21 icons slightly reworked to be a bit smaller. Icons like "solo", some
arrows including "file_refesh", etc are just a little large within the
bounds that they are displayed in. This gives them a bit more breathing
room.
Pull Request: https://projects.blender.org/blender/blender/pulls/119425
Add an icon called INTERNET that looks like our current URL without the
mouse cursor, so it looks less specifically like a web document. So can
be used to represent other internet and cloud-based services.
Pull Request: https://projects.blender.org/blender/blender/pulls/119186
Additional icons for face corner, pointcloud points needed for general
usage. Unselected camera, view locked, and view unlocked for #111076.
Changes to mod_mask for #117467. pointcloud_data changed only for
alignment change. Running Update Icons also changed mod_explode.
Pull Request: https://projects.blender.org/blender/blender/pulls/117732
Mostly just the result of running `blender_icons_update.py` without adding or changing any icon source files. Removal of three unused icons and adding three others to the project to resolve conflicts between them.
Pull Request: https://projects.blender.org/blender/blender/pulls/114874
This commit adds a new face nearest snapping mode, adds new snapping
options, and (lightly) refactors code around snapping.
The new face nearest snapping mode will snap transformed geometry to the
nearest surface in world space. In contrast, the original face snapping
mode uses projection (raycasting) to snap source to target geometry.
Face snapping therefore only works with what is visible, while nearest
face snapping can snap geometry to occluded parts of the scene. This new
mode is critical for retopology work, where some of the target mesh
might be occluded (ex: sliding an edge loop that wraps around the
backside of target mesh).
The nearest face snapping mode has two options: "Snap to Same Target"
and "Face Nearest Steps". When the Snap to Same Object option is
enabled, the selected source geometry will stay near the target that it
is nearest before editing started, which prevents the source geometry
from snapping to other targets. The Face Nearest Steps divides the
overall transformation for each vertex into n smaller transformations,
then applies those n transformations with surface snapping interlacing
each step. This steps option handles transformations that cross U-shaped
targets better.
The new snapping options allow the artist to better control which target
objects (objects to which the edited geometry is snapped) are considered
when snapping. In particular, the only option for filtering target
objects was a "Project onto Self", which allowed the currently edited
mesh to be considered as a target. Now, the artist can choose any
combination of the following to be considered as a target: the active
object, any edited object that isn't active (see note below), any non-
edited object. Additionally, the artist has another snapping option to
exclude objects that are not selectable as potential targets.
The Snapping Options dropdown has been lightly reorganized to allow for
the additional options.
Included in this patch:
- Snap target selection is more controllable for artist with additional
snapping options.
- Renamed a few of the snap-related functions to better reflect what
they actually do now. For example, `applySnapping` implies that this
handles the snapping, while `applyProject` implies something entirely
different is done there. However, better names would be
`applySnappingAsGroup` and `applySnappingIndividual`, respectively,
where `applySnappingIndividual` previously only does Face snapping.
- Added an initial coordinate parameter to snapping functions so that
the nearest target before transforming can be determined(for "Snap to
Same Object"), and so the transformation can be broken into smaller
steps (for "Face Nearest Steps").
- Separated the BVH Tree getter code from mesh/edit mesh to its own
function to reduce code duplication.
- Added icon for nearest face snapping.
- The original "Project onto Self" was actually not correct! This option
should be called "Project onto Active" instead, but that only matters
when editing multiple meshes at the same time. This patch makes this
change in the UI.
Reviewed By: Campbell Barton, Germano Cavalcante
Differential Revision: https://developer.blender.org/D14591
Geometry Nodes (new) icon. So far we were using the generic node-tree
icon for geometry nodes, not anymore.
The new icon is composed of 4 spheres that is a reference to the
original pebbles demo. Scattering points was also the turning point for
the project (which originally was focusing on dynamic effects), and to
this day is one of the first steps for everything procedural such as
hair.
Note that the modifier icon is still showing as white in the outliner.
The alternative is to be blue everywhere.
Patch review and feedback by Hans Goudey.
Icon creation in collaboration with Pablo Vazquez.
029cf23d71 changed some icons alignment, but after 9be49a1069
the icons don't align anymore. This commit reverts 029cf23d71 and
also makes a couple of other outliner icons left aligned, instead of
right aligned, for consistency and general alignment.
Differential Revision: https://developer.blender.org/D14501
The indirect library data icon was just a grayed out version of the
regular one. This graying out is now done in code, so the icon can be
removed from the SVG. Note that the icon is still defined as
`ICON_LIBRARY_DATA_INDIRECT` (or `LIBRARY_DATA_INDIRECT` in BPY).
The patch slightly modifies two recently added icons "FILE_BLEND" and
"CURRENT_FILE" to better align them to the pixel grid, and change the
design of "FILE_BACKUP" to avoid alignment and readability issues, as
well as avoiding the outline version of the Blender logo which violates
the official logo guidelines.
Differential revision: https://developer.blender.org/D13346
The Blender icon must not be used to refer to anything that is not
Blender itself. Using the Blender icon on its own to refer to .blend
files or the currently open file is a no-go, which was brought up by
Ton.
This does the following changes to the icon file:
* Add new "Current File" icon
* Change the .blend file icon to contain a file icon with the Blender
logo, but not merely the Blender logo.
