Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
/*
|
|
|
|
* ***** BEGIN GPL LICENSE BLOCK *****
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
* of the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
|
|
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
|
|
*
|
|
|
|
* The Original Code is Copyright (C) 2012 by Blender Foundation.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* The Original Code is: all of this file.
|
|
|
|
*
|
|
|
|
* Contributor(s): Xavier Thomas,
|
|
|
|
* Lukas Toenne,
|
|
|
|
* Sergey Sharybin
|
|
|
|
*
|
|
|
|
* ***** END GPL LICENSE BLOCK *****
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
2013-04-04 04:05:11 +02:00
|
|
|
#ifndef __IMB_COLORMANAGEMENT_H__
|
|
|
|
#define __IMB_COLORMANAGEMENT_H__
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
|
2013-09-12 05:02:50 +02:00
|
|
|
/** \file blender/imbuf/IMB_colormanagement.h
|
|
|
|
* \ingroup imbuf
|
|
|
|
*/
|
|
|
|
|
2013-09-05 19:13:43 +02:00
|
|
|
#include "BLI_sys_types.h"
|
|
|
|
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
#define BCM_CONFIG_FILE "config.ocio"
|
|
|
|
|
|
|
|
struct bContext;
|
|
|
|
struct ColorManagedColorspaceSettings;
|
|
|
|
struct ColorManagedDisplaySettings;
|
|
|
|
struct ColorManagedViewSettings;
|
|
|
|
struct ColormanageProcessor;
|
|
|
|
struct EnumPropertyItem;
|
|
|
|
struct ImBuf;
|
|
|
|
struct Main;
|
2012-09-24 13:56:07 +02:00
|
|
|
struct ImageFormatData;
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
|
|
|
|
struct ColorSpace;
|
|
|
|
struct ColorManagedDisplay;
|
|
|
|
|
|
|
|
/* ** Generic functions ** */
|
|
|
|
|
|
|
|
void IMB_colormanagement_check_file_config(struct Main *bmain);
|
|
|
|
|
|
|
|
void IMB_colormanagement_validate_settings(struct ColorManagedDisplaySettings *display_settings,
|
|
|
|
struct ColorManagedViewSettings *view_settings);
|
|
|
|
|
|
|
|
const char *IMB_colormanagement_role_colorspace_name_get(int role);
|
2012-09-25 10:42:24 +02:00
|
|
|
void IMB_colormanagement_check_is_data(struct ImBuf *ibuf, const char *name);
|
2012-09-25 12:21:51 +02:00
|
|
|
void IMB_colormanagement_assign_float_colorspace(struct ImBuf *ibuf, const char *name);
|
2012-09-21 22:44:41 +02:00
|
|
|
void IMB_colormanagement_assign_rect_colorspace(struct ImBuf *ibuf, const char *name);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
|
2013-09-02 15:54:12 +02:00
|
|
|
const char *IMB_colormanagement_get_float_colorspace(struct ImBuf *ibuf);
|
|
|
|
const char *IMB_colormanagement_get_rect_colorspace(struct ImBuf *ibuf);
|
|
|
|
|
2015-03-17 15:20:33 +01:00
|
|
|
float IMB_colormanagement_get_luminance(const float rgb[3]);
|
|
|
|
unsigned char IMB_colormanagement_get_luminance_byte(const unsigned char[3]);
|
|
|
|
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
/* ** Color space transformation functions ** */
|
|
|
|
void IMB_colormanagement_transform(float *buffer, int width, int height, int channels,
|
2013-09-05 19:13:43 +02:00
|
|
|
const char *from_colorspace, const char *to_colorspace, bool predivide);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
void IMB_colormanagement_transform_threaded(float *buffer, int width, int height, int channels,
|
2013-09-05 19:13:43 +02:00
|
|
|
const char *from_colorspace, const char *to_colorspace, bool predivide);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
void IMB_colormanagement_transform_v4(float pixel[4], const char *from_colorspace, const char *to_colorspace);
|
|
|
|
|
|
|
|
void IMB_colormanagement_colorspace_to_scene_linear_v3(float pixel[3], struct ColorSpace *colorspace);
|
2013-09-05 19:13:43 +02:00
|
|
|
void IMB_colormanagement_colorspace_to_scene_linear_v4(float pixel[4], bool predivide, struct ColorSpace *colorspace);
