NOTE: this feature is not ready for user testing, and not yet enabled in daily
builds. It is being merged now for easier collaboration on development.
HIP is a heterogenous compute interface allowing C++ code to be executed on
GPUs similar to CUDA. It is intended to bring back AMD GPU rendering support
on Windows and Linux.
https://github.com/ROCm-Developer-Tools/HIP.
As of the time of writing, it should compile and run on Linux with existing
HIP compilers and driver runtimes. Publicly available compilers and drivers
for Windows will come later.
See task T91571 for more details on the current status and work remaining
to be done.
Credits:
Sayak Biswas (AMD)
Arya Rafii (AMD)
Brian Savery (AMD)
Differential Revision: https://developer.blender.org/D12578
This is an implementation of Enhanced Subpixel Morphological Antialiasing (SMAA)
The algorithm was proposed by:
Jorge Jimenez, Jose I. Echevarria, Tiago Sousa, Diego Gutierrez
This node provides only SMAA 1x mode, so the operation will be done with no spatial
multisampling nor temporal supersampling. See Patch for comparisons.
The existing AA operation seems to be used only for binary images by some other nodes.
Using SMAA for binary images needs no important parameter such as "threshold", so we
perhaps can switch the operation to SMAA, though that changes existing behavior.
Notes:
1. The program code assumes the screen coordinates are DirectX style that the
vertical direction is upside-down, so "top" and "bottom" actually represent bottom
and top, respectively.
Thanks for Habib Gahbiche (zazizizou) to polish and finalize this patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D2411
A collection of smaller changes that are required in the /blender/source files. A lot of them are also due to variable renaming.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3855
Draco is added as a library under extern/ and builds a shared library that is
installed into the Python site-packages. This is then loaded by the glTF add-on
to do mesh compression.
Differential Revision: https://developer.blender.org/D4501
* WITH_SYSTEM_OPENJPEG is removed and is now always on, this was already
the case for macOS and Windows.
* This should not break existing Linx builds. If there is no new enough
OpenJPEG installed, CMake will no find libopenjp2 and WITH_IMAGE_OPENJPEG
will be disabled.
* install_deps.sh was updated with new package names, since distributions
put this version in a new package.
Differential Revision: https://developer.blender.org/D3663
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
We've got quite comprehensive BMesh based implementation, which is way easier
for maintenance than abandoned Carve library.
After all the time BMesh implementation was working on the same level of
limitations about manifold meshes and touching edges than Carve. Is better
to focus on maintaining one boolean implementation now.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D3050
Deleting the old internal audaspace.
Major changes from there are:
- The whole library was refactored to use C++11.
- Many stability and performance improvements.
- Major Python API refactor:
- Most requested: Play self generated sounds using numpy arrays.
- For games: Sound list, random sounds and dynamic music.
- Writing sounds to files.
- Sequencing API.
- Opening sound devices, eg. Jack.
- Ability to choose different OpenAL devices in the user settings.
It is disabled by default, so should not affect existing configurations.
Main benefits of this goes as:
- Linux distros can use that to avoid libraries duplication and link
blender package against gflags package from the system.
- It it easier to test whether Blender works with updated version of
Gflags prior to re-bundling the library.
This will be used for calculating bezier curves from freehand drawing,
may be used for other areas too.
Original code from GraphicsGems, 1990 (FitCurve.c),
with updates from OpenToonz, under 3 clause BSD license.
with own minor modifications for integration with Blender:
- support adding extra custom-data.
- improved handle clamping.
D1751, remove this library since its quite a specific - only supports an older version of this codec.
Also ffmpeg has added support for recent versions of the codec.
The main purpose of such linking is to make Blender compatible with
NVidia's debuggers and profilers which are doing some LD_PRELOAD
magic to intercept some function calls. Such magic conflicts with
our CUDA wrangler magic and causes segmentation faults.
The option is disabled by default, so there's no affect on any of
artists.
In order to make Blender linked directly against CUDA library use
the WITH_CUDA_DYNLOAD CMake option (it's marked as advanced).
This commit contains all the remained parts needed for initial integration of
OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU
backends which works in the following way:
- When SubSurf modifier is the last in the modifiers stack then GPU pipeline
of OpenSubdiv is used, making viewport performance as fast as possible.
This also requires graphscard with GLSL 1.5 support. If this requirement is
not met, then no GPU pipeline is used at all.
- If SubSurf is not a last modifier or if DerivesMesh is being evaluated for
rendering then CPU limit evaluation API from OpenSubdiv is used. This only
replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG
structures exactly the same as they used to be for ages now.
This integration is fully covered with ifdef and not enabled by default
because there are several TODOs to be solved first:
- Face varying data interpolation is not really cleanly implemented for GPU
in OpenSubdiv 3.0. It is also not implemented for limit evaluation API.
