This adds support for pen tilt in sculpt mode. For now, pen tilt is used
by tweaking the tilt strength property, which controls how much the pen
angle affects the sculpt normal. This is available in Draw, Draw Sharp,
Flatten, Fill, Scrape and Clay Strips brushes, but it can be enabled in
more tools later.
The purpose of this patch is to have a usable implementation of pen tilt
in a painting mode, so users can test and see in which hardware and
platforms this feature is supported and how well it works. If it works
ok, more tools and features that rely on pen tilt can be implemented,
like brushes that blend between two deformations depending on the angle.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8893
The voxel remesher was using the voxel size to limit the shrink-wrap
projection distance. Now that distance is increased to help preserving
more detail on hard surface edges.
Reviewed By: pablodp606
Differential Revision: https://developer.blender.org/D6204
With all the work on DNA defaults for 2.91, it's nice to expose this
convenient operator. This was already hardcoded in the UI code to the
backspace key, adding it to the keymap instead will make the shortcut
automatically show in the button right click menu.
Differential Revision: https://developer.blender.org/D9219
This patch enables property search for all tabs in the property editor.
To make interaction faster, if the editor's current tab doesn't have a
result, the current tab changes to the next tab that has a match.
This patch implements basic code that only searches panels.
While we could run the existing "single tab" property search for every
tab, that would also do everything else related to the layout pass,
which would be less efficient, and maybe more complicated to maintain.
The search match status for every current tab of the property editor is
stored in a runtime bitfield and them displayed later by dimming icons
in the tab selector panel to the left. Using `BLI_bitmap` properly in
the runtime struct required moving it to `buttons_intern.h` and
adding a small API to access the search filter instead.
To make sure the editor isn't influenced by anything that happens while
building the layout for other tabs, most of the context is duplicated
and the new search is run in the duplicated editor.
Note that the tool settings tab works slightly different than the other
tabs, so I've disabled searching it for this commit. That would be a
relatively simple improvement, but would just require a bit of
refactoring of existing code.
Differential Revision: https://developer.blender.org/D8859
Change to monochrome version of the large alert icons and use 'Question' for the the Quit Confirm dialog box.
Differential Revision: https://developer.blender.org/D9062
Reviewed by Pablo Vazquez
The "Geometry start & End" panel was grayed when using an object
to create the curve bevel. It should only be grayed out in this case
when no object is chosen in the "Bevel" subpanel.
This patch adds missing icons for the new trim tools in sculpt mode.
Although these tools recently got "add geometry" modes, it's more
essential to highlight the most important feature of the tool,
trimming, than to try to portray everything they can do.
Differential Revision: https://developer.blender.org/D8963
This patch adds missing icons for the new sculpt face set tools, and
updates the mask icons to be more consistent with the changes.
Currently draw face sets and draw mask icons are inconsistent and don't
relate to drawing/painting masks or face sets. This commit makes the
icons consistent and reusable for future tools like sculpt vertex
colors.
Differential Revision: https://developer.blender.org/D8875
Both the default theme and Blender Light have been updated.
Blender Light also includes automatically generated colors based on the
default theme that were not set previously.
Python 3.7x added support for module `__getattr__` & `__dir__`.
Make use of this for operator access,
previously these were module like classes.
No functional changes, this is mostly to use a type which is expected,
rather than faking the type with a class instance.
After rBeb911610d05 there are some differences in how the layout code
decides whether to add decorators (aka animation buttons). Whether or
not that logic is correct, it's nice to specify that we don't want them
turned on in this popover.
Move position of Alerts and Progress bar back to the center of the Statusbar.
Differential Revision: https://developer.blender.org/D9118
Reviewed by Brecht Van Lommel
The overlay options in the image/uv editor is hidden in side panels and menus. Sometimes this panel is even hidden, while still useful.
The goal of this task is to introduce an overlay pop-over just like the overlay-popover of the 3d viewport.
Popover has
* UV Stretching (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Display As (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Show Modified (only available in the UV mode, when active object mode is a mesh and in OB_EDIT mode)
* Show UV Edges (including opacity slider; available UV, View, Paint, when active object mode is a mesh and in OB_EDIT mode)
* Udim tiles when no image is available.
Like the 3d viewport, there will be a editor toggle to enable/disable the overlays
For compatibility reasons the RNA properties are added to both the `SpaceImage.uv_editor` amd `SpaceImage.overlay`. On DNA level they are still stored in the SpaceImage. only new properties are added to the SpaceImageOverlay struct. During the next major release we could remove these options from `SpaceImage.uv_editor`. This should be noted in the Python section of release notes.
Reviewed By: Julian Eisel, Pablo Vazquez
Differential Revision: https://developer.blender.org/D8890
In the graph editor there is a panel that says "Active Keyframe" for
numerically editing a keyframe's values, but in the code there is no
concept of the "active keyframe." Since this is a useful concept to
have for some other features anyway, this commit adds an active
keyframe index value to FCurves. It also displays it with a theme
color for the active vertex (which didn't exist before) if the
FCurve is active.
