There was an inconsistency between geometry sample nodes and mesh/curve
sample nodes, where the latter didn't have a special "Sample" category,
and we categorized as "Operations", which they were not. Also put the
sample category between "Read" and "Write" since the verb name is
more consistent and sampling is an advanced form of reading.
This will add a proper modal keymap for the node link drag operator.
It allows the user to customize the keys used to start drag and so on.
Also it gets rid of the custom status bar message.
Differential Revision: https://developer.blender.org/D17190
The operator has the option to add to selected FCurves instead
of only the active, but it was only exposed in the redo panel.
This patch adds the operator to the right-click menu on FCurve channels,
and to the channel menu in the Graph editor.
Both times with configured to add to selected
instead of only the active FCurve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D17066
Ref: D17066
- Replace type annotations with doc-strings, the current conventions is
not to use type annotations in startup scripts.
- Replace abbreviation "idx" with "index" in public arguments/properties.
- Replace `len(..) > 0` with boolean checks.
- Add `__all__` to list public members.
- Use `arg` instead of `param` for doc-strings.
- Locate the doc-string so it shows as `__doc__`.
Adds two operators to select linked vertices in weight paint mode.
Similar to how it works in edit mode.
Press "L" to select vertices under the cursor,
or CTRL + "L" to select anything linked to the current selection.
Reviewed by: Sybren A. Stüvel, Hans Goudey, Marion Stalke
Differential Revision: https://developer.blender.org/D16848
Ref: D16848
In the previous situation the message was shown for Apple devices.
But this is not correct and confusing.
- Apple with Metal backend are supported, OpenGL on Apple isn't
- Legacy devices on Windows or Linux are also not supported.
This change will check that the capabilities of the GPU match the
requirements to use Viewport compositor. Based on those capabilities
a message is shown and the panel is activated.
Extract:
- EEVEE: Compiling Shaders (the same message exists in EEVEE Next, but
it uses string concatenation and I don't know yet how to deal with
those--see T92758)
Disambiguate:
- Pan (audio, camera)
- Box (TextSequence)
- Mix (noun in constraints, GP materials)
- Volume (object type, file system)
- Floor (math integer part, 3D viewport horizontal plane)
- Impossible to disambiguate the constraint name because
bConstraintTypeInfo doesn't have a context field.
- Show Overlay (in the sequence editor, use the same message as other
editors to avoid a confusion with the Frame Overlay feature, also
called "Show Overlay")
Additionally, fix a few issues reported by Joan Pujolar (@jpujolar)
in T101830.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D17114
This operator updates scene strip internal length to reflect target
scene length. Previously scene strip had to be deleted and added from
scratch. Scene strip length in timeline will not be changed.
This adds a new operator: bpy.ops.mesh.flip_quad_tessellation()
This operator rotates the internal loops of the selected quads, allowing
the user to control tessellation without destructively altering the
mesh.
{F14201995}
This operator can be found in the "Face" menu (Ctrl+F) under "Face
Data".
{F14201997}
Reviewed By: campbellbarton, dbystedt
Differential Revision: https://developer.blender.org/D17056
This patch adds a draw_ui_list() function, which is a wrapper around
layout.template_list(). It implements generic add/remove/move buttons,
passing the correct "row" integer to template_list(), as well as a
drop-down menu, if provided, making it a complete solution for
consistent UILists for addons.
Differential Revision: https://developer.blender.org/D14119
Based on T99607:
- Existing Angle Control shortcuts are removed
- Voxel, Dyntopo and Hair resolution shortcuts are remapped to `R`
Since voxel remeshing is not compatible with dyntopo, each can use the shortcut `R` for the remeshing resolution without causing a conflict.
The shortcut `R` is not currently used for anything important.
The angle control menu is commonly not used.
And sculpt mode is only coincidentally inheriting the rotate operator shortcut on `R` because nothing else is mapped to the key.
Reviewed By: Julien Kaspar and Hans Goudey and Joseph Eagar
Differential Revision: https://developer.blender.org/D16511
Ref D16511
This addressed feature request T99811.
Added the following features to fully support importing USDZ archives:
- Added .usdz to the list of supported extensions.
- Added new USD import options to copy textures from USDZ archives. The
textures may be imported as packed data (the default) or to a directory
on disk.
- Extended the USD material import logic to handle package-relative texture
assets paths by invoking the USD asset resolver to copy the textures from
the USDZ archive to a directory on disk. When importing in Packed mode,
the textures are first saved to Blender's temporary session directory
prior to packing.
The new USD import options are
- Import Textures: Behavior when importing textures from a USDZ archive
- Textures Directory: Path to the directory where imported textures will
be copied
- File Name Collision: Behavior when the name of an imported texture file
conflicts with an existing file
Import Textures menu options:
- None: Don't import textures
- Packed: Import textures as packed data (the default)
- Copy: Copy files to Textures Directory
File Name Collision menu options:
- Use Existing: If a file with the same name already exists, use that
instead of copying (the default)
- Overwrite: Overwrite existing files
Reviewed by: Bastien
Differential Revision: https://developer.blender.org/D17074
This commit fixes T100674, Renamed the "axis" label under viewport display
panel to "axes" in object properties.
Differential Revision: https://developer.blender.org/D16650
Rewrite of the Workbench engine using C++ and the new Draw Manager API.
The new engine can be enabled in Blender `Preferences > Experimental > Workbench Next`.
After that, the engine can be selected in `Properties > Scene > Render Engine`.
When `Workbench Next` is the active engine, it also handles the `Solid` viewport mode rendering.
The rewrite aims to be functionally equivalent to the current Workbench engine, but it also includes some small fixes/tweaks:
- `In Front` rendered objects now work correctly with DoF and Shadows.
- The `Sampling > Viewport` setting is actually used when the viewport is in `Render Mode`.
- In `Texture` mode, textured materials also use the material properties. (Previously, only non textured materials would)
To do:
- Sculpt PBVH.
- Volume rendering.
- Hair rendering.
- Use the "no_geom" shader versions for shadow rendering.
- Decide the final API for custom visibility culling (Needed for shadows).
- Profile/optimize.
