tmaq
/
tornavis
1
0
Fork 0
Code Issues 2 Pull Requests 29 Packages Projects 24 Releases Wiki Activity
tornavis/CMakeLists.txt

3138 lines
108 KiB
CMake
Raw Normal View History

Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-17 00:40:48 +02:00
# ***** BEGIN GPL LICENSE BLOCK *****
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-17 00:40:48 +02:00
# of the License, or (at your option) any later version.
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
correct fsf address
2010-02-12 14:34:04 +01:00
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#
# The Original Code is Copyright (C) 2006, Blender Foundation
# All rights reserved.
#
# The Original Code is: all of this file.
#
# Contributor(s): Jacques Beaurain.
#
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-17 00:40:48 +02:00
# ***** END GPL LICENSE BLOCK *****
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
CMake: Give error on attempts to generate within the sources with instructions on how to do it out-of-source
2006-12-13 03:57:57 +01:00
#-----------------------------------------------------------------------------
formatting edits only
2011-09-30 17:51:58 +02:00
# We don't allow in-source builds. This causes no end of troubles because
# all out-of-source builds will use the CMakeCache.txt file there and even
set main() argv functions to be const char * also set minimum cmake version to 2.8
2011-02-19 13:05:20 +01:00
# build the libs and objects in it.
CMake: Give error on attempts to generate within the sources with instructions on how to do it out-of-source
2006-12-13 03:57:57 +01:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(${CMAKE_SOURCE_DIR} STREQUAL ${CMAKE_BINARY_DIR})
minor changes - remove some warnings - fix typos - cmake allow in-source build (when WITH_IN_SOURCE_BUILD is defined) - cmake, use an explicit list of rna files (don't glob)
2011-04-21 07:49:47 +02:00
if(NOT DEFINED WITH_IN_SOURCE_BUILD)
message(FATAL_ERROR
"CMake generation for blender is not allowed within the source directory!"
"\n Remove the CMakeCache.txt file and try again from another folder, e.g.:"
"\n "
"\n rm CMakeCache.txt"
"\n cd .."
"\n mkdir cmake-make"
"\n cd cmake-make"
"\n cmake ../blender"
"\n "
"\n Alternately define WITH_IN_SOURCE_BUILD to force this option (not recommended!)"
)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
CMake: Give error on attempts to generate within the sources with instructions on how to do it out-of-source
2006-12-13 03:57:57 +01:00
Revert "Increase CMake minimum version to 3.0" This reverts commit ff3cf93405e63fa367f64412bcfe96b382b24b38. Turns out distros only a year old still use CMake 2.8x
2015-11-09 16:52:29 +01:00
cmake_minimum_required(VERSION 2.8)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
if(NOT EXECUTABLE_OUTPUT_PATH)
CMake: use functions instead of macros Reduces issues with vars leaking into the parent scope.
2015-06-17 01:16:17 +02:00
set(FIRST_RUN TRUE)
else()
set(FIRST_RUN FALSE)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
endif()
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-06 01:31:01 +02:00
# this starts out unset
fix [#27681] Python: crash assigning a 'set' to an array
2011-06-17 04:22:38 +02:00
list(APPEND CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}/build_files/cmake/Modules")
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-06 01:31:01 +02:00
initialize cmake's CMAKE_BUILD_TYPE to 'Release' add reference to cmake cache for convenience GNUMakefile
2011-06-27 15:18:08 +02:00
# avoid having empty buildtype
set(CMAKE_BUILD_TYPE_INIT "Release")
minor changes to cmake, main noticable change is to disable RULE_MESSAGES which gives less output with makefiles (easier to spot warnings).
2010-06-07 16:28:37 +02:00
# quiet output for Makefiles, 'make -s' helps too
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
# set_property(GLOBAL PROPERTY RULE_MESSAGES OFF)
minor changes to cmake, main noticable change is to disable RULE_MESSAGES which gives less output with makefiles (easier to spot warnings).