The active keyframe in the graph editor is treated similarly to the
active vertex in the 3D view. It is the keyframe most recently selected
with a single click, and it is always selected.
For now, the only real functional change is that the active keyframe
appears in white and it should be more predictable which keyframe is
being edited in the sidebar panel.
Differential Revision: https://developer.blender.org/D7737
Follow the MLA style, agreed upon in T79589. This means "from" within UI
labels should be lowercase.
Differential Revision: https://developer.blender.org/D8345
The settings in these popups are not animateable, so also turn off
property decorate. And also use better widths in order to fit the
full text.
Differential Revision: https://developer.blender.org/D9060
Aligning the columns removes unecessary white space.
The same as in the D8480 / rBb2e0c8f902fa.
Differential Revision: https://developer.blender.org/D9111
Avoid overwriting user-chosen `SACTION_SLIDERS` flag when switching the
Dope Sheet editor to Shape Key mode. The Shape Key mode now ignores the
flag, and always shows the sliders.
The obvious limitation is that you can't hide the sliders in the Shape
Key editor anymore
Reviewed By: looch, sybren
Differential Revision: https://developer.blender.org/D9121
If this doesnt work in a particular mode, it would be better to indicate
that in the Overlay popup.
Differential Revision: https://developer.blender.org/D8981
For other areas in Blender that have a toggle and related settings,
we put a popover with the settings right next to the toggle. This
combination is nice because it organizes the settings without making
interaction slower. It also makes the settings more discoverable since
they're right next to the toggle.
Differential Revision: https://developer.blender.org/D8537
This enables a union boolean mode for the trimming gestures tools which
adds geometry to the mesh instead of cutting it.
It also adds a Join mode, which adds the geometry directly without
using a boolean operation.
Depending if you plan to use dyntopo or not, it is useful to have both
options available.
This is using the full depth of the object from the camera view for the
depth of the geometry, but options for controlling the trimming depth in
all modes are going to be added in later patches
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9066
- Density, interpolation and slicing options in Volume Object's
Viewport Display are now not aligned to each other as they are not
closely related.
- Changed the enum property for slicing ('Method') to a boolean
property 'Slice' and added a sub-panel for slicing options under
the 'Viewport Display' panel in Volume Object and Fluid for better
clarity.
- Renamed `axis_slice_method` to `use_slice` in the python API for
Volume Object and Fluid.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9097
Multiple related issues:
* `view_zoomdrag_exec()` required `view_zoomdrag_init()` to be called first to
set up data. Can now easily be done in the `_exec()` function as well though.
* Because of that the operators could not be called in an `EXEC_` context (e.g.
`EXEC_REGION_WIN`).
* With "Zoom to Mouse Position" enabled, zooming from a menu or script would
zoom to the mouse position. That should only happen if the operators are
called directly in the editor.
The license was renamed GPL-license.txt => license/GPL-2.0txt in 0434efa09d.
Although the renaming made all the license files consistent, we are better off
not updating the copyright file in Blender. Instead we can live with some mild
inconsistency in the license names.
This simulation area mode moves the active area with the brush. When
enabled, the cloth brush has no restrictions on stroke length, area or
mesh vertex count.
In order to work, this enables PBVH nodes dynamically for simulation as
the stroke location moves and builds the constraints for new nodes
during the stroke. When a node is not inside the simulated area, all the
constraints that were created for it and vertex collisions are not
computed. The simulation limits falloff areas and constraints tweaking
control how the simulated and no simulated nodes blend.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D8726
The adds a new option to simplify volumes in the viewport.
The setting can be found in the Simplify panel in the render properties.
Volume objects use OpenVDB grids, which are sparse. For rendering,
we have to convert sparse grids to dense grids (for now). Those require
significantly more memory. Therefore, it's often a good idea to reduce
the resolution of volumes in the viewport.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9040
Ref T73201.
This tool projects all vertices to the right of the plane defined by the
line gesture towards the plane. By doing this, this tool can create cuts
and plane surfaces in the mesh without modifying the geometry or using
boolean operations, so it is much faster than bisecting the mesh for
cases where the geometry was going to be remeshed afterwards.
Added as experimental as it does not have icon.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D9021
This adds support for line gesture to SculptGestureContext and
implements a Mask Line tool, which affects everything to the right of a plane
defined by the straightline gesture.
For this to work, a new WM_gesture_straightline_oneshot_modal is needed
which only runs exec when the gesture is over.
Added as experimental as it does not have icon.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8722
The operator has some problems with Undo, so better put it in
experimental for now.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9007
For the final builds instead of leaving all the license files in the main
folder, we move them to a "license" folder.
Also, adding more licenses here (MIT, Apache, ...).
Differential Revision: https://developer.blender.org/D8999
This fixes and reverts commit c7287ffaec
Due to hardcodded keys, the modifier for auto contrain plane did not
work with custom keymaps and was in conflict with other keyitems.
