This enables ASAN support when used with VS 16.9
enable as usual in cmake with the WITH_COMPILER_ASAN
option, or when using make.bat just tag on `asan'
to the invocation, ie: `make lite 2019 asan`
MSVC: Asan support for 16.9
This enables ASAN support when used with VS 16.9
enable as usual in cmake with the WITH_COMPILER_ASAN
option, or when using make.bat just tag on `asan'
to the invocation, ie: `make lite 2019 asan`
Differential Revision: https://developer.blender.org/D7794
Reviewed By: brecht, sergey
Changes made:
* Add OpenMP linker flags.
* Copy the libomp.dylib to `2.93/lib/libomp.dylib`.
* Change the `LC_LOAD_DYLIB` item such that
the lib is found at `bpy.so/../../Resources/2.93/lib/libomp.dylib`.
Installation is done by D10664.
Reviewed By: #platform_macos, brecht
Maniphest Tasks: T86579
Differential Revision: https://developer.blender.org/D10657
This bumps OSL to 1.11.10.0. OSL Has a new build time
dependency: Clang, and more importantly it expects
clang and llvm to share a library folder, which it
previously for us did not.
This patch changes:
-OSL Update to 1.11.10.0
-refactor the llvm/clang/clang-tools-extra builds into the llvm
build using the llvm-project tarball for building that has all
of the subprojects in it.
-update ispc/openmp builds since clang no longer its own dependency
and they have to depend on the llvm build now.
-Update the windows builder to use the 64 bit host tools since it
ran out of ram linking clang
-Since OSL now needs clang to link successfully a findclang.cmake
has been provided for linux/OSX
Differential Revision: https://developer.blender.org/D10212
Reviewed By: brecht, sebbas, sybren
* WITH_CPU_SSE was renamed to WITH_CPU_SIMD, and now covers both SSE and Neon.
* For macOS sse2neon.h is included as part of the precompiled libraries.
* For Linux it is enabled if the sse2neon.h header file is detected. However
this library does not have official releases and is not shipped with any Linux
distribution, so manual installation and configuration is required to get this
working.
Ref D8237, T78710
Ref T84819
Build System
============
This is an API breaking new version, and the updated code only builds with
OpenColorIO 2.0 and later. Adding backwards compatibility was too complicated.
* Tinyxml was replaced with Expat, adding a new dependency.
* Yaml-cpp is now built as a dependency on Unix, as was already done on Windows.
* Removed currently unused LCMS code.
* Pystring remains built as part of OCIO itself, since it has no good build system.
* Linux and macOS check for the OpenColorIO verison, and disable it if too old.
Ref D10270
Processors and Transforms
=========================
CPU processors now need to be created to do CPU processing. These are cached
internally, but the cache lookup is not fast enough to execute per pixel or
texture sample, so for performance these are now also exposed in the C API.
The C API for transforms will no longer be needed afer all changes, so remove
it to simplify the API and fallback implementation.
Ref D10271
Display Transforms
==================
Needs a bit more manual work constructing the transform. LegacyViewingPipeline
could also have been used, but isn't really any simpler and since it's legacy
we better not rely on it.
We moved more logic into the opencolorio module, to simplify the API. There is
no need to wrap a dozen functions just to be able to do this in C rather than C++.
It's also tightly coupled to the GPU shader logic, and so should be in the same
module.
Ref D10271
GPU Display Shader
==================
To avoid baking exposure and gamma into the GLSL shader and requiring slow
recompiles when tweaking, we manually apply them in the shader. This leads
to some logic duplicaton between the CPU and GPU display processor, but it
seems unavoidable.
Caching was also changed. Previously this was done both on the imbuf and
opencolorio module levels. Now it's all done in the opencolorio module by
simply matching color space names. We no longer use cacheIDs from OpenColorIO
since computing them is expensive, and they are unlikely to match now that
more is baked into the shader code.
Shaders can now use multiple 2D textures, 3D textures and uniforms, rather
than a single 3D texture. So allocating and binding those adds some code.
Color space conversions for blending with overlays is now hardcoded in the
shader. This was using harcoded numbers anyway, if this every becomes a
general OpenColorIO transform it can be changed, but for now there is no
point to add code complexity.
Ref D10273
CIE XYZ
=======
We need standard CIE XYZ values for rendering effects like blackbody emission.
The relation to the scene linear role is based on OpenColorIO configuration.
In OpenColorIO 2.0 configs roles can no longer have the same name as color
spaces, which means our XYZ role and colorspace in the configuration give an
error.
Instead use the new standard aces_interchange role, which relates scene linear
to a known scene referred color space. Compatibility with the old XYZ role is
preserved, if the configuration file has no conflicting names.
Also includes a non-functional change to the configuraton file to use an
XYZ-to-ACES matrix instead of REC709-to-ACES, makes debugging a little easier
since the matrix is the same one we have in the code now and that is also
found easily in the ACES specs.
Ref D10274
* USD and OpenVDB headers use deprecated TBB headers, suppress all deprecation
warnings there since we have no control over them.
* For our own TBB includes, use the individual headers rather than the tbb.h that
includes everything to avoid warnings, rather than suppressing all.
This is in anticipation of the TBB 2020 upgrade in D10359. Ref D10361.
Also set default CYCLES_INSTALL_PATH to CMAKE_INSTALL_PREFIX.
By default with a `make cycles` this will build to ${CMAKE_BINARY_DIR}/bin
Differential Revision: https://developer.blender.org/D9961
Group all tests of a test suite into a single test command invocation.