Known Issues:
- Matcaps are not loaded until they’re shown elsewhere. (e.g. when opening the `Viewort Shading` UI)
- Outlines are drawn between different materials of the same object. (Each material submesh has its own object handle)
Reviewed By: fclem
Maniphest Tasks: T101619
Differential Revision: https://developer.blender.org/D16826
This adds the following operators to edit mode:
- `select_all`
- `select_random`
- `select_end`
Differential Revision: https://developer.blender.org/D17047
This adds a new `Interpolate Curves` node. It allows generating new curves
between a set of existing guide curves. This is essential for procedural hair.
Usage:
- One has to provide a set of guide curves and a set of root positions for
the generated curves. New curves are created starting from these root
positions. The N closest guide curves are used for the interpolation.
- An additional up vector can be provided for every guide curve and
root position. This is typically a surface normal or nothing. This allows
generating child curves that are properly oriented based on the
surface orientation.
- Sometimes a point should only be interpolated using a subset of the
guides. This can be achieved using the `Guide Group ID` and
`Point Group ID` inputs. The curve generated at a specific point will
only take the guides with the same id into account. This allows e.g.
for hair parting.
- The `Max Neighbors` input limits how many guide curves are taken
into account for every interpolated curve.
Differential Revision: https://developer.blender.org/D16642
The name SAFE_AREAS_OT_preset_add lead to "Safe Areas" having it's own
section in the operator API docs. Name CAMERA_OT_safe_areas_preset_add
instead. Keep "safe_areas" as the preset directory for users with
existing presets.
The background evaluation samples the sky discretely, so if the sun is
too small, it can be missed in the evaluation. To solve this, the sun is
ignored during the background evaluation and its contribution is
computed separately.
The lookup table method on CPU and the numerical root finding method on
GPU give quite different results. This commit deletes the Beckmann lookup
table and uses numerical root finding on all devices. For the numerical
root finding, a combined bisection-Newton method with precision control
is used.
Differential Revision: https://developer.blender.org/D17050
wi is the viewing direction, and wo is the illumination direction. Under this notation, BSDF sampling always samples from wi and outputs wo, which is consistent with most of the papers and mitsuba. This order is reversed compared with PBRT, although PBRT also traces from the camera.
The Grease Pencil Material Popover currently has a color picker
for the Stroke of a Material using Solid style, but not one for
a Fill using Solid style.
With the default Grease Pencil Materials, the current
popover only shows the Stroke color for the grey "Solid Fill"
material (which doesn't have its Stroke enabled) instead of
the more useful Fill color.
This patch shows a Stroke color picker when the Material
has Stroke enabled and the style is Solid.
This is the same for the Fill.
Reviewed By: antoniov, mendio
Differential Revision: https://developer.blender.org/D17004
This fixes the UI alignment issues that were introduced by {D12815} with the addition of the boolean custom properties.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D17012
A proper boolean custom property type is commonly requested. This
commit simply adds a new `IDP_BOOLEAN` type that can be used for
boolean and boolean array custom properties. This can also be used
for exposing boolean node sockets in the geometry nodes modifier.
I've just extended the places existing IDProperty types are used, and
tested with the custom property edit operator and the python console.
Adding another IDProperty type is a straightforward extension of the
existing design.
Differential Revision: https://developer.blender.org/D12815
The menus are growing too large. This patches move some categories under
sub-menus, and shuffle some entries around.
We already had sub-categories split by separators. This change now
goes a step further and embrace 3-level menus.
Inspired by the "Simpler Add Menu" add-on by Quackers (waiting to hear
back to know Quackers real name).
Inspired by the "Simpler Add Menu" add-on by Alfonso Martinez II.
Differential Revision: https://developer.blender.org/D16993
In case there is only 1 key on the FCurve,
the operator can run into a situation where it divides by 0.
It now skips the curve in that case
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16982
Ref: D16982
Added an extrude mode enum to the trim operators to
control extrusion: "project" and "fixed." "Fixed" just
extrudes along a fixed normal and is the new default.
An apostrophe should not be used because it is not a mark of plural,
even for initialisms. This involves mostly comments, but a few UI
messages are affected as well.
Differential Revision: https://developer.blender.org/D16749
Set origin and convert operator now accepts point cloud and new curve
object. But these operators were not added in context menu.
Support for set origin and convert operator was added in
rBadb4dd911b91, rB933d56d9e98d and rB2752a88478a8
Reviewed by: HooglyBoogly
Differential Revision: https://developer.blender.org/D16939
Currently the `MLoopUV` struct stores UV coordinates and flags related
to editing UV maps in the UV editor. This patch changes the coordinates
to use the generic 2D vector type, and moves the flags into three
separate boolean attributes. This follows the design in T95965, with
the ultimate intention of simplifying code and improving performance.
Importantly, the change allows exporters and renderers to use UVs
"touched" by geometry nodes, which only creates generic attributes.
It also allows geometry nodes to create "proper" UV maps from scratch,
though only with the Store Named Attribute node for now.
The new design considers any 2D vector attribute on the corner domain
to be a UV map. In the future, they might be distinguished from regular
2D vectors with attribute metadata, which may be helpful because they
are often interpolated differently.
Most of the code changes deal with passing around UV BMesh custom data
offsets and tracking the boolean "sublayers". The boolean layers are
use the following prefixes for attribute names: vert selection: `.vs.`,
edge selection: `.es.`, pinning: `.pn.`. Currently these are short to
avoid using up the maximum length of attribute names. To accommodate
for these 4 extra characters, the name length limit is enlarged to 68
bytes, while the maximum user settable name length is still 64 bytes.
Unfortunately Python/RNA API access to the UV flag data becomes slower.
Accessing the boolean layers directly is be better for performance in
general.
Like the other mesh SoA refactors, backward and forward compatibility
aren't affected, and won't be changed until 4.0. We pay for that by
making mesh reading and writing more expensive with conversions.
Resolves T85962
Differential Revision: https://developer.blender.org/D14365
**Changes**
As described in T93602, this patch removes all use of the `MVert`
struct, replacing it with a generic named attribute with the name
`"position"`, consistent with other geometry types.
Variable names have been changed from `verts` to `positions`, to align
with the attribute name and the more generic design (positions are not
vertices, they are just an attribute stored on the point domain).
This change is made possible by previous commits that moved all other
data out of `MVert` to runtime data or other generic attributes. What
remains is mostly a simple type change. Though, the type still shows up
859 times, so the patch is quite large.