Its usability is also confusing since it cannot be used without
`MOD_PRECISION`
But instead of removing it, it is better to make this modifier compatible
with custom keymaps and keep the conflict.
Caused by still having 'texture_opacity' in the preests and the preset
operator (but this was removed in the 2.83 rewrite).
Maniphest Tasks: T81081
Differential Revision: https://developer.blender.org/D8990
Script create_msix_package.py will download the ZIP file
from the given URL. It will create the MSIX package
with the version number and publisher ID given.
Strongly recommended are the path to a valid PFX file, and the
password to use that PFX file. These are needed for signing
the resulting MSIX package. The signing step is optional though,
but the resulting MSIX package cannot be installed outside of the
Microsoft Store
Example
set VERSION=2.83.2.0
set URL=https://download.blender.org/release/Blender2.83/blender-2.83.2-windows64.zip
set PUBID=CN=PUBIDHERE
set PFX=X:\path\to\cert.pfx
set PFXPW=pwhere
python create_msix_package.py --version %VERSION% --url %URL% --publisher %PUBID% --pfx %PFX% --password %PFXPW%
Requirements:
* Python default from the Microsoft Store should do (3.8)
* requests can be installed with `pip install requests`
Note that for an LTS release that gets uploaded to its own LTS application release
in the store you need to specify the `--lts` switch on the command-line to the script.
Upon completion there will be a file with the
name blender-2.83.2.0-windows64.msix. In case PFX file and its password were
given on the command line MSIX package will also be signed for the Microsoft Store.
Related Wiki page: https://wiki.blender.org/wiki/Process/Release_On_Windows_Store
Reviewed By: jbakker
Maniphest Tasks: T77348, T79356
Differential Revision: https://developer.blender.org/D8310
In the end the process is surpringly simple, we only need to manually
convert the proxy itself into an override (which is trivial), and then
run common code with the default 'make override' operation.
Fix T81059: Add operator to convert proxies to library overrides.
Mainly a UI adjustment, no functional changes
To have the default mode in the advanced panel as separated option is not the best solution.
Now, there is a pin option and when it is enabled, the brush keeps this mode.
Differential Revision: https://developer.blender.org/D8974
With the new image editor drawing there were was some mutual exclusive
functionality. When rendering the alpha was shown correctly or the pure
emissive colors were shown correctly, but never both. The cause of this
is that the image_gpu did not used the correct alpha mode when generating
gpu textures for non-images (render results, compositors viewer)
The implementation always checked the alpha_mode. Alpha mode is an
attribute for images, but aren't set for non images. This patch adds
a more detailed check to ensure that the gpu texture is premultiplied.
The issue has been tested using several bug report files and production
files.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D8978
The placement of the start and end factor and mapping settings for
curves has been quite misleading for a long time. They were in the
"Bevel" subpanel, but they aren't related to bevel because they affect
curves with only extrusion and no bevel.
This commit moves these properties to their own subpanel, labeled
"Start & End Mapping".
Differential Revision: https://developer.blender.org/D8910
This patch adds a new operator to convert a black and white image into
grease pencil strokes.
If the image is not B/W, an internal conversion is done.
This is the first operator using Potrace, but we expect to add more features in next Blender versions.
Reviewed By: HooglyBoogly
Maniphest Tasks: T79877
Differential Revision: https://developer.blender.org/D8951
The bevel type is a more useful check for graying out this property
because its effects will be apparent before choosing an object. Before,
the fill type property would only gray out with a bevel object selected.
Light rotation is supported both in world and view light orientation in
lookdev, so no reason to disable it.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D8958
This is not an exhaustive change, just for the 2D cursor and
UDIM grid properties. Also vertically align the "UV Vertex"
buttons like in the 3D view panels.
This adds XYZ symmetry as a property of meshes and updates all modes to
use the mesh symmetry by default to have a consistent tool behavior
between all modes and when switching objects.
Reviewed By: brecht, mano-wii, campbellbarton
Maniphest Tasks: T79785
Differential Revision: https://developer.blender.org/D8587
This object operator exits and frees the edit data of the
current object and enters the same mode in another one in a single step,
without going through object mode or keeping multiple edit object data
active. It is assigned to the D key.
This solves all conflicts that the right/click select keymap and the
emulate 3 button mouse produces for this operation and it is independent
of the state of Lock object modes.
Also, as the SculptSession is freed, when using Multires objects go
back to their preview resolution level, so it is possible to work on
high vertex count scenes without slowing down the viewport and other
performance problems.
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D7510
This implements a new overlay that blends the bakground color over the
objects that are not in the same mode as the active object, making
them fade with the background.
This is especially needed for sculpt mode as there is no other overlay
or indication in the viewport to display which object is active.
This is intended to be used with D7510 in order to have a faster
workflow when sculpting models with multiple objects.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8679
This adds an option for the HDRI rotation to follow the view rotation.