* Change the backup .blend file icon accordingly.
The new "Current File" icon is used in the Asset Browser, but
could/should be used in the Outliner as well. That needs more design
discussion though.
This patch corrects the misalignment of some icons.
Some of them can't be centered because they would look blurry, but look better if shifted to the right instead of shifted to the left.
{F10864196 size=full} {F10864202 size=full}
{F10864216} {F10864228}
{F10864231 size=full} {F10864234 size=full}
{F10867008 size=full} {F10867015 size=full}
Reviewed By: #user_interface, pablovazquez
Differential Revision: https://developer.blender.org/D12789
Using `make icons` for 420f538fad changed some icons that it shouldn't have
touched on my system. Not sure what caused this, maybe a bug in the slightly
outdated Inkscape version there (1.0.1). Here on macOS the version is only
reported as 1.0 so I'm not sure what the situation is. Either way, this fixes
the icons.
Sync the list of icons in CMakeLists.txt with UI_icons.h.
Restore, in the source file, the FUND icon that was accidentally
deleted.
Delete four old/unused icons.
See also D9715.
This adds color tagging to collections. There are 8 color
options which are themable in the user preferences, with an additional
option for no color tag by default.
This adds a new filled collection icon and 8 colored variants of the
icon that can be themed in the user preferences.
In this commit the only interface to setting the color tags is through
Python, and there is nowhere in the interface where the collections are
shown colored. Setting and viewing the color tags from the outliner will
follow.
Manifest Task: https://developer.blender.org/T77777
Differential Revision: https://developer.blender.org/D8622
- New bespoke icon for the universal brush toggles
- New icon for Redirected Folder (currently unused)
- New icons for handle types (Auto Clamped, Auto, Aligned, Vector, Free)
- New icons for Sequencer Text Strip anchor (Top, Bottom, Left, Right, Centre)
Thanks to Andrzej Ambroż for the new icons
A collection of smaller changes that are required in the /blender/source files. A lot of them are also due to variable renaming.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3855
Changes file names of two icon 'dat' files to reflect previous identifier rename.
Differential Revision: https://developer.blender.org/D6166
Reviewed by Julian Eisel
Updated icon set from Andrzej Ambroż.
- Includes new icons for Top Bar, Status Bar, CD/DVD drives, Home, Documents, Temp, Memory, Options.
- Includes small tweaks to many icons throughout Blender
- Also adds a large CD/DVD drive icon for the file browser
This does not add the new icons in the interface yet.
New icons from Andrzej Ambroż (jendrzych)
- Many tweaks to existing icons, such as folders and drives for the new file browser, as well as snapping
- New icons for Checkmark, Transform Origins, Snap to Face Center, Zip Files (currently unused)
Adds a new icon for the action constraint so the icon draws with the
constraints color. Also adds two new icons for sequencer meta strips
and duplicate strips for use in the outliner sequence display mode.
The meta strip icon could be used in the sequencer sidebar.
Part of T66420
Option for snapping to the nearest point of a reference coordinate.
The patch also adds Edge Center and Perpendicular snaps to the ruler.
{F7675906}
Reviewers: campbellbarton, brecht
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D5543
This adds the icon intended for Grease Pencil layer data, in SVG but currently marked as blank
Differential Revision: https://developer.blender.org/D5073
Each constraint now has a unique icon, just like modifiers.
Icons are designed by Andrzej Ambroż & Alessio Monti, with user input.
Patch by Alessio Monti.
A few icons were missed in the last update.
- Added dedicated icon for showing hidden objects in the Graph Editor
- Added new, more descriptive icon for F-Curve snapshots
- Tweaks for Toggle Full Screen and Collections icons
This should be the final set for 2.80.
Thanks to Andrzej Ambroż for contributing this icon set.
New icons from Andrzej Ambroż / Jendrzych:
- Bespoke icon for creating new Collections
- Special icons for Rigid Body and Rigid Body Constraints (Physics Properties)
- New icons for Holdout and Indirect Only toggles in the Outliner
- New generic Cursor icon for cases that are not related to either Orientation or Pivot
Many other tweaks to existing icons, including:
- Add & Remove Keyframe
- Weight Paint & Collision Modifier
- Tablet Pressure Sensitivity
- Playback icons
New icons from Andrzej Ambroż / jendrzych:
- New icons for select tool modes
- Brought back screen icon for viewport visibility toggles
- Added new Instanced visibility toggle (unused currently - meant for forthcoming updates to the Outliner)
- New Gizmo icon for the header
- Many tweaks and alterations to existing icons. Full list on Devtalk
- Use correct icon when Proportional Editing is disabled
New icons from Andrzej Ambroż / jendrzych:
-Adds separate icons for 3D Cursor orientation and pivot
Also, many dozens of tweaks and updates - too many to mention here.
Full list is on Devtalk
New icons from Andrzej Ambroż / jendrzych:
-New trash icon for deleting ID's and other data (currently unused)
-New icon for the Grease Pencil select between strokes mode
-New icon for Proportional Editing Root Falloff curve
Also adjustments for Jump to Next / Prev. Keyframe, Camera ObData, Point Light ObData, Light Probe Object and ObData, Collection & Save icons.