2010-06-07 16:28:37 +02:00
cmake - set configuration specific defines globally rather than mixing in with c/cxx flags
2011-10-26 02:51:29 +02:00
# global compile definitions since add_definitions() adds for all.
CMake: remove setting of policy CMP0043 to OLD. CMake 3.0 ignores the suffixed COMPILE_DEFINITIONS_<CONFIG> variants if policy CMP0043 is NEW, preferring instead to consume the unsuffixed COMPILE_DEFINITONS property and evaluate generator expressions in it. Setting the policy to OLD causes CMake 3.0 to not ignore those properties. Use the suffixed properties for compatibility only for CMake versions older than 3.0 using an explicit version check. Use the non-suffixed property with generator expressions otherwise. These definitions should mostly not be needed at all - CMake already sets NDEBUG in suffixed CMAKE_CXX_FLAGS_<CONFIG> variables. The _DEBUG macro is non-standard, but is used in several places in blender (usually in an OR combination with the DEBUG macro). Additionally, blender overwrites (instead of appending to) the CMAKE_CXX_FLAGS_<CONFIG> variables on WIN32. Rather than try to fundamentally change how debug-macros are handled in blender, change the buildsystem to keep the same behavior without requiring the CMP0043 policy set to OLD.
2015-11-09 20:30:26 +01:00
if(NOT (${CMAKE_VERSION} VERSION_LESS 3.0))
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS
$<$<CONFIG:Debug>:DEBUG;_DEBUG>
$<$<CONFIG:Release>:NDEBUG>
$<$<CONFIG:MinSizeRel>:NDEBUG>
$<$<CONFIG:RelWithDebInfo>:NDEBUG>
)
else()
# keep until CMake-3.0 is min requirement
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_DEBUG DEBUG _DEBUG)
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELEASE NDEBUG)
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_MINSIZEREL NDEBUG)
set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS_RELWITHDEBINFO NDEBUG)
endif()
cmake - set configuration specific defines globally rather than mixing in with c/cxx flags
2011-10-26 02:51:29 +02:00
buildinfo is now quoted from the build systems, avoids stripping quotes on startup. tested with linux/cmake linux/scons windows/cmake/mingw windows/cmake/msvc
2011-08-22 14:24:14 +02:00
#-----------------------------------------------------------------------------
# Set policy
Revert "Increase CMake minimum version to 3.0" This reverts commit ff3cf93405e63fa367f64412bcfe96b382b24b38. Turns out distros only a year old still use CMake 2.8x
2015-11-09 16:52:29 +01:00
# see "cmake --help-policy CMP0003"
# So library linking is more sane
cmake_policy(SET CMP0003 NEW)
# So BUILDINFO and BLENDERPATH strings are automatically quoted
cmake_policy(SET CMP0005 NEW)
# So syntax problems are errors
cmake_policy(SET CMP0010 NEW)
# Input directories must have CMakeLists.txt
cmake_policy(SET CMP0014 NEW)
buildinfo is now quoted from the build systems, avoids stripping quotes on startup. tested with linux/cmake linux/scons windows/cmake/mingw windows/cmake/msvc
2011-08-22 14:24:14 +02:00
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 16:56:14 +02:00
#-----------------------------------------------------------------------------
# Load some macros.
include(build_files/cmake/macros.cmake)
change in how cmake works with CMAKE_C_STANDARD_LIBRARIES / CMAKE_CXX_STANDARD_LIBRARIES. if not defined (first run) these are now set blank but can be defined later. the problem is that scons & cmake builds would link against different libraries since cmake added its own defaults. now, by default, scons & cmake have the same libraries. This fixes an obscure crash in MinGW where cmakes default linking with -ladvapi32 would crash on string formatting which used float precision as an argument, eg: printf("%.*f", 3, value); ...without giving a useful backtrace or pointing to the line of code doing the string formatting.
2011-04-09 13:16:37 +02:00
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 16:56:14 +02:00
#-----------------------------------------------------------------------------
# Initialize project.
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 16:56:14 +02:00
blender_project_hack_pre()
change in how cmake works with CMAKE_C_STANDARD_LIBRARIES / CMAKE_CXX_STANDARD_LIBRARIES. if not defined (first run) these are now set blank but can be defined later. the problem is that scons & cmake builds would link against different libraries since cmake added its own defaults. now, by default, scons & cmake have the same libraries. This fixes an obscure crash in MinGW where cmakes default linking with -ladvapi32 would crash on string formatting which used float precision as an argument, eg: printf("%.*f", 3, value); ...without giving a useful backtrace or pointing to the line of code doing the string formatting.
2011-04-09 13:16:37 +02:00
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 16:56:14 +02:00
project(Blender)
change in how cmake works with CMAKE_C_STANDARD_LIBRARIES / CMAKE_CXX_STANDARD_LIBRARIES. if not defined (first run) these are now set blank but can be defined later. the problem is that scons & cmake builds would link against different libraries since cmake added its own defaults. now, by default, scons & cmake have the same libraries. This fixes an obscure crash in MinGW where cmakes default linking with -ladvapi32 would crash on string formatting which used float precision as an argument, eg: printf("%.*f", 3, value); ...without giving a useful backtrace or pointing to the line of code doing the string formatting.
