Calling operators in background-mode always printed with the
assumption that output should never be hidden.
However operators called from `bpy.ops` were also printing reports to
the `stdout` (needed for the Python console and generally useful).
Resolve by adding a flag to signal that the owner of the ReportList
is responsible for printing to the `stdout`.
This adds back the new mix node to the Color sections
of the add node menu.
The add menu now contains two entries for the mix node.
One under Utilites/Converter which defaults for float.
One under Color which defaults to color with `Mix Color` label.
This was moved as part of D13749.
The issue was reported on BlenderArtists.
Differential Revision: https://developer.blender.org/D15887
Some files have 2 different framerates stored in metadata. Use function
`av_guess_frame_rate` to get media FPS, because it provides more
consistent / correct values across multiple files.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15839
`MPoly` is used and copied in many places. To avoid the need to use a
special function for copying MPoly, or the need to add a copy
constructor, just rename the `mat_nr` field to include "legacy" in the
name. This keeps the original purpose of notifying developers that
the field shouldn't be used without any further complexity.
Apply the same fix to `bweight`.
Differential Revision: https://developer.blender.org/D15841
The trim functionality is implemented in the geometry module, and
generalized a bit to be potentially useful for bisecting in the future.
The implementation is based on a helper type called `IndexRangeCyclic`
which allows iteration over all control points between two points on a
curve.
Catmull Rom curves are now supported-- trimmed without resampling first.
However, maintaining the exact shape is not possible. NURBS splines are
still converted to polylines using the evaluated curve concept.
Performance is equivalent or faster then a 3.1 build with regards to
node timings. Compared to 3.3 and 3.2, it's easy to observe test cases
where the node is at least 3 or 4 times faster.
Differential Revision: https://developer.blender.org/D14481
The internal state tracking is not fully suited for such kind
of optimization yet.
It is probably not that much work to make them work, but the
issue caused by the changes is serious enough for the studio
so it feels better to revert changes for now and have a closer
look into remaining issues without pressure.
Caused by b5f7af31d6, which exposed the fact that the PBVH wasn't
retrieving the updated hide status attributes if they were allocated in
sculpt mode. Previously the attributes were always allocated when
entering sculpt mode.
Removes the "Edited Action" tab for selected Action strips in the NLA
editor. It is still available in the Action editor, where it is actually
suitable/usable. Having it in the NLA got in the way of the actual NLA
strip properties.
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D14964
On NVIDIA volumetric resolve failed for large production scenes.
The result would remove most color from the final render. The cause
seems to be a faulty driver.
This change ported the fragment shader to a compute shader which
would select a different compiler branch and didn't show the error.
Animators were not able to set channel interpolation or easing type for
channels visible in the dopesheet but hidden in the graph editor.
Bug seemed to be due to typo.
No official report, but there was a RCS on this
https://blender.community/c/rightclickselect/yWgbbc/
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D10228
Implement import & export support for "PBR extensions" in .mtl files
(T101029, also fixes T86736).
Newly supported parameters:
- Roughness (Pr, map_Pr)
- Metallic (Pm, map_Pm)
- Sheen (Ps, map_Ps)
- Clearcoat thickness (Pc) and roughness (Pcr)
- Anisotropy (aniso) and rotation (anisor)
- Transmittance (Tf / Kt)
Exporter has an option to enable these additional PBR parameters
export; defaults to off since not all software understands that.
Exporter UI tweaked and all material-related options were put into
their own separate box.
Added/extended test files in Subversion repository for test coverage.
This change adds cryptomatte render passes to EEVEE-Next. Due to the upcoming viewport
compositor we also improved cryptomatte so it will be real-time. This also allows viewing
the cryptomatte passes in the viewport directly.
{F13482749}
A surface shader would store any active cryptomatte layer to a texture. Object hash is stored
as R, Asset hash as G and Material hash as B. Hashes are only calculated when the cryptomatte
layer is active to reduce any unneeded work.
During film accumulation the hashes are separated and stored in a texture array that matches
the cryptomatte standard. For the real-time use case sorting is skipped. For final rendering
the samples are sorted and normalized.
NOTE: Eventually we should also do sample normalization in the viewport in order to extract the correct
mask when using the viewport compositor.
