This assumed the OSX SDK version matched the OSX version, which isn't always true.
Also problematic for maintenance and would make building older Blender versions on OSX fail.
Passing in pre-defined OSX_SYSTEM is also supported,
if you have multiple and want to select one.
It'll be nice to eventually go C11/C++11 by default, but for until
then it's kinda handy to be able to build locally with C11 support,
Reviewers: mont29, campbellbarton
Reviewed By: mont29, campbellbarton
Differential Revision: https://developer.blender.org/D1752
Previously CMake would show many messages about missing libs before checking for a missing LIBDIR.
Now show the error immediately and exit.
Also allow for custom LIBDIR on OSX.
OpenVDB is compiled with Blosc support, meaning we should pass Blosc to
a linker now.
Unfortunately, the Blosc has compiled-in crt and pthread library, which
still screws up linking.
D1751, remove this library since its quite a specific - only supports an older version of this codec.
Also ffmpeg has added support for recent versions of the codec.
Seems i was the only one who was really up to using it and
i do have gcc-5 finally backported and installed here so
such a fine-tune flags are no longer needed.
We used to require the 3Dconnexion driver installed at build-time so
this was turned off.
I reworked the code last year to remove the driver dependency so
there’s no reason not to enable this.
simulations.
This commits implements OpenVDB as an extra cache format in the Point
Cache system for smoke simulations. Compilation with the library is
turned off by default for now, and shall be enabled when the library is
present.
A documentation of its doings is available here: http://
wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport.
A guide to compile OpenVDB can be found here (Linux): http://
wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/
Dependencies_From_Source#OpenVDB
Reviewers: sergey, lukastoenne, brecht, campbellbarton
Reviewed By: brecht, campbellbarton
Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli,
jtheninja, lukasstockner97, dingto, brecht
Differential Revision: https://developer.blender.org/D1721
This reverts commit b5bd39b518.
This is problematic because it means minor differences in system headers can cause errors
(glew in this case errored for me both with system and Blender's bundled version).
Developers can enable -Werror=* locally for warnings that aren't reliable across different systems.
This is the second time at least that kind of stuff slips in during one of my refactor,
a mere warning here is really not enough (too easy to miss it)!
Previously several areas were calling TEST_SHARED_PTR_SUPPORT and
TEST_UNORDERED_MAP_SUPPORT which isn't that bad on it's own but
was causing some quite verbose output with same information line
printed multiple times. additionally, what's more worse, define flags
for Ceres were duplicated in main CMakeLists and Ceres's CMakeLists.
Now we've got a single place where checks for those classes are
happening and other areas are simply checking for variables set by
those check macros, keeping CMake output clean and nice.
The main purpose of such linking is to make Blender compatible with
NVidia's debuggers and profilers which are doing some LD_PRELOAD
magic to intercept some function calls. Such magic conflicts with
our CUDA wrangler magic and causes segmentation faults.
The option is disabled by default, so there's no affect on any of
artists.
In order to make Blender linked directly against CUDA library use
the WITH_CUDA_DYNLOAD CMake option (it's marked as advanced).
Was lost since the original patch sent to Cambo, didn't notice the failure before
because had it applied locally.
Without this flag certain configuration wouldn't fins libgomp.
This is so called "seems to work in dry tests" commit which is aimed to switch
linux release environment to CMake.
Some notes:
- There's no special handle of libstdc++, but it wasn't really static for quite
some time in SCons configuration and nobody really complained.
- It was quite tricky to get OpenMP linked statically with just using some
configuration so we went ahead and added a special option to CMake now which is
only exist on Linux and advertised as shouldn't be used.
- Packing is happening manually in slave_pack.py. This is because we have to add
some really special files to the archive (mesa libraries for example) which we
can't really handle from CMake/CPack in a nice generic way.
Don't think it's bad approach, at least crappynness is localized and it's not
_that_ crappy anyway.
- Windows buildbot should keep working, but needs doublechecing. It's just a
build folder changed, but you never know what it might imply.