When this option is enabled, this allows EEVEE materials to be used as
matcaps for sculpting and painting.
This has an extra performance cost when orbiting around the model as the
lookdev cache needs to be recalculated, but in my test it is barely
noticeable.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D8566
This new feature allows to use the strokes as an eraser of any stroke below. This is very handy to open holes in filled areas.
After running some tests, we have decided to keep the additive effect of the holdout color. To get clean holdout areas, just move the color to black to remove any additive effect. To have additive effect can be used in situations like tint slightly a transparent window with blue to simulate the glass.
See T79878 for more details
Differential Revision: https://developer.blender.org/D8932
Was missing a dedicated entry for LMB select, this is to be consistent
with how it is done for meshes.
Maniphest Tasks: T80905
Differential Revision: https://developer.blender.org/D8935
This adds support for the same custom bevel profile widget used in
the bevel tool and modifier to the geometry generation for curves.
This is expecially useful for text and 2D curves with extrusion, as
it works much better than a weld & bevel modifier combination.
It can also be useful for adding quick detail to pipe-like objects.
The curve holds the CurveProfile struct and a new "Bevel Mode"
property decides which type of bevel to build, round, object, or
custom profile.
Although curves can already use another curve to make the bevel
geometry, this is a quicker way, and it also defines the profile of
just one corner of the bevel, so it isn't redundant. It's also nice
to have the same custom profile functionality wherever there is bevel.
Differential Revision: https://developer.blender.org/D8402
There is no ideal solution here, but we can assume by default that we should
use the Alpha output from a texture used for transparency data.
This will break people using a dedicated B&W texture for this alpha
pass, but we cannot really handle all cases properly in this wrapper, we
only try to support the most common ones to some extent.
Adds an optional slider to the action constraint so that it can be
driven without a constraint target.
This is very helpful for more complex rigging and mechanical rigs, as it
means the action constraint can be controlled with a driver/custom
property directly, currently if we want to use a driver to control it we
must add a "dummy" bone/object inbetween to act as a control.
Reviewed By: Sebastian Parborg, Sybren A. Stüvel, Demeter Dzadik, Julian Eisel
Differential Revision: http://developer.blender.org/D8022
This commit makes grid theming more consistent and capable by adding
some new theme colors related to grid rendering.
- Add grid theme color for node editor. `UI_view2d_multi_grid_draw`
is called with TH_GRID instead of a shaded `TH_BACK`.
Also color-blend `TH_NODE_GROUP`.
- Make the movie clip editor's clip preview grid respect grid theme
color (`ED_region_grid_draw` uses color-blended `TH_GRID`).
- Add versioning code to allow fixing existing themes (the resulting
themes should visually look the same as before)
These changes did cause some inconsistencies in the movie clip editor,
even after adjusting the themes accordingly:
1. The alpha slider of the grid color affects the background and not
the grid lines themselves.
2. The grids used by graph and dopesheet mode could already be themed
in the past. Now that the clip preview's grid can also be themed,
two different modes share the same theme color.
Differential Revision: https://developer.blender.org/D8699
This adds color tagging to collections. There are 8 color
options which are themable in the user preferences, with an additional
option for no color tag by default.
This adds a new filled collection icon and 8 colored variants of the
icon that can be themed in the user preferences.
In this commit the only interface to setting the color tags is through
Python, and there is nowhere in the interface where the collections are
shown colored. Setting and viewing the color tags from the outliner will
follow.
Manifest Task: https://developer.blender.org/T77777
Differential Revision: https://developer.blender.org/D8622
All the changes made in the branch `soc-2020-fluid-tools` are included in this patch.
**Major changes:**
=== Viewport Display ===
- //Raw voxel display// or //closest (nearest-neighbor)// interpolation for displaying the underlying voxel data of the simulation grids more clearly.
- An option to display //gridlines// when the slicing method is //single//.
==== Grid Display ====
- Visualization for flags, pressure and level-set representation grids with a fixed color coding based on Manta GUI.
==== Vector Display ====
- //**M**arker **A**nd **C**ell// grid visualization options for vector grids like velocity or external forces.
- Made vector display options available for external forces.
==== Coloring options for //gridlines// ====
- Range highlighting and cell filtering options for displaying the simulation grid data more precisely.
- Color gridlines with flags.
- Also, made slicing and interpolation options available for Volume Object.
Reviewed By: JacquesLucke, sebbas
Differential Revision: https://developer.blender.org/D8705
`ctrl-F` to start the search is obviously necessary, but the clear
operator, `alt-F` requires some of explanation. First, it maps nicely
to the paradigm of "key to set, alt-key to clear," which makes it
unobtrusive. Second, it can be a quicker way to clear the search than
moving the mouse to the top. Finally, in the future, it could a reset
the panels to their expansion before the search started.
Differential Revision: https://developer.blender.org/D8857
This adds a search bar to the properties editor. The full search for
every tab isn't included in this patch, but the interaction with
panels, searching behavior, UI, region level, and DNA changes are
included here.