2011-04-09 13:16:37 +02:00
CMake changes - don't allow building if the LIBDIR is not found on mac/windows. - by default use -O2 rather then -O3 for GCC release flags, was crashing some GCC versions and blender releases are supposed to use -O2.
2011-05-23 16:56:14 +02:00
blender_project_hack_post()
change in how cmake works with CMAKE_C_STANDARD_LIBRARIES / CMAKE_CXX_STANDARD_LIBRARIES. if not defined (first run) these are now set blank but can be defined later. the problem is that scons & cmake builds would link against different libraries since cmake added its own defaults. now, by default, scons & cmake have the same libraries. This fixes an obscure crash in MinGW where cmakes default linking with -ladvapi32 would crash on string formatting which used float precision as an argument, eg: printf("%.*f", 3, value); ...without giving a useful backtrace or pointing to the line of code doing the string formatting.
2011-04-09 13:16:37 +02:00
import/export automated testing using CMake's CTest Will need to write full docs on this on the wiki. basic info. - 21 tests, OBJ/3DS/X3D/FBX, 3 tests per format import export. STL, PLY, BVH are TODO. - uses files in ../lib/tests (checkout separate) - run with CMake Makefiles "make test" or "ctest" - currently checks against basic MD5 hash on scene import and file MD5 hash on export (realize this wont work predictably on binary formats *TODO*). - currently uses a generic script for all tests with arguments to specify command to run, expected output, testing method, files to check against etc. Has already proved useful, found a number of bugs in import export and some in blender too.
2011-01-21 01:06:30 +01:00
enable_testing()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#-----------------------------------------------------------------------------
# Redirect output files
style cleanup: whitespace/indentation
2012-05-19 15:55:54 +02:00
set(EXECUTABLE_OUTPUT_PATH ${CMAKE_BINARY_DIR}/bin CACHE INTERNAL "" FORCE)
set(LIBRARY_OUTPUT_PATH ${CMAKE_BINARY_DIR}/lib CACHE INTERNAL "" FORCE)
GTest unit testing framework Currently covers only small set of functionality.
2014-06-18 14:49:17 +02:00
set(TESTS_OUTPUT_DIR ${EXECUTABLE_OUTPUT_PATH}/tests CACHE INTERNAL "" FORCE)
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#-----------------------------------------------------------------------------
# Set default config options
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
get_blender_version()
CMake patch from Ralf Hölzemer (cheleb) [#22849] Fix cmake install target on linux --- from the tracker --- This patch fixes the install target for the linux platform. Since the new configuration path changes are in effect, files have to be installed in the correct places instead of just copying the local installation to $PREFIX/share/blender. It also provides a new macro to determine the correct blender version values. Changes in this patch include: - the .desktop menu file is installed in $PREFIX/share/applications and points to the svg icon instead of a png one, which is also installed in $PREFIX/share/pixmaps - docs are installed in $PREFIX/share/doc/blender - scripts are installed in in $PREFIX/share/blender/x.xx/ - locales are installed in in $PREFIX/share/blender/x.xx/datafiles - a new cmake macro determines and sets the correct values for BLENDER_VERSION_MAJOR, BLENDER_VERSION_MINOR, BLENDER_SUBVERSION, BLENDER_VERSION, BLENDER_MINVERSION_MAJOR, BLENDER_MINVERSION_MINOR, BLENDER_MINSUBVERSION and BLENDER_MINVERSION by parsing source/blender/blenkernel/BKE_blender.h and calculating major/minor values. This replaces the hardcoded value in the top CMakeLists file and is used by all platforms.
2010-07-14 22:26:46 +02:00
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
#-----------------------------------------------------------------------------
# Platform Specific Defaults
# list of var-names
set(_init_vars)
# initialize to ON
macro(option_defaults_init)
foreach(_var ${ARGV})
set(${_var} ON)
list(APPEND _init_vars "${_var}")
endforeach()
CMake: use functions instead of macros Reduces issues with vars leaking into the parent scope.