|
2013-03-18 12:34:05 +01:00
|
|
|
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
void IMB_colormanagement_scene_linear_to_colorspace_v3(float pixel[3], struct ColorSpace *colorspace);
|
|
|
|
|
2013-09-05 19:13:43 +02:00
|
|
|
void IMB_colormanagement_colorspace_to_scene_linear(float *buffer, int width, int height, int channels, struct ColorSpace *colorspace, bool predivide);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
|
|
|
|
void IMB_colormanagement_scene_linear_to_display_v3(float pixel[3], struct ColorManagedDisplay *display);
|
|
|
|
void IMB_colormanagement_display_to_scene_linear_v3(float pixel[3], struct ColorManagedDisplay *display);
|
|
|
|
|
|
|
|
void IMB_colormanagement_pixel_to_display_space_v4(float result[4], const float pixel[4], const struct ColorManagedViewSettings *view_settings,
|
|
|
|
const struct ColorManagedDisplaySettings *display_settings);
|
|
|
|
|
|
|
|
void IMB_colormanagement_pixel_to_display_space_v3(float result[3], const float pixel[3], const struct ColorManagedViewSettings *view_settings,
|
|
|
|
const struct ColorManagedDisplaySettings *display_settings);
|
|
|
|
|
|
|
|
void IMB_colormanagement_imbuf_make_display_space(struct ImBuf *ibuf, const struct ColorManagedViewSettings *view_settings,
|
|
|
|
const struct ColorManagedDisplaySettings *display_settings);
|
|
|
|
|
2013-09-05 19:13:43 +02:00
|
|
|
struct ImBuf *IMB_colormanagement_imbuf_for_write(struct ImBuf *ibuf, bool save_as_render, bool allocate_result,
|
2012-09-24 13:56:07 +02:00
|
|
|
const struct ColorManagedViewSettings *view_settings,
|
|
|
|
const struct ColorManagedDisplaySettings *display_settings,
|
|
|
|
struct ImageFormatData *image_format_data);
|
|
|
|
|
2013-05-12 21:01:23 +02:00
|
|
|
void IMB_colormanagement_buffer_make_display_space(float *buffer, unsigned char *display_buffer,
|
|
|
|
int width, int height, int channels, float dither,
|
|
|
|
const struct ColorManagedViewSettings *view_settings,
|
|
|
|
const struct ColorManagedDisplaySettings *display_settings);
|
|
|
|
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
/* ** Public display buffers interfaces ** */
|
|
|
|
|
2013-04-04 14:20:13 +02:00
|
|
|
void IMB_colormanagement_display_settings_from_ctx(const struct bContext *C,
|
|
|
|
struct ColorManagedViewSettings **view_settings_r,
|
|
|
|
struct ColorManagedDisplaySettings **display_settings_r);
|
|
|
|
|
2014-01-01 11:59:38 +01:00
|
|
|
const char *IMB_colormanagement_get_display_colorspace_name(const struct ColorManagedViewSettings *view_settings,
|
|
|
|
const struct ColorManagedDisplaySettings *display_settings);
|
|
|
|
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
unsigned char *IMB_display_buffer_acquire(struct ImBuf *ibuf, const struct ColorManagedViewSettings *view_settings,
|
|
|
|
const struct ColorManagedDisplaySettings *display_settings, void **cache_handle);
|
|
|
|
unsigned char *IMB_display_buffer_acquire_ctx(const struct bContext *C, struct ImBuf *ibuf, void **cache_handle);
|
|
|
|
|
|
|
|
void IMB_display_buffer_transform_apply(unsigned char *display_buffer, float *linear_buffer, int width, int height,
|
|
|
|
int channels, const struct ColorManagedViewSettings *view_settings,
|
2013-09-05 19:13:43 +02:00
|
|
|
const struct ColorManagedDisplaySettings *display_settings, bool predivide);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
|
|
|
|
void IMB_display_buffer_release(void *cache_handle);
|
|
|
|
|
|
|
|
/* ** Display funcrions ** */
|
|
|
|
int IMB_colormanagement_display_get_named_index(const char *name);
|
|
|
|
const char *IMB_colormanagement_display_get_indexed_name(int index);
|
|
|
|
const char *IMB_colormanagement_display_get_default_name(void);
|
|