The block-level search works by iterating over the block's button
groups and checking whether they match the search. If they do, they
are tagged with a flag, and the block's panel is tagged too. For
every update (text edit), the panel's expansion is set to whether
the panel has a result or not. The search also checks for matching
strings inside enums and in panel labels.
One complication to this that isn't immediately apparent is that
closed panel's subpanels have to be searched too. This adds some
complexity to the area-level panel layout code.
Possible Future Improvements:
- Use the new fuzzy search in BLI
- Reset panels to their expansion before the search started if
the user escape out of the text box.
- Open all child panels of a panel with expansion.
Differential Revision: https://developer.blender.org/D8856
We will use a highlight on panel headers to convey that they have
a search match, so this commit initializes the theme color for the
properties editor.
Differential Revision: https://developer.blender.org/D8854
The context path "breadcrumbs" used to be in a panel in 2.79.
Although they look a bit better in the header, there isn't enough
space for them with the property search field in the header as well.
Maybe there will be another solution in the long term to fit both
the search field and this panel in the header, but for now, this
commit moves these labels back to a header-less panel.
Differential Revision: https://developer.blender.org/D8853
There are some areas that don't handle pure emissive colors well. For
example erasing alpha using 2d or 3d painting. Or blurring an image in
the compositor.
This patch makes the rendering of pure emissive colors optional. In the
side panel of the Image editor it can still be enabled when needed.
There currently isn't a better place to store it as it is related on how
the image (or a layer of the image) is created. A future design needs to
make sure that the full workflow is supported.
This commit adds a label on top of the bake operator in modular bake mode. This way users will immediately see if their current settings will allow them to bake noise, meshes or particles after baking the simulation base.
Running `bpy.ops.script.reload()` from Python was crashing
since the operator being called was it's self freed.
Change the reload operator to defer execution - as supporting
re-registration during execution is quite involved for a corner-case.
Bone.children_recursive would return edit-bones when in edit-mode
irrespective of the type of the bone.
Check the type of self instead of the existence of edit-bones.
The old image editor has an option to enable the smooth wire drawing.
This option was stored per editor and disabled by default. This patch
connects the smooth wires in the UV/Image editor to `User Prefereces ->
Viewport -> Quality -> Smooth Wire [] Overlay`.
The old option is left in place and will be removed when the old image
editor drawing code will be removed before BCon 3.
This patch reverses use draw manager for image editor the
experimental feature. Now the new drawing is enabled by default.
Inside the experimental tab in the user preferences there is now an
option to revert back to the old drawing method.
Using this option we can easilly check if all drawing features have been
migrated over. The plan is to remove the legacy drawing before BCon 3.
This project moves the current UV/Image editor drawing to the draw manager.
Why would we do this:
**Performance**:
Current implementation would draw each texel per time. Multiple texels could be
drawn per pixel what would overwrite the previous result. You can notice this
when working with large textures. Repeat image drawing made this visible by
drawing for a small period of time and stop drawing the rest. Now the rendering
is fast and all repeated images are drawn.
**Alpha drawing**:
Current implementation would draw directly in display space. Giving incorrect
results when displaying alpha transparent images.
This addresses {T52680}, {T74709}, {T79518}
The image editor now can show emission only colors. See {D8234} for
examples.
**Current Limitations**
Using images that are larger than supported by your GPU are resized (eg larger
than 16000x16000 are resized to 8k). This leaves some blurring artifacts. It is
a low priority to add support back of displaying individual pixels of huge
images. There is a design task {T80113} with more detail.
**Implementation overview**
Introduced an Image Engine in the draw module. this engine is responsible for
drawing the texture in the main area of the UV/Image editor. The overlay engine
has a edit_uv overlay which is responsible to draw the UV's, shadows and
overlays specifically for the UV Image editor. The background + checker pattern
is drawn by the overlay_background.
The patch will allow us to share overlays between the 3d viewport and UV/Image
editor more easily. In most cases we just need to switch the `pos` with the `u`
attribute in the vertex shader.
The project can be activated in the user preferences as experimental features.
In a later commit this will be reversed.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8234
This should improve the issue with Scrape accumulation in concave
surfaces. When the strength of the brush is higher, the area radius is
also bigger, so the scrape plane is more stable preventing it from
accumulating displacement in the same area.
The Scrape/Fill default presets are also updated to include this
functionality.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8821
The outliner context menu has options to enter and exit edit mode, but
they only show in edit mode, and they don't work. This removes the
broken entries and related code.
Part of T77408
Differential Revision: https://developer.blender.org/D8641
Add a column of icons in the left gutter of the outliner for controlling
the interaction modes of objects. When an object is in a mode other than
object mode, the mode icon will draw to the left of that object. Any
other objects that are valid to be added or swapped into the mode are
drawn with a dot to the left of the object.