Reviewed By: fclem
Maniphest Tasks: T99390
Differential Revision: https://developer.blender.org/D15753
A regression since ac20970bc2
The issue was caused by depsgraph clearing all id->recalc flags
wrongly assuming that all IDs are fully evaluated.
This change makes it so the depsgraph becomes aware of possibly
incompletely evaluated IDs.
Differential Revision: https://developer.blender.org/D15946
Cleans up the file structure to be more similar to that of the SVM
and also makes it possible to build kernels with OSL support, but
without having to include SVM support.
This patch was split from D15902.
Differential Revision: https://developer.blender.org/D15949
Additionally, just stick to a pure error stating. Such messages
are aimed for developers and it is rather implied that oneAPI
rendering will be disabled.
A continuation of previous fix for malloc hooks which got removed
from the new glibc library.
The pre-compiled jemalloc has definitions which interpose hooks
in glibc leading to linking errors with multiple hook definitions.
A simple fix is to skip doing the workaround when using jemalloc
from pre-compiled libraries.
This will likely be revisited in the future, but for now it is
important to fix compilation errors for developers.
This refactors the geometry nodes evaluation system. No changes for the
user are expected. At a high level the goals are:
* Support using geometry nodes outside of the geometry nodes modifier.
* Support using the evaluator infrastructure for other purposes like field evaluation.
* Support more nodes, especially when many of them are disabled behind switch nodes.
* Support doing preprocessing on node groups.
For more details see T98492.
There are fairly detailed comments in the code, but here is a high level overview
for how it works now:
* There is a new "lazy-function" system. It is similar in spirit to the multi-function
system but with different goals. Instead of optimizing throughput for highly
parallelizable work, this system is designed to compute only the data that is actually
necessary. What data is necessary can be determined dynamically during evaluation.
Many lazy-functions can be composed in a graph to form a new lazy-function, which can
again be used in a graph etc.
* Each geometry node group is converted into a lazy-function graph prior to evaluation.
To evaluate geometry nodes, one then just has to evaluate that graph. Node groups are
no longer inlined into their parents.
Next steps for the evaluation system is to reduce the use of threads in some situations
to avoid overhead. Many small node groups don't benefit from multi-threading at all.
This is much easier to do now because not everything has to be inlined in one huge
node tree anymore.
Differential Revision: https://developer.blender.org/D15914
Since this was added, Linux libraries have been included in `../lib/`.
This made `make bpy` on Linux install the `bpy` module into the bundled
SVN libraries which isn't very useful.
Now leave WITH_INSTALL_PORTABLE unset (defaulting to ON).
Python developers may reference their systems Python and disable the
option if they wish for a system-wide module installation.
As portable is already the default, setting it meant using the lite
configuration would always reset the value if was intentionally changed.
This was also inconsistent as other configurations left this unset.
This was a kind of "lite" target, disabling options such as FFMPEG and
ALEMBIC which may be useful to read/write data from the Python module.
Now fewer options have been changed.
The following options are now disabled:
- Audio support (to prevent audio devices being initialized on startup).
- Input device support such as NDOF and IME as there is no GUI.
- Blender thumbnail extraction as it's not installed as part of
the Python module.
Instead of attempting to predict what is useful to enable when building
as a Python module, developers can mix combine options e.g.
"make bpy release" or "make bpy lite".
This makes the NLA_OT_actionclip_add operation (Shift+A while mousing
over the NLA strips area) fail on invocation if no tracks are active.
This stops the annoyance of using the Shift+A menu to select an action
to add, but only getting the error after you select an action.
Differential Revision: https://developer.blender.org/D15737
The pre-processor blocks contained un-balanced braces, causing a syntax
error when building with WAYLAND but not X11.
Use the same number of opening & closing braces in each pre-processor
block so changes aren't as likely to break other platforms.
Also assert when unexpected states are reached.
Fix error and warnings introduced in commit 8851790dd7. Include
unistd.h for close() on Non-Windows OSs. Calm warnings about unused
argument. Return full size of image file to caller.
Own Code.
Thumbnail WebP images quicker while using much less RAM.
See D15908 for more details.
Differential Revision: https://developer.blender.org/D15908
Reviewed by Brecht Van Lommel
When there was only a single material assigned to the mesh, the material
index attribute didn't necessarily exist. Changing the oder of the slots
wouldn't change the first material index as necessary.