|
|
struct ColorManagedDisplay *IMB_colormanagement_display_get_named(const char *name);
|
2012-09-26 15:17:47 +02:00
|
|
|
const char *IMB_colormanagement_display_get_none_name(void);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
|
|
|
|
/* ** View funcrions ** */
|
|
|
|
int IMB_colormanagement_view_get_named_index(const char *name);
|
|
|
|
const char *IMB_colormanagement_view_get_indexed_name(int index);
|
|
|
|
|
2013-09-09 11:48:26 +02:00
|
|
|
/* ** Look funcrions ** */
|
|
|
|
int IMB_colormanagement_look_get_named_index(const char *name);
|
|
|
|
const char *IMB_colormanagement_look_get_indexed_name(int index);
|
|
|
|
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
/* ** Color space functions ** */
|
|
|
|
int IMB_colormanagement_colorspace_get_named_index(const char *name);
|
|
|
|
const char *IMB_colormanagement_colorspace_get_indexed_name(int index);
|
|
|
|
const char *IMB_colormanagement_view_get_default_name(const char *display_name);
|
|
|
|
|
|
|
|
void IMB_colormanagment_colorspace_from_ibuf_ftype(struct ColorManagedColorspaceSettings *colorspace_settings, struct ImBuf *ibuf);
|
|
|
|
|
|
|
|
/* ** RNA helper functions ** */
|
|
|
|
void IMB_colormanagement_display_items_add(struct EnumPropertyItem **items, int *totitem);
|
|
|
|
void IMB_colormanagement_view_items_add(struct EnumPropertyItem **items, int *totitem, const char *display_name);
|
2013-09-09 11:48:26 +02:00
|
|
|
void IMB_colormanagement_look_items_add(struct EnumPropertyItem **items, int *totitem);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
void IMB_colormanagement_colorspace_items_add(struct EnumPropertyItem **items, int *totitem);
|
|
|
|
|
|
|
|
/* ** Tile-based buffer management ** */
|
|
|
|
void IMB_partial_display_buffer_update(struct ImBuf *ibuf, const float *linear_buffer, const unsigned char *buffer_byte,
|
2014-01-01 11:59:38 +01:00
|
|
|
int stride, int offset_x, int offset_y,
|
|
|
|
const struct ColorManagedViewSettings *view_settings,
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
const struct ColorManagedDisplaySettings *display_settings,
|
2014-01-01 11:59:38 +01:00
|
|
|
int xmin, int ymin, int xmax, int ymax,
|
|
|
|
bool copy_display_to_byte_buffer);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
|
2013-02-11 14:24:35 +01:00
|
|
|
void IMB_partial_display_buffer_update_delayed(struct ImBuf *ibuf, int xmin, int ymin, int xmax, int ymax);
|
|
|
|
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
/* ** Pixel processor functions ** */
|
|
|
|
struct ColormanageProcessor *IMB_colormanagement_display_processor_new(const struct ColorManagedViewSettings *view_settings,
|
|
|
|
const struct ColorManagedDisplaySettings *display_settings);
|
|
|
|
struct ColormanageProcessor *IMB_colormanagement_colorspace_processor_new(const char *from_colorspace, const char *to_colorspace);
|
|
|
|
void IMB_colormanagement_processor_apply_v4(struct ColormanageProcessor *cm_processor, float pixel[4]);
|
2012-12-31 14:52:13 +01:00
|
|
|
void IMB_colormanagement_processor_apply_v4_predivide(struct ColormanageProcessor *cm_processor, float pixel[4]);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
void IMB_colormanagement_processor_apply_v3(struct ColormanageProcessor *cm_processor, float pixel[3]);
|
2013-12-18 10:51:09 +01:00
|
|
|
void IMB_colormanagement_processor_apply_pixel(struct ColormanageProcessor *cm_processor, float *pixel, int channels);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
void IMB_colormanagement_processor_apply(struct ColormanageProcessor *cm_processor, float *buffer, int width, int height,
|
2013-09-05 19:13:43 +02:00
|
|
|
int channels, bool predivide);
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