This basically means we'll have really hard time supporting UVs.
- Limit evaluation only works with adaptivly subdivided meshes so far, which
basically means all the points of CCG are pushed to the limit. This gives
different result from old code.
- There are some serious optimizations possible on the topology refiner
creation, which would speed up initial OpenSubdiv mesh creation.
- There are some hardcoded asumptions in the GPU and DerivedMesh areas which
could be generalized.
That's something where Antony and Campbell can help, making it so the code
is structured in a way which is reusable by all planned viewport projects.
- There are also some workarounds in the dependency graph to make sure OpenGL
buffers are only freed from the main thread.
Those who'll be wanting to make experiments with this code should grab dev
branch (NOT master) from
https://github.com/Nazg-Gul/OpenSubdiv/tree/dev
There are some patches applied in there which we're working on on getting
into upstream.
Title says pretty much everything. For now, only thing available is a solver of eigen
values/vectors for self-adjoint matrices.
We can easily add more when needed.
Thanks to Sergey and Campbell for quick review.
This is mainly to address old issue when one need to have SDL library installed
in order to use our official builds. Some hip distros already installs SDL,
but it's not quite the same across all the variety of the distros.
We also now switching to SDL-2.0, most of the distros have it in repositories
already, so it shouldn't be huge deal to install it if needed.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D878
For now it was mainly about OpenCL wrangler being duplicated
between Cycles and Compositor, but with OpenSubdiv work those
wranglers were gonna to be duplicated just once again.
This commit makes it so Cycles and Compositor uses wranglers
from this repositories:
- https://github.com/CudaWrangler/cuew
- https://github.com/OpenCLWrangler/clew
This repositories are based on the wranglers we used before
and they'll be likely continued maintaining by us plus some
more players in the market.
Pretty much straightforward change with some tricks in the
CMake/SCons to make this libs being passed to the linker
after all other libraries in order to make OpenSubdiv linked
against those wranglers in the future.
For those who're worrying about Cycles being less standalone,
it's not truth, it's rather more flexible now and in the future
different wranglers might be used in Cycles. For now it'll
just mean those libs would need to be put into Cycles repository
together with some other libs from Blender such as mikkspace.
This is mainly platform maintenance commit, should not be any
changes to the user space.
Reviewers: juicyfruit, dingto, campbellbarton
Reviewed By: juicyfruit, dingto, campbellbarton
Differential Revision: https://developer.blender.org/D707
Makes code in tracking.cc much easier to understand and modify,
without worring to breck compulation with Libmv disabled.
It is still possible compilation will break due to libmv-capi
changes, but that's not happening so much often.
This patch allows Blender to display i18n monospace font in the text
editor and the Python interactive console. Wide characters that occupy
multiple columns such as CJK characters can be displayed correctly.
Furthermore, wrapping, selection, suggestion, cursor drawing, and
syntax highlighting should work.
Also fixes a bug [#34543]: In Text Editor false color in comment on cyrillic
To estimate how many columns each character occupies, this patch uses
wcwidth.c written by Markus Kuhn and distributed under MIT-style license:
http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c
wcwidth.c is stored in extern/wcwidth and used as a static library.
This patch adds new API to blenfont, blenlib and blenkernel:
BLF_get_unifont_mono()
BLF_free_unifont_mono()
BLF_draw_mono()
BLI_wcwidth()
BLI_wcswidth()
BLI_str_utf8_char_width()
BLI_str_utf8_char_width_safe()
txt_utf8_offset_to_column()
txt_utf8_column_to_offset()
Note: this doesn't work yet for everything with latest stable bullet (2.81), need to look into why and likely apply some patches upstream.
However I managed to link blender by disabling some features, likely it can be made to work without too much trouble.
RangeTree is a simple C++ tree set for storing non-overlapping scalar
ranges. Original source from:
https://github.com/nicholasbishop/RangeTree
Also update the build systems to include RangeTree.
Carve proved it's a way to go, so the time have came to get rid of old
boolean operation module which isn't used anymore.
Still kept BOP interface but move it to BSP module. At some point it
could be cleaned up further (like perhaps removed extra abstraction
level or so) but would be nice to combine such a refactor with making
BSP aware of NGons.
Tested on linux using both cmake and scons, possible regressions on
windows/osx. Would check windoes build just after commit.
Brian Savery
Campbell Barton
Habib Gahbiche
Sebastián Barschkis
Sebastian Parborg
Benjamin Schmithüsen
Brecht Van Lommel
Dalai Felinto
Sergey Sharybin
Jörg Müller
Bastien Montagne
Jason Wilkins
Irie Shinsuke
Nicholas Bishop