This reduces the number of invocations by `ctest` by an order of
magnitude.
Since rB56aa5b0d8c6b663, `bin/tests/blender_test` was run for every
individual test. Having over a 1000 tests made testing slower than
necessary. Individual tests can still be run if desired by invocation of
`bin/tests/blender_test --gtest_filter=suitename.testname`.
NOTE: For this commit to have an immediate effect, it may be necessary
to remove the `tests` and `Testing` directories and some CMake files
from your build directory and rebuild. Run `ctest -N` to see the list of
tests; there should be less than 200.
Reviewed By: sergey, LazyDodo, sebbas
Maniphest Tasks: T83222
Differential Revision: https://developer.blender.org/D9649
This adds an option (WITH_COMPILER_CCACHE) to build using Ccache if it's
found. Makefiles-based, Ninja-based and Xcode generators are supported.
Pass `-DWITH_COMPILER_CCACHE=ON` to cmake to enable Ccache.
Utility option in GNUmakefile is also added: for e.g.,
`make ninja ccache`.
Reviewed By: brecht, ankitm
Differential Revision: https://developer.blender.org/D9665
Issues were:
* Abusing of `WITH_PYTHON_INSTALL_NUMPY` by both Audaspace and
Mantaflow.
- `PYTHON_INSTALL` options only decide whether we copy python (and
some extra modules) in our Blender installation. On linux it
makes much more sense to use global python installation.
- Now we have instead a proper `WITH_PYTHON_NUMPY`
* Bad assumptions regarding path of headers relative to path of python
module.
- In current Debian testing, modules are under `python3.9`
directory, while headers are under `python3` directory.
- Now we properly `find_path` for headers as well, modifying
`find_python_package` to take an optional argument for headers.
Note that the required changes done to `extern` libraries are in
blender-specific files that do not exist upstream.
Differential Revision: https://developer.blender.org/D9773
Issues were:
* Abusing of `WITH_PYTHON_INSTALL_NUMPY` by both Audaspace and
Mantaflow.
- `PYTHON_INSTALL` options only decide whether we copy python (and
some extra modules) in our Blender installation. On linux it
makes much more sense to use global python installation.
- Now we have instead a proper `WITH_PYTHON_NUMPY`
* Bad assumptions regarding path of headers relative to path of python
module.
- In current Debian testing, modules are under `python3.9`
directory, while headers are under `python3` directory.
- Now we properly `find_path` for headers as well, modifying
`find_python_package` to take an optional argument for headers.
Note that the required changes done to `extern` libraries are in
blender-specific files that do not exist upstream.
Differential Revision: https://developer.blender.org/D9773
This enables the use of clang-tidy in the VS IDE.
To use it:
1 - Enable WITH_CLANG_TIDY in your cmake configuration
2 - From the Analyse pull down menu select Run Code Analysis on...
The analyser is currently not enabled by default on build
given it is quite slow and there are quite a few problems
it reports that we still need to deal with.
This commit expands the Windows-specific code in rBdca9aa0053f7 and Linux-specific code in rB33b7d53df08a.
It also fixes a capitalization issue in FindPugiXML.cmake
PugiXML was historically shipped hidden embedded into OIIO, the Grease
Pencil team had a requirement for an XML library recently so pugi seems
like a natural choice since it's not really a 'new' library, we just
turn an implicit dependency into an explicit one.
This commit expands the Windows-specific code in rBdca9aa0053f7 to
include Linux. macOS support will be handled in a later commit.
NOTE: run `cmake -U'*PUGIXML*' .` in the build directory to ensure CMake
finds PugiXML in the new location.
For details see D8628
CYCLES_TEST_DEVICES is a list of devices (CPU, CUDA, OPTIX, OPENCL). It is set
to CPU only by default.
Test output is now writen to build/tests/cycles/<device>, and the HTML report
has separate report pages for the different devices, with option to compare
between CPU and GPU renders.
Various GPU tests are still failing due to CPU/GPU differences, these are to be
fixed or blacklisted still.
Ref T82193
This separates out PugiXML that was previously
bundled by OIIO.
As this linux/mac libs are not available
this commit only contains the builder and windows
changes, and the option to enable pugixml is
guarded by a platform if, this can be removed
once all platforms have committed the svn libs.
For details see D8628
Becomes rather annoying to duplicate them across C/C++ GCC/Clang sets,
almost as if the test should test both C and C++, and to do it for all
compilers.
Solves strict warning in the upstream of Ceres library.
Use a more reliable method to check the availability of the flag than
compiler versions. Some compilers have different behaviors for
C and C++.
Reviewed By: campbellbarton, ChrisLend
Differential Revision: https://developer.blender.org/D9446
The issue was in `buildinfo.c`:
char build_c[xx]flags[] = BUILD_C[XX]FLAGS;
Non-escaped double-quotes were terminating the string early, and
causing the compile error. So use single-quotes.
This change removes the user-specific information from
macros like `__FILE__` and keeps it relative to top level
source or build (for generated files) directory.
It makes traces concise.
Added option `WITH_COMPILER_SHORT_FILE_MACRO` enabled by default.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9386
Ankit Meel
Ray Molenkamp
Jörg Müller
Brecht Van Lommel
Campbell Barton
Brecht Van Lommel
Sergey Sharybin
Charles Flèche
Sybren A. Stüvel
Matt Hill
Bastien Montagne
Sebastián Barschkis
Patrick Mours
Nicholas Rishel