMenu *pup;
uiLayout *layout;
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
switch(text_file_modified(text)) {
case 1:
if(text->flags & TXT_ISDIRTY) {
/* modified locally and externally, ahhh. offer more possibilites. */
UI: Layout Engine * Buttons are now created first, and after that the layout is computed. This means the layout engine now works at button level, and makes it easier to write templates. Otherwise you had to store all info and create the buttons later. * Added interface_templates.c as a separate file to put templates in. These can contain regular buttons, and can be put in a Free layout, which means you can specify manual coordinates, but still get nested correct inside other layouts. * API was changed to allow better nesting. Previously items were added in the last added layout specifier, i.e. one level up in the layout hierarchy. This doesn't work well in always, so now when creating things like rows or columns it always returns a layout which you have to add the items in. All py scripts were updated to follow this. * Computing the layout now goes in two passes, first estimating the required width/height of all nested layouts, and then in the second pass using the results of that to decide on the actual locations. * Enum and array buttons now follow the direction of the layout, i.e. they are vertical or horizontal depending if they are in a column or row. * Color properties now get a color picker, and only get the additional RGB sliders with Expand=True. * File/directory string properties now get a button next to them for opening the file browse, though this is not implemented yet. * Layout items can now be aligned, set align=True when creating a column, row, etc. * Buttons now get a minimum width of one icon (avoids squashing icon buttons). * Moved some more space variables into Style.
2009-05-15 13:19:59 +02:00
pup= uiPupMenuBegin(C, "File Modified Outside and Inside Blender", 0);
layout= uiPupMenuLayout(pup);
uiItemEnumO(layout, "Reload from disk (ignore local changes)", 0, op->type->idname, "resolution", RESOLVE_RELOAD);
uiItemEnumO(layout, "Save to disk (ignore outside changes)", 0, op->type->idname, "resolution", RESOLVE_SAVE);
uiItemEnumO(layout, "Make text internal (separate copy)", 0, op->type->idname, "resolution", RESOLVE_MAKE_INTERNAL);
uiPupMenuEnd(C, pup);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
}
else {
UI: Layout Engine * Buttons are now created first, and after that the layout is computed. This means the layout engine now works at button level, and makes it easier to write templates. Otherwise you had to store all info and create the buttons later. * Added interface_templates.c as a separate file to put templates in. These can contain regular buttons, and can be put in a Free layout, which means you can specify manual coordinates, but still get nested correct inside other layouts. * API was changed to allow better nesting. Previously items were added in the last added layout specifier, i.e. one level up in the layout hierarchy. This doesn't work well in always, so now when creating things like rows or columns it always returns a layout which you have to add the items in. All py scripts were updated to follow this. * Computing the layout now goes in two passes, first estimating the required width/height of all nested layouts, and then in the second pass using the results of that to decide on the actual locations. * Enum and array buttons now follow the direction of the layout, i.e. they are vertical or horizontal depending if they are in a column or row. * Color properties now get a color picker, and only get the additional RGB sliders with Expand=True. * File/directory string properties now get a button next to them for opening the file browse, though this is not implemented yet. * Layout items can now be aligned, set align=True when creating a column, row, etc. * Buttons now get a minimum width of one icon (avoids squashing icon buttons). * Moved some more space variables into Style.
2009-05-15 13:19:59 +02:00
pup= uiPupMenuBegin(C, "File Modified Outside Blender", 0);
layout= uiPupMenuLayout(pup);
uiItemEnumO(layout, "Reload from disk", 0, op->type->idname, "resolution", RESOLVE_RELOAD);
uiItemEnumO(layout, "Make text internal (separate copy)", 0, op->type->idname, "resolution", RESOLVE_MAKE_INTERNAL);
uiItemEnumO(layout, "Ignore", 0, op->type->idname, "resolution", RESOLVE_IGNORE);
uiPupMenuEnd(C, pup);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
}
break;
case 2:
UI: Layout Engine * Buttons are now created first, and after that the layout is computed. This means the layout engine now works at button level, and makes it easier to write templates. Otherwise you had to store all info and create the buttons later. * Added interface_templates.c as a separate file to put templates in. These can contain regular buttons, and can be put in a Free layout, which means you can specify manual coordinates, but still get nested correct inside other layouts. * API was changed to allow better nesting. Previously items were added in the last added layout specifier, i.e. one level up in the layout hierarchy. This doesn't work well in always, so now when creating things like rows or columns it always returns a layout which you have to add the items in. All py scripts were updated to follow this. * Computing the layout now goes in two passes, first estimating the required width/height of all nested layouts, and then in the second pass using the results of that to decide on the actual locations. * Enum and array buttons now follow the direction of the layout, i.e. they are vertical or horizontal depending if they are in a column or row. * Color properties now get a color picker, and only get the additional RGB sliders with Expand=True. * File/directory string properties now get a button next to them for opening the file browse, though this is not implemented yet. * Layout items can now be aligned, set align=True when creating a column, row, etc. * Buttons now get a minimum width of one icon (avoids squashing icon buttons). * Moved some more space variables into Style.
2009-05-15 13:19:59 +02:00
pup= uiPupMenuBegin(C, "File Deleted Outside Blender", 0);
layout= uiPupMenuLayout(pup);
uiItemEnumO(layout, "Make text internal", 0, op->type->idname, "resolution", RESOLVE_MAKE_INTERNAL);
uiItemEnumO(layout, "Recreate file", 0, op->type->idname, "resolution", RESOLVE_SAVE);
uiPupMenuEnd(C, pup);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
break;
}
return OPERATOR_CANCELLED;
}
void TEXT_OT_resolve_conflict(wmOperatorType *ot)
{
/* identifiers */
ot->name= "Resolve Conflict";
ot->idname= "TEXT_OT_resolve_conflict";
ot->description= "When external text is out of sync, resolve the conflict.";
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/* api callbacks */
ot->exec= resolve_conflict_exec;
ot->invoke= resolve_conflict_invoke;
ot->poll= save_poll;
/* properties */
RNA_def_enum(ot->srna, "resolution", resolution_items, RESOLVE_IGNORE, "Resolution", "How to solve conflict due to different in internal and external text.");
}
/********************** to 3d object operator *****************/
static int to_3d_object_exec(bContext *C, wmOperator *op)
{
Text *text= CTX_data_edit_text(C);
int split_lines= RNA_boolean_get(op->ptr, "split_lines");
ED_text_to_object(C, text, split_lines);
return OPERATOR_FINISHED;
}
void TEXT_OT_to_3d_object(wmOperatorType *ot)
{
/* identifiers */
ot->name= "To 3D Object";
ot->idname= "TEXT_OT_to_3d_object";
/* api callbacks */
ot->exec= to_3d_object_exec;
ot->poll= text_edit_poll;
/* flags */
ot->flag= OPTYPE_REGISTER|OPTYPE_UNDO;
/* properties */
RNA_def_boolean(ot->srna, "split_lines", 0, "Split Lines", "Create one object per line in the text.");
}
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-03-01 00:33:35 +01:00
/************************ undo ******************************/
void ED_text_undo_step(bContext *C, int step)
{
Text *text= CTX_data_edit_text(C);
if(!text)
return;
if(step==1)
txt_do_undo(text);
else if(step==-1)
txt_do_redo(text);
text_update_edited(text);
WM_event_add_notifier(C, NC_TEXT|ND_CURSOR, text);
WM_event_add_notifier(C, NC_TEXT|NA_EDITED, text);
}