Clicking the dot to the left of an object will swap that object with the
current active object in the interaction mode. For edit and pose modes,
ctrl clicking the dot will add that object to the current mode.
Clicking the mode icon next to the active object removes it and all
other objects from the current mode.
The behavior is nearly identical to the previous edit/pose mode toggling
by selecting the mesh and armature datablocks, with additional support
for all interaction modes.
Currently two undo steps are pushed to prevent an assert.
Part of T77408
Manifest Task: https://developer.blender.org/T68498
Differential Revision: https://developer.blender.org/D8641
Modular caches for noise, particles and meshes require that additional data is baked (i.e. is resumable option). With this commit users will be explicitly asked to enable this option before being able to bake noise, particles or meshes.
This commit also changes the U shortcut to open the unwrap menu instead
of the Unwrap operator. The unwrap operator can now be accessed by
pressing U twice.
Note, these operators use the 3D Viewports selection and not the UV
Editor selection. In the future the operators should unwrap based on the
selection within that editor.
Fixes T80600
Differential Revision: https://developer.blender.org/D8834
There is a list of attributes, along with operators to add and remove
attributes. For adding, there are a few standard attributes that can be
added quickly, as well as a popup to create a custom attribute.
Ref T76659
Differential Revision: https://developer.blender.org/D8636
This reverts commit f14d24729f.
I commited the previous commit because I wasn't building with openvdb.
Compiling with openvdb fix the clang-tidy errror.
This removes from the UI all tools with missing icons and hides them
under a "Tools with missing icons" experimental option.
We agree on not making available by default tools in master without icons.
Having this experimental flag will allow to commit new tools as soon as the
technical design and implementation is finished so development can
continue, without adding broken icons to the UI.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D8831
* Match menu items with Add Menu (order and naming e.g. Font -> Text)
* Use Icons
* Remove ellipsis from the name (policy is to use `...` only when triggering a window/popup)
No functional changes.
Thanks @HooglyBoogly for the help!
Based on the original patch by Vaishnav S (@padthai), this adds
support for temperature units. Initially supported units are Celsius,
Kelvin, and Fahrenheit.
The units aren't used anywhere with this commit. Those changes should
happen in separate patches by adding PROP_TEMPERATURE to RNA property
definitions. But it should be ensured that the various solvers and
simulations actually properly use real units.
The complexity of some of the changes comes from the fact that these
units have offsets from each other as well as coefficients. This also
makes the implementation in the current unit system troublesome.
For example, entering 0C evaluates correctly to 273K, but 0C + 0C
doubles that result, because each unit value is evaluated separately.
This is quite hard to solve in the general case with Blender's current
unit system, though, so it is not handled in this commit.
Differential Revision: https://developer.blender.org/D4401
The current playback popover has some issues:
- Using labels instead of headers is inconsistent with
the rest of the interface
- Incomplete context and description for some properties
- Ugly large spacing
This commit fixes these problems by using headers.
Differential Revision: https://developer.blender.org/D8434
This implements Box Trim as a boolean based trimming too gesture in sculpt
mode. This is the intended way to remove parts of the sculpt instead of
using box mask and mask slice. It also creates new face sets for the new
faces created after the boolean operation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8766
Sometimes interpolate all frames is not convenient and it's better, for example, interpolate in twos.
The new parameter allows to define the number of frame for each step, by default is set to 1 as before.
{F8812621}
This is a request of animators to improve interpolate tools.
Reviewed By: mendio
Maniphest Tasks: T80190
Differential Revision: https://developer.blender.org/D8723
239b0b
This implements a Face Set Extract operator, which is similar to mask
extract. This operator uses a picker to select and Face Set in the mesh
and extract the geometry directly to a new object.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8599
We have established a convention of exposing the most important
settings from popovers, then aligning a popover to control more
detailed settings.
The file browser has powerful display / filtering settings, but
they're hidden in popovers at the moment, so it's sometimes a pain
to use them. The "display as" options are now exposed to the left of
the display settings popover, and the "filter" toggle is exposed to
the left of the filter settings popover. This convention is familiar
and intuitive for users and makes interaction faster.
Note that the "show hidden" item in the filter popover still has an
effect if filtering is disabled.
This commit also:
- Removes the icons in the "Sort By" enum
- Uses property split for the "Sort By" enum
- Very slightly increases the default width of the file browser
window to make room for the new buttons.
Differential Revision: https://developer.blender.org/D8719
This implements the sculpt gesture lasso and box operators for face
sets. They work the same way as the mask gesture operator and tools.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8716
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
Continuing the work from D8326, this commit adds a property split
layout to the add torus operator. It also puts the properties common
to all object add operators at the bottom for consistency.
Differential Revision: https://developer.blender.org/D8748
The animated objects was not updated for each internal substep for the rigidbody sim.
This would lead to unstable simulations or very annoying clipping artifacts.
Updated the code to use explicit substeps and tie it to the scene frame rate.
Fix T47402: Properly updating the animated objects fixes the reported issue.
