This implements the main aspects of changes to blendfile compatibility
as designed in #109151:
* Blender files which file minversion is newer than current Blender
executable won't be loaded at all.
* Blender files which file version is newer than current Blender will
triger systematic warning to user:
* In the status info bar (lower right corner in default UI).
* When attempting to save (overwrite) them.
This means that the file minversion becomes a hard limit, and not a
soft, warning-only as it used to be. Further more, forward compatibility
warning is now systematic (instead of depending on file minversion),
and more visible for users.
See also https://wiki.blender.org/wiki/Process/Compatibility_Handling
for details over the new policy.
Technically:
* Opening any file with a minversion newer than current Blender file one
now triggers an early abort, with an error message reported to the user.
This is handled by a new utils called from `blo_decode_and_check`.
* Any file newer than current Blender version sets a new
`has_forward_compatibility_issues` flag in Main struct at read time.
* Status bar info area is turned into a template, which uses this flag
to display special warning UI and tooltip when set.
* A new confirmation popup appears when user tries to save (overwrite)
such a 'newer' blendfile, stating potential loos of data, and
proposing by default to 'save as' instead.
* The 'quit unsaved' popup has also been updated to 'save as' instead of
'save' when the edited file is has potential forward compitibility
issues.
Part of #109151 (PR !110109).
This data-block was originally added in eb4e3bbe68.
However, that original plan wasn't fully implemented, with simulations
now integrated with geometry nodes and modifiers instead of a separate
data-block. We kept the data-block around anyway since we have the
loose plan of using a similar data-block to make global simulations
connected between multiple objects. But it may be a while before we
implement that, and in the meantime having this just causes confusion.
This new namemap allows to generate new ID names which are unique in
current Main (for a given ID type), regardless of the library they
belong to.
This new feature will be used by library override to try to reduce name
collisions with its linked reference IDs when more than one override
exists. It is not intended to be used for general ID naming.
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
Adds the initial stage for the grease pencil 3.0 project.
This patch includes:
* New ID and new object type.
* New DNA structures.
* New drawing engine for grease pencil (gpencil-next).
* Tests for the new grease pencil data-type.
* A few operators for conversion, switching modes and (simple) drawing.
Exposed to the user:
* An experimental option to switch to the new grease pencil.
* This will switch the grease pencil render engine to gpencil-next which can only render the new object type.
Current grease pencil objects will no longer render.
* Changing this option currently requires a restart of blender (for the keymap to update).
* A conversion setting in the `Object` > `Convert To` operator.
* A drawing operator in `Draw Mode`.
Pull Request: https://projects.blender.org/blender/blender/pulls/106848
This function handles cleaning valid system paths that are functional
when passed to `open(..)` but may be relative to the current working
directory or have redundant slashers that can be normalized.
The logic in the initial commit (97dd107070) was broken in some cases,
and would end up tagging as unused IDs that had valid usages. It is
reverted by this commit..
For this new solution to #98029 (deleting unused archipelagos of data),
the logic handling dependency loops detection is reworked to rely on a
new tag in the relations entry of the relevant IDs, instead of
pre-tagging as unused the ID itself.
Further more, when a dependency loop is detected, the IDs in it cannot
be immediately tagged as unused, since it may be that the entry point
of that loop is later detected as actually used. So their relations
entries are not tagged as processed, and only the entry point of the
potential archipelago can be checked in that case, outside of the
recursive processing of dependencies.
The other IDs of the archipelago will then be processed again later, in
a state where at least one ID in the archipelago has a known state for
sure, which then allows for a safe evaluation of the other related data.
This commit should be backported to 3.3LTS.
This commit introduces a new Main boolean flag that marks is as invalid.
Higher-level file reading code does checks on this flag to abort reading
process if needed.
This is an implementation of the #105083 design task.
Given the extense of the change, I do not think this should be
considered for 3.5 and previous LTS releases.
Blender is using more and more temporary Main data-base (historically
for reading linked data, but also now when resyncing liboverrides, for
temp data in asset code, etc.).
This commit aims at making this a bit more formal and defined, by:
* Adding a dedicated flag in Main struct to mark a Main as global.
* Adding some API to replace, or temporarily swap the current global
Main (`G_MAIN`) by another one.
NOTE: Having to temporarily replace `G_MAIN` is a workaround for the
limitation of current RNA, ideally this should be fixed in RNA itself,
but for now at least having an API helps tracking those cases (since
this is potentially risky operation).
This work is also a preparation for more usages of temp mains in the near
future (Asset Brushes and its presets system e.g. will most likely use
temp mains too).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15977
An implementation of T73412, roughly as outlined there:
Track the names that are in use, as well as base names (before
numeric suffix) plus a bit map for each base name, indicating which
numeric suffixes are already used. This is done per-Main/Library,
per-object-type.
Timings (Windows, VS2022 Release build, AMD Ryzen 5950X):
- Scene with 10k cubes, Shift+D to duplicate them all: 8.7s -> 1.9s.
Name map memory usage for resulting 20k objects: 4.3MB.
- Importing a 2.5GB .obj file of exported Blender 3.0 splash scene
(24k objects), using the new C++ importer: 34.2s-> 22.0s. Name map
memory usage for resulting scene: 8.6MB.
- Importing Disney Moana USD scene (almost half a million objects):
56min -> 10min. Name map usage: ~100MB. Blender crashes later on
when trying to render it, in the same place in both cases, but
that's for another day.