One compromise is that now `CD_MASK_BAREMESH` now contains
`CD_PROP_FLOAT3`. With the general move towards generic attributes
over custom data types, we are removing use of these type masks anyway.
**Benefits**
The most obvious benefit is reduced memory usage and the benefits
that brings in memory-bound situations. `float3` is only 3 bytes, in
comparison to `MVert` which was 4. When there are millions of vertices
this starts to matter more.
The other benefits come from using a more generic type. Instead of
writing algorithms specifically for `MVert`, code can just use arrays
of vectors. This will allow eliminating many temporary arrays or
wrappers used to extract positions.
Many possible improvements aren't implemented in this patch, though
I did switch simplify or remove the process of creating temporary
position arrays in a few places.
The design clarity that "positions are just another attribute" brings
allows removing explicit copying of vertices in some procedural
operations-- they are just processed like most other attributes.
**Performance**
This touches so many areas that it's hard to benchmark exhaustively,
but I observed some areas as examples.
* The mesh line node with 4 million count was 1.5x (8ms to 12ms) faster.
* The Spring splash screen went from ~4.3 to ~4.5 fps.
* The subdivision surface modifier/node was slightly faster
RNA access through Python may be slightly slower, since now we need
a name lookup instead of just a custom data type lookup for each index.
**Future Improvements**
* Remove uses of "vert_coords" functions:
* `BKE_mesh_vert_coords_alloc`
* `BKE_mesh_vert_coords_get`
* `BKE_mesh_vert_coords_apply{_with_mat4}`
* Remove more hidden copying of positions
* General simplification now possible in many areas
* Convert more code to C++ to use `float3` instead of `float[3]`
* Currently `reinterpret_cast` is used for those C-API functions
Differential Revision: https://developer.blender.org/D15982
This patch moves the realtime compositor out of experimental. See
T99210.
The first milestone is finished with regards to implementing most
essential nodes for single pass compositing. It is also now documented
in the manual and no major issues are known.
Differential Revision: https://developer.blender.org/D16891
Reviewed By: Clement Foucault
The "While Held" option from the Pose Propagate Operator
doesn't do anything meaningful.
After talking with the Animation Module it was decided to remove it.
In code it was called `POSE_PROPAGATE_SMART_HOLDS`
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16771
Ref: D16771
Added a new operator that aligns selected keys on an exponential curve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D9479
Ref: D9479
When pasting nodes with the shortcut or the context menu, place the
center of the selected nodes at the same position as the mouse cursor.
This should save time, and is more intuitive because the new nodes are
actually visible.
Based on a patch by Juanfran Matheu (@jfmatheu).
Differential Revision: https://developer.blender.org/D10787
There are two underlying issues which got uncovered by the report:
First, is that the poll() function for the operator was using legacy
API which is on its way of removal in the next major version release.
This part is fixed in this patch based on a patch provided by Philipp
Oeser (P3389) with the modification that the `clip` is not accessed
prior to None check. Ended up in a bit annoying one-liner, the entire
function could be refactored to use early returns.
The second issue is that the Python access to the legacy property
was wrong: need to access camera reconstruction instead of accessing
deprecated DNA field.
It's confusing for users when the Dopesheet's Editor Buttons for Grease Pencil are greyed out.
{F14099985}
[[ https://blenderartists.org/t/cant-create-new-layers-in-grease-pencil-dopesheet/1353882 | Can’t create new layers in grease pencil dopesheet ]]
This is often because the 'Only Show Selected' filter is disabled. This 'requirement' does not seem to be necessary since the Dopesheet is already in Grease Pencil mode and there is an active Grease Pencil Object. It is also not apparent as to why so many Operators depend on it and unintuitive that it controls their function. The 'Only Show Selected' filter button is far away from the Operator buttons in the User Interface Header, so it's difficult to make the association.
If the 'Only Show Selected' IS absolutely required, I believe it should be closer to the DOPESHEET_HT_editor_buttons. Otherwise, I think the requirement should be removed.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D16885
This patch adds rename popup when using Y key to switch
active layer and choosing New layer in Draw mode.
It follows https://developer.blender.org/D15092, which introduced this
for moving selected strokes to layers in Edit mode.
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D16877
Remove the option to display the real size of the cursor
and set as default. Now the cursor is displayed or not using
show_cursor option, but if it's displayed always use the real size.
This patch makes sure that each of the expand keymap entries will use consistent "invert" and "use_mask_preserve" properties.
Based on previous discussions we decided to flip the default Mask Expand behavior.
This has multiple benefited:
- The mask creation is more consistent with other masking tools (Always add to existing mask. Mask selected areas)
- It's easier to use expanding for masking face sets (Snapping with `Ctrl`) or building a mask from repeated operations
- It's less likely to mask certain areas unintentionally (Loose mesh islands)
- If the current behavior is desired for an expand operation the user can use `E` & `F` in the modal keymap (Which is less often the case).
If we want to revisit the original design of inverted masking again in the future we should do this via {T97903}.
Reviewed By: Joseph Eagar
Differential Revision https://developer.blender.org/D16434
Ref D16434
Remove the redundant option to disable selection in order to simplify
the tools and UI, both conceptually and internally.
It was possible to disable curves selection completely by clicking on
the active selection domain. However, that was redundant compared to
just selecting everything by pressing "A". The remaining potential use
could have been saving a selection for later, but that can be done with
more complete attribute editing tools in the future.
This panel showed a duplication of options that were in the main light panel and only mistakenly shows up in the workbench engine where lights should have no options.
This panel was also used by the POV-Ray add-on but that was removed recently.
When drawing strokes in Grease Pencil, it was always a bit hard
to predict how thick the strokes would be, because there was
no visual reference of the thickness in the cursor.
This patch adds that visual reference. It shows the brush size
as a circle in the draw cursor.
Showing the brush size can be toggled in the Cursor menu
of the Grease Pencil draw tool.
Request in RCS with 26 upvotes for this option:
https://blender.community/c/rightclickselect/0zfbbc
On the technical side: the brush size is calculated
in 3D space and takes zoom level into account, as well as
object/layer transfrom, layer thickness change (gpl->line_change)
and thickness scale (gpd->pixfactor).