Reviewed By: Brecht, Jacques
Differential Revision: http://developer.blender.org/D8762
Keymaps must be customized by the user.
But this is not the case for hardcoded keymaps.
Also the repetition of hardcoded and user-defined keyitems may induce
the user to think they have made a mistake or it is a bug.
Differential Revision: https://developer.blender.org/D6454
Useful to perform cleanup operations on many objects at once,
also these operations weren't accessible from the search menu.
This follows the convention for other clean up menus
when editing mesh, curve & grease-pencil.
Resolves issues raised in T80011
The CPP Shader class does not initialize the interface attribute.
What will crash when deleting the shader.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8740
The outliner already uses the alternating row theme color as an
overlay for every other row. This uses the same color for the file
browser, instead of a hardcoded shading.
The file browser background color is slightly tweaked to match the
outliner, and the Blender Light theme is updated to use a lighter
background color like the outliner.
Reviewed by: Hans Goudey, Julian Eisel
Differential Revision: https://developer.blender.org/D8717
`TH_UV_OTHERS` is a theme option that isn't hooked to anything since
blender 2.80. This patch will remove the option and related code.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D8669
Remove `exec()` and `eval()` calls from `WM_OT_properties_edit` where
possible. This not only results in simpler, cleaner code, but also
removes the necessity for `repr(value)` to evaluate to a Python
expression that in turn evaluates to `value` again.
No functional changes.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D8658
This adds the orientation modes to the Cloth Filter.
Similar to the mesh filter, they set the orientation of the axis when
limiting the forces.
When using the gravity mesh filter, the orientation also sets the gravity
direction. In world orientation, cloth will always fall towards the
ground plane. In view mode, cloth will always fall down relative to the
view.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8618
Popovers which are aligned with properties should turn themself
(and the panel they open) inactive when the corresponding property
toggle is turned off. A notable exception is the snap settings
popover, as snapping can still be used when the toggle is off.
Differential Revision: https://developer.blender.org/D8584
Now by default the selection mode is All keyframes types.
Also removed the icon for All option and renamed from `All Types`to `All`.
UI review by @pablovazquez
This adds a new brush property called "Deformation Target" which
controls how the brush deformations is going to affect the mesh data. By
default is set to Geometry, which makes the brushes displace the
vertices. When set to Cloth Simulation, the deformation of the brush is
applied to the cloth solver constraints, so the simulation is
responsible to apply the final deformation. This allows to add cloth
simulation effects to other sculpt tools with minor modifications to their
code.
This patch enables Cloth Simulation deformation target for Pose and
Boundary brushes, which are tools that are already designed to work in
low poly counts and produce large deformations. This allows creating the
most common cloth effects, like bending and compressing folds, without
relying on collisions.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8578
Previously, the XYZ deform axis of the Mesh Filter were limited to
object space (which is the default for sculpt mode). Now it is possible
to limit the XYZ displacement in Local, Global or View space.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8582
Final releases (including beta) should strictly show features that are
finalized to prevent loss of data, old API clanging around, and the
overall quality of the product (Blender) presented.
Note that rendering should never be affected by user preferences, so
this is only changing things in the UI level.
Development note: This is reset experimental UI on file load.
Also note: to hide RNA (needed for hair and particles) will be done as a
separate patch.
Differential Revision: https://developer.blender.org/D8606
This uses the same concept of the Mesh Filter but for applying the cloth
filter forces, so now it can be limited to a specific axis.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8567
One should be able to edit overridable IDProps values, but never their
settings/definitions.
Note that being able to add new IDProps to overrides is still a TODO.
Reported by Josephbburg (@Josephbburg) over blenderchat, thanks.
This code was left here after the refactor, it was doing nothing and it
was causing an assert.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8579
This uses a single row for the three axis instead of a row per axis.
Reviewed By: sergey, Severin
Differential Revision: https://developer.blender.org/D8581
Currently, the search operator in the node add menu NODE_MT_add is drawn
even if no node categories exists. This patch only draws the operator if
at least one node category passes the poll.
This patch is needed because some add-ons use custom search operator and
do not register node categories. In this case, it is undesirable to have
a search operator drawn that do nothing and is not used. One such add-on
is Animation Nodes.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D8576
In EEVEE the AO renderpass influenced other render passes. Until now the
pass wasn't selectable when AO was disabled in the scene to remove these
render artifacts.
This patch allows rendering EEVEE AO pass without enabling it in the
scene. It does this by binding a fallback texture that is used by the
surface shaders.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7956
Many of these popovers could use a design pass in 2.91, but for 2.90 we
don't want to change any UI strings at this point, so the best way to
solve the cutoff text is to widen the popovers. Sadly this won't affect
popovers when other languages besides English have longer strings, but
solving that is a much larger task.
Another benefit is that tweaking sculpt / paint brush options feels much
less cramped with slightly wider popovers.