void IMB_colormanagement_processor_free(struct ColormanageProcessor *cm_processor);
|
|
|
|
|
2013-03-29 17:02:27 +01:00
|
|
|
/* ** OpenGL drawing routines using GLSL for color space transform ** */
|
|
|
|
|
2013-08-31 01:49:35 +02:00
|
|
|
/* Test if GLSL drawing is supported for combination of graphics card and this configuration */
|
2013-10-09 17:57:32 +02:00
|
|
|
bool IMB_colormanagement_support_glsl_draw(const struct ColorManagedViewSettings *view_settings);
|
2013-04-02 19:28:37 +02:00
|
|
|
/* Configures GLSL shader for conversion from scene linear to display space */
|
2013-09-05 19:13:43 +02:00
|
|
|
bool IMB_colormanagement_setup_glsl_draw(const struct ColorManagedViewSettings *view_settings,
|
|
|
|
const struct ColorManagedDisplaySettings *display_settings,
|
2013-12-13 07:36:45 +01:00
|
|
|
float dither, bool predivide);
|
Bunch of fixes for GLSL display transform
- GLSL shader wasn't aware of alpha predivide option,
always assuming alpha is straight. Gave wrong results
when displaying transparent float buffers.
- GLSL display wasn't aware of float buffers with number
of channels different from 4, crashing when trying to
display image with different number of channels.
This required a bit larger changes, namely now it's
possible to pass format (GL_RGB, GL_RGBAm GL_LUMINANCE)
to glaDrawPixelsTex, This also implied adding format to
glaDrawPixelsAuto and modifying all places where this
functions are called.
Now GLSL will handle both 3 and 4 channels buffers,
single channel images are handled by CPU.
- Replaced hack for render result displaying with a bit
different hack.
Namely CPU conversion will happen only during render,
once render is done GLSL would be used for displaying
render result on a screen.
This is so because of the way renderer updates parts
of the image -- it happens without respect to active
render layer in image user. This is harmless because
only display buffer is modifying, but this is tricky
because we don't have original buffer opened during
rendering.
One more related fix here was about when rendering
multiple layers, wrong image would be displaying when
rendering is done. Added a signal to invalidate
display buffer once rendering is done (only happens
when using multiple layers). This solves issue with
wrong buffer stuck on the display when using regular
CPU display space transform and if GLSL is available
it'll make image displayed with a GLSL shader.
- As an additional change, byte buffers now also uses
GLSL display transform.
So now only dutehr and RGB curves are stoppers for
using GLSL for all kind of display transforms.
2013-04-03 17:59:54 +02:00
|
|
|
/* Same as above, but display space conversion happens from a specified space */
|
2013-09-05 19:13:43 +02:00
|
|
|
bool IMB_colormanagement_setup_glsl_draw_from_space(const struct ColorManagedViewSettings *view_settings,
|
|
|
|
const struct ColorManagedDisplaySettings *display_settings,
|
|
|
|
struct ColorSpace *colorspace,
|
2013-12-13 07:36:45 +01:00
|
|
|
float dither, bool predivide);
|
Bunch of fixes for GLSL display transform
- GLSL shader wasn't aware of alpha predivide option,
always assuming alpha is straight. Gave wrong results
when displaying transparent float buffers.
- GLSL display wasn't aware of float buffers with number
of channels different from 4, crashing when trying to
display image with different number of channels.
This required a bit larger changes, namely now it's
possible to pass format (GL_RGB, GL_RGBAm GL_LUMINANCE)
to glaDrawPixelsTex, This also implied adding format to
glaDrawPixelsAuto and modifying all places where this
functions are called.
Now GLSL will handle both 3 and 4 channels buffers,
single channel images are handled by CPU.