Reviewed By: mendio, antoniov
Differential Revision: https://developer.blender.org/D16851
This replaces the old Edit menu, creating a menu only for catalog
operators. The Undo/Redo were already working only for catalogs, so now
this is more clear.
The menu also contains the Save and New catalog operators.
Differential Revision: https://developer.blender.org/D16820
Make the "Clear Motion Paths" operators more intuitive. Previously, the
only way to clear the motion path of the selected object/bone would be
to shift-click the "Clear ALL Motion Paths" button. Now there are two
"X" buttons, one for "selected" and one for "all".
The "Clear Selected" and "Clear All" buttons align with the
corresponding "Update Selected" and "Update All" buttons.
(MacOS) only: In the System tab of the user preferences the user has the
ability to select a GPU backend that Blender will use. After changing
the GPU backend setting, the user has to restart Blender before the
setting is used.
It was added to start collecting feedback on the Metal backend without
using the command lines.
By default Blender will select OpenGL as backend. When Metal is selected
(via `--gpu-backend metal` or via user preferences) OpenGL will be used as
fallback when the platform isn't capable of running Metal.
This patch allows skipping the automatic insertion of nodes on top of
links when the transform operator ends. When putting nodes into small
spaces this often gets in the way and wastes time. Now, when holding
`alt`, this is turned off.
The header text is also improved to add this shortcut and to remove
the Dx and Dy values and improve the formatting a bit.
Making this functionality optional might allow us to use it in more
places in the future, like for the nodes added by link-drag-search.
Differential Revision: https://developer.blender.org/D16230
This was only called once in a situation where such functions
are typically used as a dynamic enum callbacks.
Prefer keeping the items close to the EnumProperty definition &
avoid the need to note why this is a special case that doesn't follow
the common pattern for enum callbacks.
- Follow sphinx conventions for doc-strings.
- Use __slots__ for KeyframesCo as dynamically assigning new members
isn't needed.
- Import from bpy.types instead of assigning.
- Split typing imports across multiple lines as they tend to become
quite large.
* Make it clearer that contrib isn't shipped with releases, by already excluding it in beta.
* Improve the UI by hiding the "Testing" enum item in these case.
Differential Revision: https://developer.blender.org/D16729
Expand the motion path frame range options with an extra option "Manual
Range". When chosen, Blender will not automatically update the path
range any more.
Additionally, the start/end frame fields are greyed out in the UI when
one of the automatic range options is selected (i.e. all but the new
"Manual Range" one). It is still possible to set the start/end frame
temporarily, but the original behaviour (of recomputing those on update)
remains.
Manifest Task: T101522
Improve a few messages, but mostly fix typos in many areas of the UI.
See inline comments in the differential revisiion for the rationale
behind the various changes.
Differential Revision: https://developer.blender.org/D16716
The Blur Attribute node mixes values of neighboring elements in meshes and curves.
Currently it supports points, edges and faces on meshes and points on curves.
In theory, support for face corners could be added, but useful semantics are not
obvious yet.
The node calculates a weighted average of each element with its neighbors (based
on curve/mesh topology). The weight of the element itself is always 1, and the weight
of the neighbor elements is controlled by the weight input socket. In the future,
more options for how different elements are weight can be added (e.g. smoothing
groups and selection).
The node can perform multiple blurring iterations to achieve a blurrier result.
Generally, it is better to do multiple iterations in one node instead of using
multiple blur nodes because it has better performance in the current implementation.
We use the term "Blur" (instead of "Smooth") because smoothing is generally more
related to removing roughness from surfaces. When viewing the result of the
Blur Attribute node in the viewport, it looks like an image is blurred. While the
node can also be used to smooth surfaces, other/better algorithms exists for that
purpose (which e.g. don't reduce the volume of the mesh to zero with too many
iterations).
Differential Revision: https://developer.blender.org/D13952
**Problem**:
Area lights in Cycles have spread angle, in which case some part of the area light might be invisible to a shading point. The current implementation samples the whole area light, resulting some samples invisible and thus simply discarded. A technique is applied on rectangular light to sample a subset of the area light that is potentially visible (rB3f24cfb9582e1c826406301d37808df7ca6aa64c), however, ellipse (including disk) area lights remained untreated. The purpose of this patch is to apply a techniques to ellipse area light.
**Related Task**:
T87053
**Results**:
These are renderings before and after the patch:
|16spp|Disk light|Ellipse light|Square light (for reference, no changes)
|Before|{F13996789}|{F13996788}|{F13996822}
|After|{F13996759}|{F13996787}|{F13996852}
**Explanation**:
The visible region on an area light is found by drawing a cone from the shading point to the plane where the area light lies, with the aperture of the cone being the light spread.
{F13990078,height=200}
Ideally, we would like to draw samples only from the intersection of the area light and the projection of the cone onto the plane (forming a circle). However, the shape of the intersection is often irregular and thus hard to sample from directly.
{F13990104,height=200}
Instead, the current implementation draws samples from the bounding rectangle of the intersection. In this case, we still end up with some invalid samples outside of the circle, but already much less than sampling the original area light, and the bounding rectangle is easy to sample from.
{F13990125}
The above technique is only applied to rectangle area lights, ellipse area light still suffers from poor sampling. We could apply a similar technique to ellipse area lights, that is, find the
smallest regular shape (rectangle, circle, or ellipse) that covers the intersection (or maybe not the smallest but easy to compute).
For disk area light, we consider the relative position of both circles. Denoting `dist` as the distance between the centre of two circles, and `r1`, `r2` their radii. If `dist > r1 + r2`, the area light is completely invisible, we directly return `false`. If `dist < abs(r1 - r2)`, the smaller circle lies inside the larger one, and we sample whichever circle is smaller. Otherwise, the two circles intersect, we compute the bounding rectangle of the intersection, in which case `axis_u`, `len_u`, `axis_v`, `len_v` needs to be computed anew. Depending on the distance between the two circles, `len_v` is either the diameter of the smaller circle or the length of the common chord.
|{F13990211,height=195}|{F13990225,height=195}|{F13990274,height=195}|{F13990210,height=195}
|`dist > r1 + r2`|`dist < abs(r1 - r2)`|`dist^2 < abs(r1^2 - r2^2)`|`dist^2 > abs(r1^2 - r2^2)`
For ellipse area light, it's hard to find the smallest bounding shape of the intersection, therefore, we compute the bounding rectangle of the ellipse itself, then treat it as a rectangle light.
|{F13990386,height=195}|{F13990385,height=195}|{F13990387,height=195}
We also check the areas of the bounding rectangle of the intersection, the ellipse (disk) light, and the spread circle, then draw samples from the smallest shape of the three. For ellipse light, this also detects where one shape lies inside the other. I am not sure if we should add this measure to rectangle area light and sample from the spread circle when it has smaller area, as we seem to have a better sampling technique for rectangular (uniformly sample the solid angle). Maybe we could add [area-preserving parameterization for spherical
ellipse](https://arxiv.org/pdf/1805.09048.pdf) in the future.