Reviewed By: Bastien Montagne
Differential Revision: https://developer.blender.org/D14162
In some cases, it can be usefull to distinguish when an entry has been
processed in which direction (`to` when handling ID pointers used by
the entry, `from` when handling ID using this entry).
Previous `MAINIDRELATIONS_ENTRY_TAGS_PROCESSED` tag is now a combination
of the two new ones.
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
In almost all cases there is no difference between `G.relbase_valid`
and checking `G.main->filepath` isn't an empty string.
In many places a non-empty string is already being used instead of
`G.relbase_valid`.
The only situation where this was needed was when saving from
`wm_file_write` where they temporarily became out of sync.
This has been replaced by adding a new member to `BlendFileWriteParams`
to account for saving an unsaved file for the first time.
Reviewed By: brecht
Ref D13564
Use "filepath" which is the current convention for naming full paths.
- Main use "name" which isn't obviously a file path.
- BlendFileData & FileGlobal used "filename" which is often
used for the name component of a path (without the directory).
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
The drag and drop feature of objects in 3D View has been modified to include:
- Snap the object being dragged.
- Visual feedback through a box and the placement tool grid.
Maniphest Tasks: T90198
Differential Revision: https://developer.blender.org/D12912
This commit adds to ID struct a new optional 'weak reference' to a
linked ID (in the form of a blend file library path and full ID name).
This can then be used on next append to try to find a matching local ID
instead of re-making the linked data local again.
Ref. T90545
NOTE: ID re-use will be disabled for regular append for the time being
(3.0 release), and only used for assets. Therefore, this commit should
not change anything user-wise.
Differential Revision: https://developer.blender.org/D12545
Ths commit adds a new `IDNameLibMap` to `Main`, used during file reading
to quickly find already read linked IDs.
Without that, search would use string-based search over list of linked
data, which becomes extremely slow and inneficient in cases where a lot
of IDs are linked from a same library. See also {T89194}.
Extrem-usecase reported in T89194 is now about 4 times faster in linked
data reading (about 2 times faster for the whole .blend file loading).
More normal cases (like Sprites studio production files) have barely
measurable speed improvements, a few percents at best.
NOTE: `main_idmap` API was extended to support insertion and removal of
IDs from the mapping, avoids having to re-create the whole thing several
time during libraries expansion in readcode.
Differential Revision: https://developer.blender.org/D11757
The `MAX_LIBARRAY` define was an annoying doublon to the `INDEX_ID_MAX` enum value
now defined in `DNA_ID.h`, and it is no more useful.
And comments were somewhat outdated. Also added an explanation about
chosen order for the `INDEX_ID_<IDTYPE>` order.
`bmain.relations` is used to store temp data of relations between IDs,
to speed-up some complex processes heavily relying on such information.
Previous implementation was failry unclear/confusing, and required a
not-so-nice hack to 'tag' some ID as processed.
New code changes as such:
* Using `from`/`to` naming (instead of `user`/`used`).
* More clear separation between `to` `id_pointer` and `from` one,
using an union instead of hacking around difference between `ID *` and
`ID **` pointers.
* Adds storage of `session_uuid` informations (mainly useful as
debug/ensuring proper consistency of data currently).
* Adds a structure per ID in the mapping. This enables possibility of
storing tags (and potentially more data in the future) per-ID,
without polluting the IDs themselves with very short-life info.
Differential Revision: https://developer.blender.org/D10164
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
The file subversion is no longer used in the Python API or user interface,
and is now internal to Blender.
User interface, Python API and file I/O metadata now use more consistent
formatting for version numbers. Official releases use "2.83.0", "2.83.1",
and releases under development use "2.90.0 Alpha", "2.90.0 Beta".
Some Python add-ons may need to lower the Blender version in bl_info to
(2, 83, 0) or (2, 90, 0) if they used a subversion number higher than 0.
https://wiki.blender.org/wiki/Reference/Release_Notes/2.83/Python_API#Compatibility
This change is in preparation of LTS releases, and also brings us more
in line with semantic versioning.
Fixes T76058.
Differential Revision: https://developer.blender.org/D7748
This removes grease pencil brush creation/dat-block delete on load,
since this causes duplicate data-blocks.
Add assert to prevent this happening in the future
since the error is isn't obvious.
This data block will be the container for simulation node trees.
It will be used for the new particle node system (T73324).
The new data block has the type `ID_SIM`.
It is not visible to users and other developers by default yet.
To enable it, activate the cmake option `WITH_NEW_SIMULATION_TYPE`.
New simulation data blocks can be created by running `bpy.data.simulations.new("name")`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D7225
The feature is hidden behind an experimental option, you'll have to
enable it in the preferences to try it.
This feature is not yet considered fully stable, crashes may happen, as
well as .blend file corruptions (very unlikely, but still possible).
In a nutshell, the ideas behind this code are to:
* Detect unchanged IDs across an undo step.
* Reuse as much as possible existing IDs memory, even when its content
did change.
* Re-use existing depsgraphs instead of building new ones from scratch.
* Store accumulated recalc flags, to avoid needless re-compute of things
that did not change, when the ID itself is detected as modified.
See T60695 and D6580 for more technical details.
Bastien Montagne
Hans Goudey
Sergey Sharybin
Falk David
Campbell Barton
Falk David
Bastien Montagne
Aras Pranckevicius
Campbell Barton
Germano Cavalcante
Harley Acheson
Sebastian Parborg
Jacques Lucke
Brecht Van Lommel
Brecht Van Lommel
Brecht Van Lommel
Bastien Montagne