- Replaced hack for render result displaying with a bit
different hack.
Namely CPU conversion will happen only during render,
once render is done GLSL would be used for displaying
render result on a screen.
This is so because of the way renderer updates parts
of the image -- it happens without respect to active
render layer in image user. This is harmless because
only display buffer is modifying, but this is tricky
because we don't have original buffer opened during
rendering.
One more related fix here was about when rendering
multiple layers, wrong image would be displaying when
rendering is done. Added a signal to invalidate
display buffer once rendering is done (only happens
when using multiple layers). This solves issue with
wrong buffer stuck on the display when using regular
CPU display space transform and if GLSL is available
it'll make image displayed with a GLSL shader.
- As an additional change, byte buffers now also uses
GLSL display transform.
So now only dutehr and RGB curves are stoppers for
using GLSL for all kind of display transforms.
2013-04-03 17:59:54 +02:00
|
|
|
/* Same as setup_glsl_draw, but color management settings are guessing from a given context */
|
2013-12-13 07:36:45 +01:00
|
|
|
bool IMB_colormanagement_setup_glsl_draw_ctx(const struct bContext *C, float dither, bool predivide);
|
Bunch of fixes for GLSL display transform
- GLSL shader wasn't aware of alpha predivide option,
always assuming alpha is straight. Gave wrong results
when displaying transparent float buffers.
- GLSL display wasn't aware of float buffers with number
of channels different from 4, crashing when trying to
display image with different number of channels.
This required a bit larger changes, namely now it's
possible to pass format (GL_RGB, GL_RGBAm GL_LUMINANCE)
to glaDrawPixelsTex, This also implied adding format to
glaDrawPixelsAuto and modifying all places where this
functions are called.
Now GLSL will handle both 3 and 4 channels buffers,
single channel images are handled by CPU.
- Replaced hack for render result displaying with a bit
different hack.
Namely CPU conversion will happen only during render,
once render is done GLSL would be used for displaying
render result on a screen.
This is so because of the way renderer updates parts
of the image -- it happens without respect to active
render layer in image user. This is harmless because
only display buffer is modifying, but this is tricky
because we don't have original buffer opened during
rendering.
One more related fix here was about when rendering
multiple layers, wrong image would be displaying when
rendering is done. Added a signal to invalidate
display buffer once rendering is done (only happens
when using multiple layers). This solves issue with
wrong buffer stuck on the display when using regular
CPU display space transform and if GLSL is available
it'll make image displayed with a GLSL shader.
- As an additional change, byte buffers now also uses
GLSL display transform.
So now only dutehr and RGB curves are stoppers for
using GLSL for all kind of display transforms.
2013-04-03 17:59:54 +02:00
|
|
|
/* Same as setup_glsl_draw_from_space, but color management settings are guessing from a given context */
|
2013-12-13 07:36:45 +01:00
|
|
|
bool IMB_colormanagement_setup_glsl_draw_from_space_ctx(const struct bContext *C, struct ColorSpace *colorspace,
|
|
|
|
float dither, bool predivide);
|
2013-04-02 19:28:37 +02:00
|
|
|
/* Finish GLSL-based display space conversion */
|
|
|
|
void IMB_colormanagement_finish_glsl_draw(void);
|
|
|
|
|
Color Management, Stage 2: Switch color pipeline to use OpenColorIO
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
2012-09-15 12:05:07 +02:00
|
|
|
/* Roles */
|
|
|
|
enum {
|
|
|
|
COLOR_ROLE_SCENE_LINEAR = 0,
|
|
|
|
COLOR_ROLE_COLOR_PICKING,
|
|
|
|
COLOR_ROLE_TEXTURE_PAINTING,
|
|
|
|
COLOR_ROLE_DEFAULT_SEQUENCER,
|
|
|
|
COLOR_ROLE_DEFAULT_BYTE,
|
|
|
|
COLOR_ROLE_DEFAULT_FLOAT,
|
|
|
|
};
|
|
|
|
|
2013-04-04 04:05:11 +02:00
|
|
|
#endif /* __IMB_COLORMANAGEMENT_H__ */
|