2015-06-17 01:16:17 +02:00
unset(_var)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
endmacro()
# remove from namespace
macro(option_defaults_clear)
foreach(_var ${_init_vars})
unset(${_var})
endforeach()
unset(_var)
unset(_init_vars)
endmacro()
# values to initialize WITH_****
option_defaults_init(
_init_BUILDINFO
_init_CODEC_FFMPEG
_init_CYCLES_OSL
_init_IMAGE_OPENEXR
_init_INPUT_NDOF
_init_JACK
_init_OPENCOLLADA
_init_OPENCOLORIO
_init_SDL
_init_FFTW3
_init_GAMEENGINE
OpenSubdiv: Enable by default on the supported platforms This commit makes sure Linux and Windows buildbots are using OpenSubdiv and also enables OpenSubdiv by default on Windows. OSX is kept disabled still, this is due to OpenGL restrictions which are not solved in any way yet. Linux is defaults to OpenSubdiv disabled because it needs precompiled library. The documentation could be found there: http://wiki.blender.org/index.php/User:Nazg-gul/OpenSubdiv
2015-08-05 12:42:00 +02:00
_init_OPENSUBDIV
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
)
# customize...
Cleanup: cmake
2016-04-23 16:16:15 +02:00
if(UNIX AND NOT APPLE)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
# some of these libraries are problematic on Linux
# disable less important dependencies by default
set(_init_CODEC_FFMPEG OFF)
set(_init_CYCLES_OSL OFF)
set(_init_IMAGE_OPENEXR OFF)
set(_init_INPUT_NDOF OFF)
set(_init_JACK OFF)
set(_init_OPENCOLLADA OFF)
set(_init_OPENCOLORIO OFF)
set(_init_SDL OFF)
set(_init_FFTW3 OFF)
OpenSubdiv: Enable by default on the supported platforms This commit makes sure Linux and Windows buildbots are using OpenSubdiv and also enables OpenSubdiv by default on Windows. OSX is kept disabled still, this is due to OpenGL restrictions which are not solved in any way yet. Linux is defaults to OpenSubdiv disabled because it needs precompiled library. The documentation could be found there: http://wiki.blender.org/index.php/User:Nazg-gul/OpenSubdiv
2015-08-05 12:42:00 +02:00
set(_init_OPENSUBDIV OFF)
CMake: modify recent platform defaults Now only disable Jack and NDof on OSX Also comment main block for platform checks
2015-07-28 09:47:21 +02:00
elseif(WIN32)
set(_init_JACK OFF)
elseif(APPLE)
set(_init_JACK OFF)
OpenSubdiv: Enable by default on the supported platforms This commit makes sure Linux and Windows buildbots are using OpenSubdiv and also enables OpenSubdiv by default on Windows. OSX is kept disabled still, this is due to OpenGL restrictions which are not solved in any way yet. Linux is defaults to OpenSubdiv disabled because it needs precompiled library. The documentation could be found there: http://wiki.blender.org/index.php/User:Nazg-gul/OpenSubdiv
2015-08-05 12:42:00 +02:00
set(_init_OPENSUBDIV OFF)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
endif()
CMake: correct own error using undefined var
2014-11-26 13:24:56 +01:00
#-----------------------------------------------------------------------------
# Options
# First platform spesific non-cached vars
if(UNIX AND NOT APPLE)
set(WITH_X11 ON)
endif()
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
# Blender internal features
Advanced CMake option to build the player without blender: WITH_BLENDER
2011-07-13 10:15:06 +02:00
option(WITH_BLENDER "Build blender (disable to build only the blender player)" ON)
mark_as_advanced(WITH_BLENDER)
when checking for windows check sys.platform starts with "win" rather then '== "win32"' & avoid importing platform. also add some notes to CMake options.
2011-03-11 02:24:16 +01:00
option(WITH_INTERNATIONAL "Enable I18N (International fonts and text)" ON)
CMake build option for security report: CVE-2009-3850 Nothing is changed by default but some linux distributions want to have executing python be opt-in. This keeps the same functionality but disables auto-run from factory settings and in background mode unless its enabled as a command line argument. This CMake option is marked as advanced and wont show in the regular options list so its less likely to be enabled by people that like to turn everything ON without reading descriptions :)
2011-04-28 08:20:47 +02:00
when checking for windows check sys.platform starts with "win" rather then '== "win32"' & avoid importing platform. also add some notes to CMake options.
2011-03-11 02:24:16 +01:00
option(WITH_PYTHON "Enable Embedded Python API (only disable for development)" ON)
Python script auto-execution changes: - script execution is off by default - if a blend file attempts to execute a script this shows a message in the header with the action that was suppressed (script/driver/game-autostart) and 2 buttons to either reload the file trusted, or to ignore the message. - the file selector will always default to use the trust setting in the user preferences, but reloading an open file will keep using the current setting (whatever was set before or set on the command-line). - added SCons setting WITH_BF_PYTHON_SECURITY, this sets the default state for the user prefereces not to trust blend files on load. ... this option was in CMake before, but always off, now its enabled by default for SCons and CMake, and forced on in CMake for now.