**Limitation**:
At some point we switch from sampling the ellipse to sampling the rectangle, depending on the area of the both, and there seems to be a visible line (with |slope| =1) on the final rendering
which demonstrate at which point we switch between the two methods. We could see that the new sampling method clearly has lower variance near the boundaries, but close to that visible line,
the rectangle sampling method seems to have larger variance. I could not spot any bug in the implementation, and I am not sure if this happens because different sampling patterns for ellipse and rectangle are used.
|Before (256spp)|After (256spp)
|{F13996995}|{F13996998}
Differential Revision: https://developer.blender.org/D16694
This updates the libraries dependencies for VFX platform 2023, and adds various
new libraries. It also enables Python bindings and switches from static to
shared for various libraries.
The precompiled libraries for all platforms will be updated to these new
versions in the coming weeks.
New:
Fribidi 1.0.12
Harfbuzz 5.1.0
MaterialX 1.38.6 (shared lib with python bindings)
Minizipng 3.0.7
Pybind11 2.10.1
Shaderc 2022.3
Vulkan 1.2.198
Updated:
Boost 1.8.0 (shared lib)
Cython 0.29.30
Numpy 1.23.2
OpenColorIO 2.2.0 (shared lib with python bindings)
OpenImageIO 2.4.6.0 (shared lib with python bindings)
OpenSubdiv 3.5.0
OpenVDB 10.0.0 (shared lib with python bindings)
OSL 1.12.7.1 (enable nvptx backend)
TBB (shared lib)
USD 22.11 (shared lib with python bindings, enable hydra)
yaml-cpp 0.8.0
Includes contributions by Ray Molenkamp, Brecht Van Lommel, Georgiy Markelov
and Campbell Barton.
Ref T99618
Instead of the the same folder as the Blender executable, generate a manifest
that lets us move the libraries out of the way of users and into a separate
folder.
Ref T99618
Remove most of the old (pre-3.0) pose library:
- Remove The entire `editors/armature/pose_lib.c` file
- Deprecate `Object::poselib` in DNA
- Remove Operators marked as deprecated in T93405
- Remove RNA property `Object.pose_library`
- Add comment to clarify that the call `BLO_read_id_address(reader,
ob->id.lib, &ob->poselib);` handles deprecated data.
Note that this functionality has been documented as deprecated since
Blender 3.2.
What remains of the old pose library: The DNA for action markers
(`bAction::markers`) and the corresponding Python API. This will allow
future versions of Blender to still convert old pose libraries to new
ones (via the Pose Library panel in the Action editor).
Manifest task: T93406
rB8b7cd1ed2a17 broke this for the paint slots
rB4669178fc378 broke this for regular attributes
Name filtering in UI Lists works when:
- [one] the items to be filtered have a name property
-- see how `uilist_filter_items_default` gets the `namebuf`
- [two] custom python filter functions (`filter_items`) implement it
themselves
-- if you use `filter_items` and dont do name filtering there, the default
name filtering wont be used
So, two problems with rB8b7cd1ed2a17:
- [1] items to be listed changed from `texture_paint_images` to
`texture_paint_slots`
-- the former has name_property defined, the later lacks this
- [2] the new `ColorAttributesListBase` defined a `filter_items` function,
but did not implement name filtering
And the problem with rB4669178fc378:
- it added `filter_items` functions, but did not implement name filtering.
These are all corrected now.
Fixes T102878
Maniphest Tasks: T102878
Differential Revision: https://developer.blender.org/D16676
This unassign the Alt+D shortcut from the detach operator. Right now the
operator has to be accessed via the menu.
Alt+D is left for duplicate link, following the other editors.
`is_internal` is supposed to mean that the attribute shouldn't be
visible in lists or the spreadsheet by default, and that it can't be
accessed in geometry nodes. But the value was reversed, which
just happened to work because the list filtering was swapped.
Differential Revision: https://developer.blender.org/D16680
When entering paint modes the paint pivot was cleared,
which broken rotate around pivot. Fixed for all paint modes.
PBVH modes set the pivot to the PBVH bounding box
while texture paint uses the evaluated mesh bounding box.
a5e7657cee missed this call where clamped slicing is necessary.
The subdivision of a segment purposefully modifies the handle types of
the other side of the following control point, but that didn't work for
the final cyclic segment.
With the asset identifier introduced in the previous commit, we can now
locate an asset just from its `AssetRepresentation`, without requiring
information from the asset library and the file browser storage. With
this we can remove some hacks and function parameters. A RNA/BPY
function is also affected, but I didn't remove the paramter to keep
compatibility. It's simply ignored and not required anymore, noted this
in the parameter description (noted for T102877).
When applying the "Bake Action" operator in pose mode
it could throw an error saying "Nothing to Bake"
even though bones are selected
That is because the code was looking for a selected armature
But in Pose Mode, clicking into empty space to de-select would also
deselect the armature.
Then box selecting would not make the armature selected again
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16593
When applying the "Bake Action" operator in pose mode
it could throw an error saying "Nothing to Bake"
even though bones are selected
That is because the code was looking for a selected armature
But in Pose Mode, clicking into empty space to de-select would also
deselect the armature.
Then box selecting would not make the armature selected again
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D16593
Actually, the interpolation can be done only between keyframes different of breakdown type,
but in some cases, this is not convenient.
Now, a new option is displayed to allow the interpolation using breakdown keyframes
as interpolation extremes.