I only know of one string that is still slightly cutoff by default with
this patch, the "Max Element Distance" property of the pose brush in the
sculpt mode brush settings popover. But I didn't think it was worth
widening that popover more to deal with that one case.
Differential Revision: https://developer.blender.org/D8575
Since DATA_PT_sculpt_vertex_colors has its own poll() we need to call
the poll() of MeshButtonsPanel as well
Differential Revision: https://developer.blender.org/D8563
Many of the icons had lots of interior geometry left over from
subdivision. In these cases we should remove the interior geometry
and leave the object with the modifier for the future.
This icon mimics the details of the cloth brush icon while using the
frame style extablished for the other "filter" tools.
Differential Revision: https://developer.blender.org/D8467
This icon mimics the details of the cloth brush icon while using the
frame style extablished for the other "filter" tools.
Differential Revision: https://developer.blender.org/D8467
In this mode the preview image is always using the most of the preview
area space: it is scaled to fit, preserving aspect ratio. This makes it
possible to always have maximum of the preview region even after resize
of other areas.
This mode is enabled by default, is available in the View -> Zoom to Fit
menu. It is enabled when View All (Home key) is used, and is disabled
when manual navigation ([panning, zooming) is performed.
There is no versioning code, which means existing files will open as-is,
but new projects will have this option enabled.
Ref T78987
Maniphest Tasks: T78987
Differential Revision: https://developer.blender.org/D8549
This adds the boundary_falloff_type and boundary_offset to control how the
falloff of the Boundary Brush is applied.
Boundary Origin Offset is the same concept as the Pose Origin offset in
the Pose Brush. It is a multiplier that adds extra length to the brush
radius to locate the deformation pivot further from the boundary without
affecting the falloff.
The Falloff type includes Constant (previous default), brush radius, loop
and loop and invert. Loop and Loop and Invert can be used to create
deformation patterns in a mesh.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8526
If the File Browser was used in regular editor mode (e.g. not through an
operation like File > Open), the operator that usually opens files and
directories wouldn't execute. We need to keep two operators for
double-click in the keymap so selecting and opening works in all cases.
Caused by c606044157.
Previously the way to use this operations was using the shortcut Ctrl +
W and Ctrl + Alt + W, which was not very discoverable and it was
limiting the amount of options that can be added to the operator.Now the
same functionality of the operator is available as a tool, which will
make easier to add other editing operations and options without adding
more entries to the keymap.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8545
Now the operators are split to define different default values. This is also required for the future Bezier primitive tools.
This allows to show in the Topbar the number of subdivisions. Before this value was totally hidden and it was number of Edges. The wheelmouse can be used to override the value while running, but does not change the default value.
{F8766270}
All operators share same code.
Also, fixed some bad practices done with Toolbar in python.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D8506
This adds a property that checks the normals of each vertex against the
view direction to decide if they should be masked (similar to the
"Front Faces Only" option works for brushes.
Reviewed By: sergey
Maniphest Tasks: T77637
Differential Revision: https://developer.blender.org/D8448
This brush includes a set of deformation modes designed to deform and
control the shape of the mesh boundaries, which are really hard to do
with regular sculpt brushes (and even in edit mode). This is useful
for creating cloth assets and hard surface base meshes.
The brush detects the mesh boundary closest to the active vertex and
propagates the deformation using the brush falloff into the mesh.
It includes bend, expand, inflate, grab and twist deform modes.
The main use cases of this brush are the Bend and Expand deformation
modes, which depend on a grid topology to create the best results.
In order to do further adjustments and tweaks to the result of these
deformation modes, the brush also includes the Inflate, Grab and
Twist deformation modes, which do not depend that much on the topology.
Grab and Inflate are the same operation that is implemented in the
Grab and Inflate tools, they are also available in the boundary brush
as producing deformations with regular brushes in these areas is very
hard to control.
Even if this brush can produce deformations in triangle meshes and
meshes with a non-regular quad grid, the more regular and clean the
topology is, the better. Most of the assets this brush is intended to
deform are always created from a cylindrical or plane quad grid, so it
should be fine. Also, its algorithms can be improved in future versions
to handle more corner cases and topology patterns.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8356
Pablo Dobarro
Leha
Hans Goudey
Aaron Carlisle
Clément Foucault
Yevgeny Makarov
Rahul Chaudhary
Pablo Vazquez
Campbell Barton
Harley Acheson
Jeroen Bakker
Christoph Lendenfeld
Philipp Oeser
Pablo Dobarro
Bastien Montagne
Sriharsha Kotcharlakot
Julian Eisel
Dalai Felinto
Jacques Lucke
Ivan Perevala
Valentin
Antonio Vazquez
Germano Cavalcante
Nathan Letwory
Alex Strand
Chris Clyne
Red Mser
Nathan Craddock
Jeroen Bakker
Sebastián Barschkis
Brecht Van Lommel
Sebastian Parborg
Joerg Mueller
Germano Cavalcante
Sybren A. Stüvel
OmarSquircleArt
Sergey Sharybin