- Some further tweaks are likely needed to ensure all builders are working.
Thanks Campbell for assistance in this patch!
The main new feature is mixed variable declarations and code, which can help
reduce uninitialized variables or accidental variable reuse.
Due to incomplete C99 support in VS 2013, variable length arrays are not
supported, BLI_array_alloca must still be used. The header <tgmath.h> is also
not supported.
Differential Revision: https://developer.blender.org/D1631
CMake 3.0 ignores the suffixed COMPILE_DEFINITIONS_<CONFIG> variants if policy
CMP0043 is NEW, preferring instead to consume the unsuffixed COMPILE_DEFINITONS
property and evaluate generator expressions in it.
Setting the policy to OLD causes CMake 3.0 to not ignore those properties.
Use the suffixed properties for compatibility only for CMake versions older
than 3.0 using an explicit version check. Use the non-suffixed property with
generator expressions otherwise.
These definitions should mostly not be needed at all - CMake already sets
NDEBUG in suffixed CMAKE_CXX_FLAGS_<CONFIG> variables. The _DEBUG macro is
non-standard, but is used in several places in blender (usually in an OR
combination with the DEBUG macro). Additionally, blender overwrites (instead
of appending to) the CMAKE_CXX_FLAGS_<CONFIG> variables on WIN32.
Rather than try to fundamentally change how debug-macros are handled in
blender, change the buildsystem to keep the same behavior without requiring the
CMP0043 policy set to OLD.
This commit makes sure Linux and Windows buildbots are using OpenSubdiv
and also enables OpenSubdiv by default on Windows.
OSX is kept disabled still, this is due to OpenGL restrictions which are
not solved in any way yet.
Linux is defaults to OpenSubdiv disabled because it needs precompiled
library.
The documentation could be found there:
http://wiki.blender.org/index.php/User:Nazg-gul/OpenSubdiv
- rename WITH_EXTERNAL_AUDASPACE to WITH_SYSTEM_AUDASPACE.
- rename C/PYAUDASPACE to AUDASPACE_C/PY
- simplifying cmake defines and includes.
- fixing include paths and enabling WITH_SYSTEM_AUDASPACE for windows.
- fixing scons building.
- other minor build system fixes.
Previously Linux had disabled libs that were enabled on other platforms.
Use a reduced feature set on all, since libs such as Jack & OSL aren't totally reliable on Win/OSX.
Keep 'option_defaults_init' since platform maintainers may want to adjust later.
This commit contains all the remained parts needed for initial integration of
OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU
backends which works in the following way:
- When SubSurf modifier is the last in the modifiers stack then GPU pipeline
of OpenSubdiv is used, making viewport performance as fast as possible.
This also requires graphscard with GLSL 1.5 support. If this requirement is
not met, then no GPU pipeline is used at all.
- If SubSurf is not a last modifier or if DerivesMesh is being evaluated for
rendering then CPU limit evaluation API from OpenSubdiv is used. This only
replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG
structures exactly the same as they used to be for ages now.
This integration is fully covered with ifdef and not enabled by default
because there are several TODOs to be solved first:
- Face varying data interpolation is not really cleanly implemented for GPU
in OpenSubdiv 3.0. It is also not implemented for limit evaluation API.
This basically means we'll have really hard time supporting UVs.
- Limit evaluation only works with adaptivly subdivided meshes so far, which
basically means all the points of CCG are pushed to the limit. This gives
different result from old code.
- There are some serious optimizations possible on the topology refiner
creation, which would speed up initial OpenSubdiv mesh creation.
- There are some hardcoded asumptions in the GPU and DerivedMesh areas which
could be generalized.
That's something where Antony and Campbell can help, making it so the code
is structured in a way which is reusable by all planned viewport projects.
- There are also some workarounds in the dependency graph to make sure OpenGL
buffers are only freed from the main thread.