Reviewed By: mendio, pepeland
Differential Revision: https://developer.blender.org/D16515
This patch makes the Bake Actions operator fills the Start Frame & End From with that of the Preview Range if "Use Preview Range" is enabled.
{F13973619}
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16630
When accessing certain structure fields from Python, they return
mathutils types instead of generic arrays (this is based on subtype).
This exposes this information in the Python API documentation.
Differential Revision: https://developer.blender.org/D16626
When in greasepencil sculpt-/vertexpaint mode and using selection
masking, picking points wasnt working correctly.
So regular gpencil.select (without modifier keys) was not enabled for the
keymap. This only really makes sense for RCS (right click select) atm
(and not using RC fallback tools - which I dont think are present in
these modes anyways). With RCS, this can be supported and afaict, this
does not cause conflicts.
NOTE: prior to D16576, one could use the ALT modifier key (this
combination was actually in the keymap) -- but it should select the
entire stroke, which is handled in D16576.
Differential Revision: https://developer.blender.org/D16577
With this change Blender, delivered via the Microsoft store, will launch without the console window flashing.
Ref T88613
Differential Revision: https://developer.blender.org/D16589
Previously when using the "Jump To Keyframe" operator
in conjunction with subframes, the decimal part would be kept.
Meaning that it wouldn't jump exactly to the frame.
This fix also makes it so it is possible to jump to keyframes
that are on subframes.
Reviewed by: Sybren
Differential Revision: https://developer.blender.org/D16595
With this change Blender, delivered via the Microsoft store, will launch without the console window flashing.
Ref T88613
Differential Revision: https://developer.blender.org/D16589
This patch disables the realtime compositor on MacOS until Metal is
supported. This is because MacOS doesn't support the necessary GPU
features to make it work.
An engine error overlay is displayed if it is enabled and the option
itself is greyed out.
See T102353.
Differential Revision: https://developer.blender.org/D16510
Reviewed By: Clement Foucault
This patch turns the checkbox option to enable the viewport compositor
into a 3-option enum that allows:
- Disabled.
- Enabled.
- Enabled only in camera view.
See T102353.
Differential Revision: https://developer.blender.org/D16509
Reviewed By: Clement Foucault
This avoids need to do special trickery detecting whether the principal
point is to be changed when reloading movie clip. This also allows to
transfer the optical center from high-res footage to possibly its lower
resolution proxy without manual adjustment.
On a user level the difference is that the principal point is exposed in
the normalized coordinates: frame center has coordinate of (0, 0), left
bottom corner of a frame has coordinate of (-1, -1) and the right top
corner has coordinate of (1, 1).
Another user-visible change is that there is no more operator for setting
the principal point to center: use backspace on the center sliders will
reset values to 0 which corresponds to the center.
The code implements versioning in both directions, so it should be
possible to open file in older Blender versions without loosing
configuration.
For the Python API there are two ways to access the property:
- `tracking.camera.principal_point` which is measured in the normalized
space.
- `tracking.camera.principal_point_pixels` to access the pixel-space
principal point.
Both properties are not animatable, so there will by no conflict coming.
Differential Revision: https://developer.blender.org/D16573
Always position the nodes added with the node search at the point where
the search operator was invoked by ensuring the operator context is the
main node editor region.
This was an unintended change of rBbdb57541475f, caused by the operator
now getting the cursor position in region space. So when the operator
was called from the menu, it would get the cursor position in the
region space of the menu, which lead to an offset when adding the node
since it expected the coordinates to be in the space of the node editor.
Setting the correct operator context also fixes inconsistent transform
sensitivity depending on zoom when adding nodes via the search in the
menu which has been an issue since as far back as Blender 2.79.
Also includes a small fix for the vertical offset of nodes added by the
search which varied depending on the UI scale. Same fix as in
rB998ffcbf096e.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16555
This feature has been disabled since 2.80 but the feature description was still visible in the UI.
Addresses part of T101429
Breaking changes:
- Removes `EDGESLIDE_EDGE_NEXT`
- Removes `EDGESLIDE_PREV_NEXT`
Reviewed By: mano-wii
Maniphest Tasks: T101429
Differential Revision: https://developer.blender.org/D16430
These materials were missing from the "Change Active Material" menu.
Caused by rBe3faef686d38.
Error was getting the preview [which wasnt there yet]
These only appeared once the material tab in the Properties Editor was
used (since this ensured a valid preview icon).
Above commit changed behavior for RNA icon getter (this does not create
data anymore), so ensure the preview by hand here.
Similar to rB182edd4c35c2.
Fixes T102566.
Maniphest Tasks: T102566
Differential Revision: https://developer.blender.org/D16541
The Node Context Menu contains options that are not always available for
the selected nodes, and misses important entries for accesibility.
This patch covers the following:
* Add operators to join and remove nodes from frames.
* Sort and group entries more logically and follow Blender conventions.
* Add `Insert into Group`
* Show group actions only on nodes that support it.
* Move all toggles to a sub-menu called `Show/Hide`.
* When nothing is selected, show Add menu, links actions, and paste.
Inspired by RightClickSelect proposals and community feedback.
See D16216 for images.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D16216
The draw locking was implemented for project Heist and moved behind an experimental
feature after it became clear there were issues with it. Nowadays it isn't used,
and the idea is to replace it with a different solution after all draw engines have
been ported to the new draw manager API. {T102180}
This patch will remove the experimental feature as it isn't used, or useful.
I18n: make a few messages translatable
* Missing Paths * in the Presets menu when no preset exists yet.
The White Noise entry in the Add Node menu is the only one lacking a "Texture" suffix, which doesn't seem justified since the node itself is already called "White Noise Texture". Rename the entry its name can be extracted and used for the node--and for consistency.
New object material node names (Principled BSDF, Material Output) come from a preset node tree. The nodes' names need to be translated after creation.
Extract the "Fallback Tool" pie menu title.
Translate grease pencil options in the viewport overlay menu.
Ref T102030.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16345
Many reports and a few labels used string formatting without
explicitly calling tip_() or iface_(), so the untranslated message
was used instead of the translated one, even when it was extracted.
Differential Revision: https://developer.blender.org/D16405
Mask from cavity can now pull settings from three
places: the operator properties, scene tool settings
or the brush. This is needed to make the "create mask"
button work as expected.