Those who'll be wanting to make experiments with this code should grab dev
branch (NOT master) from
https://github.com/Nazg-Gul/OpenSubdiv/tree/dev
There are some patches applied in there which we're working on on getting
into upstream.
It is rather annoying attitude nowadays to use const qualifier all over the
place, including using it for multi-dimensional arrays. This isn't really
supported in GCC prior to version 5.0 because it considers such an arrays
to be a "pointer to a const pointer" which gives implicit casting errors.
It's not possible to disable this particular type of warnings treated as
errors in any GCC version prior to 5.0 as well, meaning currently usage of
-Werror globally in Blender code is not possible at all.
This commit makes it possible to use -Werror in areas which are complaint
with older GCC versions. New advanced CMake options are:
- WITH_COMPOSITOR_WERROR
- WITH_LIBMV_WERROR
- WITH_CYCLES_WERROR
option.
This makes sense, since contexts get created at runtime, there is little
reason to require recompilation for this.
Only works on linux currently, will be doing more OSs later
Performance tests now have their own CMake macro, which ensures they do not get
added to ctest list, so we do not have to bother about them anymore, and can always
build them (when GTests are enabled, of course).
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
This commit makes some preliminary fixes and tweaks aimed to make blender
compilable with C++11 feature set. This includes:
- Build system attribute to enable C++11 featureset.
It's for sure default OFF, but easy to enable to have a play around with
it and make sure all the stuff is compilable before we go C++11 for real.
- Changes in Compositor to use non-named cl_int structure fields.
This is because __STRICT_ANSI__ is defined by default by GCC and OpenCL
does not use named fields in this case.
- Changes to TYPE_CHECK() related on lack of typeof() in C++11
This uses decltype() instead with some trickery to make sure returned type
is not a reference.
- Changes for auto_ptr in Freestyle
This actually conditionally switches between auto_ptr and unique_ptr since
auto_ptr is deprecated in C++11. Seems to be not strictly needed but still
nice to be ready for such an update anyway/
This all based on changes form depsgraph_refactor branch apart from the weird
changes which were made in order to support MinGW compilation. Those parts of
change would need to be carefully reviewed again after official move to gcc49
in MinGW.
Tested on Linux with GCC-4.7 and Clang-3.5, other platforms are not tested and
likely needs some more tweaks.
Reviewers: campbellbarton, juicyfruit, mont29, lukastoenne, psy-fi, kjym3
Differential Revision: https://developer.blender.org/D1089
We need to register the exception handler slightly differently here, as
well as adding DbgHelp as a library, but according to docs it should be
supported in recent Windows editions (Win XP included even).
We can try it first and revert if there are issues.
patch number D706 with changes:
- WITH_GPU_DEBUG just creates a debug context (and enables the debug messaging
system functions) but leaves the checks we had intact. Old patch
added the debug functionality only if we had the flag on to save some
performance.
Rationale here is that we might not want to recompile blender just to get
the extra information, and having users start blender with a -d flag to
get the extra information is also useful for bug reports. Those checks already
existed and most expensive ones are hidden behind a debug mode check
so performance should not be that bad.
- Did some cleanup of existing functionality:
When things go wrong blender side, just print the error,
don't check for GL errors first.
- Did not port changes needed for GLES to regular glew.h
- Got rid of duplicate or very similar new functionality.
Generally, code is more moving things around/cleanup and should work exactly
as before apart from the debug context, so it's safe to add even now.
It also provides a nice substitute function for glu error descriptions
CMake 2.8 doesn't search /usr/include/SDL2, which is the include directory
for SDL 2.x on Ubuntu Linux (and possibly others). This results in SDL 1.2
headers being found when WITH_SDL_DYNLOAD=OFF, and our shipped SDL 2.0
headers when WITH_SDL_DYNLOAD=ON. This patch ensures that in both
cases the correct SDL headers are used.
Reviewers: sergey, campbellbarton
Projects: #bf_blender
Differential Revision: https://developer.blender.org/D1112
It's really handy to have blender linked against jemalloc because of
much better memory fragmentation handling by that library.
To be noted: if jemalloc library is not found it'll be disabled with
message about that, no compilation error should happen.
Doesn't mean we're 100% ready for the transition, but need to start somewhere
anyway. Changes:
- OSL is no longer supporting cpp and requires usage of Boost Wave.
So now Wave component of Boost is optionally demanded when looking for the
Boost libraries if OSL is enabled.
Only did this for Linux, MSVC seems already using Wave. Not sure about OSX.
- Because of the same reason OSL should be moved prior Boost for linker.
- Whole archive trick makes it so linking fails with duplicated symbols, so
removed it for the new OSL. Didn't see issues with this so far.
- Added some code to check OSL version on Linux. Would need to move all that
to FindOpenShadingLanguage.cmake which we can get from Cycles standalone
repository.
So in theory no affect on current stup would be made at all.
- Added some tweaks to buildbot files. It now seems to be happy with the new
OSL libraries, but again, those tweaks are not in action yet.
All this was tested on Linux only. Win/OSX might still need some tweaks to
support new OSL.
P.S. This doesn't mean we're pushing OSL update yet, just making some
preliminary tweaks to avoid entropy of PITA when we'll actually want to
switch.
Basic idea is to check whether OIIO is compiled with embedded PugiXML parser
and if so use PugiXML from OIIO, otherwise find a standalone PugiXML library.
Original patch by @random (D765) with some minor work done by @campbell
and me.
At this place, I'd like call out a number of people who were involved and
deserve a big "Thank you!":
* At the first place @randon who developed and submitted the patch
* The Blendercn community which helped a lot with testing - espacially
* @yuzukyo, @leon_cheung and @kjym3
* @campbellbarton, @mont29 and @sergey for their help and advises during
* review
* @ton who realized the importance of this early on and asked me for
* reviewing
We are still not finished, as this is only the first part of the
implementaion, but there's more to come!
Default configuration already includes libmv and glog, so all
the dependencies are met. And logging is nice to have anyway.
This wouldn't give any slowdown, because all the logging is
silenced unless '--debug-cycles', plus no logging is done
from the speed critical code.
This is mainly to address old issue when one need to have SDL library installed
in order to use our official builds. Some hip distros already installs SDL,
but it's not quite the same across all the variety of the distros.
We also now switching to SDL-2.0, most of the distros have it in repositories
already, so it shouldn't be huge deal to install it if needed.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D878
Currently only summed number of traversal steps and intersections used by the
camera ray intersection pass is implemented, but in the future we will support
more debug passes which would help checking what things makes the scene slow.
Example of such extra passes could be number of bounces, time spent on the
shader tree evaluation and so.
Implementation from the Cycles side is pretty much straightforward, could only
mention here that it's a build-time option disabled by default.
From the blender side it's implemented as a PASS_DEBUG with several subtypes
possible. This way we don't need to create an extra DNA pass type for each of
the debug passes, saving us a bits.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D813
This commit makes it possible to use Glog library for the debug logging.
For now only possible when using CMake and in order to use the logging
the WITH_CYCLES_LOGGING configuration variable is to be enabled.
When this option is not enabled or when using Scons there's no difference
in Cycles behavior at all, when using logging and no output to the console
impact is gonna to be minimal.
This is done in order to make it possible to have debug logging persistent
in code (without need to add it when troubleshooting some bug and removing
it afterwards).
For now actual logging is not placed yet, only all the functions needed for
the logging are written and so.
Campbell Barton
Sergey Sharybin
Martijn Berger
Martijn Berger
Mike Erwin
Kévin Dietrich
Sybren A. Stüvel
Bastien Montagne
Antony Riakiotakis
Brecht Van Lommel
Martijn Berger
Brecht Van Lommel
Stephen Kelly
Thomas Beck
Jörg Müller
Martijn Berger
Thomas Dinges
Severin
Jens Verwiebe
Jason Wilkins