Mask from cavity can now pull settings from three
places: the operator properties, scene tool settings
or the brush. This is needed to make the "create mask"
button work as expected.
Some operator layout buttons with custom text did not get the proper
context: they'd get * instead of Operator.
This was probably never noticed because the only operator that
actually had this issue was Import Images as Planes in the Add menu.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15993
The property assignment operators' tooltips were never actually
translated when they were constructed dynamically from the description
in the prop's RNA.
This was visible when using such operators in menus (example I found
was the Marker Settings, Shift + E in the Movie Clip Editor).
"%s: %s" is already extracted elsewhere, might as well use it.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16439
- The label for modal keymaps was extracted but did not use the proper
context on translation.
- Same goes for modal keymap items.
- Extract the UI messages from rna_keymap_ui.py
- Translate global keymap names.
- Use the proper context in the status bar for the tool prompt operator
Ref T102071
Maniphest Tasks: T102071
Differential Revision: https://developer.blender.org/D16348
This commit adds a new "Image Info" node to retrieve various
information from an image like its width, height, and whether
it has an alpha channel. It is also possible to retrieve the FPS
and frame count of video files.
Differential Revision: https://developer.blender.org/D15042
This patch adds a "Show Gizmo" toggle to the Movie Clip Editor header, for consistency with other editors.
{F13892765}
Differential Revision: https://developer.blender.org/D16437
Implement a new topology-based copy and paste solution for UVs.
Usage notes:
* Open the UV Editor
* Use the selection tools to select a Quad joined to a Triangle joined to another Quad.
* From the menu, choose UV > UV Copy
* The UV co-ordinates for your quad<=>tri<=>quad are now stored internally
* Use the selection tools to select a different Quad joined to a Triangle joined to a Quad.
* (Optional) From the menu, choose UV > Split > Selection
* From the menu, choose UV > UV Paste
* The UV co-ordinates for the new selection will be moved to match the stored UVs.
Repeat selection / UV Paste steps as many times as desired.
For performance considerations, see https://en.wikipedia.org/wiki/Graph_isomorphism_problem
In theory, UV Copy and Paste should work with all UV selection modes.
Please report any problems.
A copy has been made of the Graph Isomorphism code from https://github.com/stefanoquer/graphISO
Copyright (c) 2019 Stefano Quer stefano.quer@polito.it GPL v3 or later.
Additional integration code Copyright (c) 2022 by Blender Foundation, GPL v2 or later.
Maniphest Tasks: T77911
Differential Revision: https://developer.blender.org/D16278
Implements an operator to convert color attributes in
available domains and types, as described in T97106.
Differential Revision: https://developer.blender.org/D15596
The sculpt symmetrize operator's merge threshold now defaults
to 0.0005 instead of 0.001, which tends to be a bit too big for
metric scale.
Also changed its step and precision a bit to be more usable.
This is a minor naming update to make the box hide and show operators in sculpt mode follow current naming conventions.
Reviewed by: Joseph Eagar
Differential Revision: https://developer.blender.org/D16413
Ref D16413
The meta strip operator is available in the Add menu, but not in the
context menu.
This patch adds these two operators to the context menu:
* nla.meta_add
* nla.meta_remove
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D16353
Replace our Noto Sans CJK with a version that has Simplified Chinese
set as the default script.
See D16426 for details and examples
Differential Revision: https://developer.blender.org/D16426
Reviewed by Brecht Van Lommel
Replace our Noto Sans CJK with a version that has Simplified Chinese
set as the default script.
See D16426 for details and examples
Differential Revision: https://developer.blender.org/D16426
Reviewed by Brecht Van Lommel
The auto-masking was working by Brush and this was very
inconvenient because it was necessary set the options by
Brush, now the options are global and can be set at once.
Also, the automa-masking now works with `and` logic
and not with `or` as before. That means that a stroke
must meet all the conditions of the masking.
Added new Layer and Material options to masking the
strokes using the same Layer/Material of the selected stroke.
Before, only Active Layer and Active Material could be masked.
The options of masking has been moved to the top-bar using
the same design of Mesh Sculpt masking.
As result of the changes above, the following props changed:
Removed:
`brush.gpencil_settings.use_automasking_strokes`
`brush.gpencil_settings.use_automasking_layer`
`brush.gpencil_settings.use_automasking_material`
Added:
`tool_settings.gpencil_sculpt.use_automasking_stroke`
`tool_settings.gpencil_sculpt.use_automasking_layer_stroke`
`tool_settings.gpencil_sculpt.use_automasking_material_stroke`
`tool_settings.gpencil_sculpt.use_automasking_layer_active`
`tool_settings.gpencil_sculpt.use_automasking_material_active`
Reviewed by: Julien Kaspar, Matias Mendiola, Daniel Martinez Lara
Avoid accessing freed memory from dynamically allocated EnumPropertyItem
arrays. Rely on the memory being held by the iterator which isn't the
case when it was converted to a tuple.
Reorder the items in the `Locks` menu:
* Split into three groups: Lock, Unlock, Invert.
* Use icon only in the first item of each group, following the HIG.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D16383
This fixes T102218, where baked f-curves would display incorrectly when normalized.
This bug was a result of the code making no effort to determine the y-range of baked f-curves, so it fell back to a default that looked horrible.
I've added specific handling for finding the y-range of each f-curve (I extracted this functionality out to a new function, `fcurve_scene_coord_range_get`, for organization purposes). In addition, a minor optimization was made to eliminate redundant range-checks when in preview range mode.
{F13838304}
Reviewed By: sybren
Maniphest Tasks: T102218
Differential Revision: https://developer.blender.org/D16363
This patch builds on the work from bdb5754147 to add node group
assets directly in the node editor add menu. Assets are added after
separators to distinguish them, but otherwise they look like any other
node. The catalog trees from all configured libraries are used to build
the menu hierarchy. Only catalogs with matching asset types are used
though.
There are a few limitations of this initial version. For now this only
supports geometry nodes. Support for other built-in node systems just
requires some refactoring of the corresponding add menu though. Lazy
loading will be added in a followup commit. For now there is a label
the first time the menu is opened.
Like the search menu integration, re-saving asset library files in 3.4
is required, if it hasn't been done already.
Implementation wise, there is a some ugly code here. A lot of that is
because the asset system isn't complete. The RNA API doesn't work well
yet, and the system isn't built to interact with multiple libraries at
once. It's also ugly because of the way we combine automatic menu
generation with builtin menus. As noted in a code comment, these two
systems could be merged completely so that the menus for builtin nodes
are also generated in the same way.
Differential Revision: https://developer.blender.org/D16135
When pinning a Mesh, we cannot rely on the context object.
Instead, use the context mesh now.
For vertexgroups names [which are still on the object API wise], this
means name collisions cannot be checked when pinning a Mesh (so print
this as a warning in that case)
Maniphest Tasks: T102045
Differential Revision: https://developer.blender.org/D16333
Previously, the Blender video renderer did not have support for
encoding video to AV1 (not to be confused with the container AVI).
The proposed solution is to leverage the existing FFMpeg renderer
to encode to AV1.
Note that avcodec_find_encoder(AV_CODEC_ID_AV1) usually returns
"libaom-av1" which is the "reference implementation" for AV1 encoding
(the default for FFMpeg, and is slow). "libsvtav1" is faster and
preferred so there is extra handling when fetching the AV1 codec for
encoding such that "libsvtav1" is used when possible.
This commit should only affect the options available for video
rendering, which includes the additional AV1 codec to choose from, and
setting "-crf".
Also note that the current release of FFMpeg for ArchLinux does not
support "-crf" for "libsvtav1", but the equivalent option "-qp" is
supported and used as a fallback when "libsvtav1" is used (as
mentioned here: https://trac.ffmpeg.org/wiki/Encode/AV1#SVT-AV1 ).
(Actually, both "-crf" and "-qp" is specified with the same value in
the code. When a release of FFMpeg obtains support for "-crf" for
"libsvtav1" is released, the code shouldn't be needed to change.)
The usage of the AV1 codec should be very similar to the usage of the
H264 codec, but is limited to the "mp4" and "mkv" containers.
This patch pertains to the "VFX & Video" module, as its main purpose
is to supplement the Video Sequencer tool with the additional AV1
codec for encoded video output.
Differential Revision: https://developer.blender.org/D14920
Reviewed By: sergey , ISS, zeddb
For debugging it is useful to known the active GPU backend. Although
it could be determined from looking at the extensions, this is easier
to understand when not activly working in this area.
The users had to type in a name here, but we can also make it a dropdown
choice with existing UV Maps for convenience:
- dont have to remember a name or copy paste obviously
- shows in red if it was removed / invalid
Came up in T101028
Maniphest Tasks: T101028
Differential Revision: https://developer.blender.org/D15956
For consistency with other brush based (paint) systems we should add
these entries in the brushes context menu.
For this, expose the brushes `ob_mode` to RNA and show this (along with
the tool choice) to the appropriate menus.
Differential Revision: https://developer.blender.org/D16287
This was added in rB4c9fe657458f, however that new code never used this
menu (but the existing `VIEW3D_MT_brush_paint_modes` instead).
Differential Revision: https://developer.blender.org/D16285
Add auto-masking as a popover in the header while in Sculpt mode,
following the design in T101593.
These properties were present in the Options panel (and popover),
they have been removed from there.
Moreover, this commit makes the auto-masking section in Brush settings
match the new popover.
In the future this popover can be used for other modes that support
auto-masking such as Grease Pencil.
See D16145 for details and screenshots.
Reviewed By: JulienKaspar
Differential Revision: https://developer.blender.org/D16145
This operator (Alt + D) allows users to explicitly create a linked copy
of a group node (same current behaviour for the Duplicate operator).
The duplicate operator (Shift + D) now takes the new User Preference
duplicate data option for Node Tree into account. It is by default
disabled, leading to no functional change for users.
Although we could make in the future make this option "on" by default,
to make it consistent with the rest of Blender we do not at the time.
Differential Revision: https://developer.blender.org/D16210
This change is part of a wider set of changes to implement Grid and Pixel
snapping in the UV Editor. This particular change adds a new third option,
`pixel grid`, to the previous grid options, `dynamic grid` and `fixed grid`.
Maniphest Tasks : T78391
Differential Revision: https://developer.blender.org/D16197
In 22c3db72ca `SHOW_ALL` has been removed from
`face_set_change_visibility`. Instead `SCULPT_OT_reveal_all` is now used
for unhiding all face sets.
Reviewed By: Joseph Eagar & Julian Kaspar
Differential Revision: https://developer.blender.org/D16199
Ref D16199
Show the windowing environment on non MS-Windows/Apple systems,
since X11/WAYLAND are selected startup there was no convenient way
for users to know which back-end was being used.
Include the windowing environment in the About splash & system-info.txt
since it will be useful for handling bug reports.
This commit adds a private API call not intended for general use
as I would like to be able to remove this later and it's only needed
in the specific case of testing if Blender is using WAYLAND or X11
(which maybe be used via XWayland).
Python scripts can already inspect the system to check which windowing
environment used, the API call is mainly useful for troubleshooting.
b-init
Hans Goudey
Erik Abrahamsson
Christoph Lendenfeld
Campbell Barton
Jeroen Bakker
Weizhen Huang
Joseph Eagar
Bastien Montagne
Damien Picard
Richard Antalik
Aaron Carlisle
Colin Basnett
demeterdzadik@gmail.com
Aaron Carlisle
Michael Kowalski
Faheim Arslan M
Lukas Stockner
Miguel Pozo
Falk David
Jacques Lucke
Jeffrey Liu
Chris Blackbourn
Thomas Dinges
Kevin C. Burke
Colin Basnett
Dalai Felinto
Pratik Borhade
Martijn Versteegh
Omar Emara
Christoph Lendenfeld
YimingWu
Sergey Sharybin
Aleš Jelovčan
Antonio Vazquez
Sietse Brouwer
Sybren A. Stüvel
Jeroen Bakker
Thomas Dinges
Iliya Katueshenock
Ray Molenkamp
Philipp Oeser
Julian Eisel
Alexander Gavrilov
Leon Schittek
Pablo Vazquez
Ejner Fergo
Ramil Roosileht
Julien Kaspar
Jason Schleifer
Harley Acheson
Stephen Seo
Germano Cavalcante
Pratik Borhade