2013-06-10 02:42:16 +02:00
option(WITH_PYTHON_SECURITY "Disables execution of scripts within blend files by default" ON)
missed setting WITH_BUILTIN_GLEW on non *nux OS's also made WITH_PYTHON advanced.
2011-04-06 03:51:43 +02:00
mark_as_advanced(WITH_PYTHON) # dont want people disabling this unless they really know what they are doing.
code cleanup: correct spelling
2012-09-28 08:45:20 +02:00
mark_as_advanced(WITH_PYTHON_SECURITY) # some distributions see this as a security issue, rather than have them patch it, make a build option.
CMake build option for security report: CVE-2009-3850 Nothing is changed by default but some linux distributions want to have executing python be opt-in. This keeps the same functionality but disables auto-run from factory settings and in background mode unless its enabled as a command line argument. This CMake option is marked as advanced and wont show in the regular options list so its less likely to be enabled by people that like to turn everything ON without reading descriptions :)
2011-04-28 08:20:47 +02:00
when checking for windows check sys.platform starts with "win" rather then '== "win32"' & avoid importing platform. also add some notes to CMake options.
2011-03-11 02:24:16 +01:00
option(WITH_PYTHON_SAFETY "Enable internal API error checking to track invalid data to prevent crash on access (at the expense of some effeciency, only enable for development)." OFF)
CMake: mark lib/debug options advanced
2015-03-05 05:23:22 +01:00
mark_as_advanced(WITH_PYTHON_SAFETY)
CMake: tweak recent py module changes support installing portable builds to CMAKE_INSTALL_PREFIX
2015-03-24 09:09:51 +01:00
option(WITH_PYTHON_MODULE "Enable building as a python module which runs without a user interface, like running regular blender in background mode (experimental, only enable for development), installs to PYTHON_SITE_PACKAGES (or CMAKE_INSTALL_PREFIX if WITH_INSTALL_PORTABLE is enabled)." OFF)
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
if(APPLE)
WITH_PYTHON_FRAMEWORK cmake option for OSX This option allow Blender to be linked against the Framework python It's useful if you want to have blenderplayer and bpy in the same application and need to avoid PyThread problems. patch reviewed by Jens Verwiebe before 2.66. He may want to change something though. (also small: I changed: /Library/Frameworks/Python.framework/Versions//python by /Library/Frameworks/Python.framework/Versions//Python as the latter seems to be the norm)
2013-02-22 23:24:38 +01:00
option(WITH_PYTHON_FRAMEWORK "Enable building using the Python available in the framework (OSX only)" OFF)
endif()
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_BUILDINFO "Include extra build details (only disable for development & faster builds)" ${_init_BUILDINFO})
CMake: tweak so 2.8.7 and older still work (disable WITH_BUILDINFO)
2014-08-01 19:07:41 +02:00
if(${CMAKE_VERSION} VERSION_LESS 2.8.8)
# add_library OBJECT arg unsupported
set(WITH_BUILDINFO OFF)
endif()
when checking for windows check sys.platform starts with "win" rather then '== "win32"' & avoid importing platform. also add some notes to CMake options.
2011-03-11 02:24:16 +01:00
option(WITH_IK_ITASC "Enable ITASC IK solver (only disable for development & for incompatible C++ compilers)" ON)
cmake option to build without iksolver
2012-08-18 15:36:29 +02:00
option(WITH_IK_SOLVER "Enable Legacy IK solver (only disable for development)" ON)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_FFTW3 "Enable FFTW3 support (Used for smoke and audio effects)" ${_init_FFTW3})
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
option(WITH_BULLET "Enable Bullet (Physics Engine)" ON)
add option WITH_SYSTEM_BULLET to link against the bullet installation found on the system. Note: this doesn't work yet for everything with latest stable bullet (2.81), need to look into why and likely apply some patches upstream. However I managed to link blender by disabling some features, likely it can be made to work without too much trouble.
2013-01-03 01:23:52 +01:00
option(WITH_SYSTEM_BULLET "Use the systems bullet library (currently unsupported due to missing features in upstream!)" )
mark_as_advanced(WITH_SYSTEM_BULLET)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_GAMEENGINE "Enable Game Engine" ${_init_GAMEENGINE})
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
option(WITH_PLAYER "Build Player" OFF)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_OPENCOLORIO "Enable OpenColorIO color management" ${_init_OPENCOLORIO})
CMake: Add option to enable -Werror cflag in some areas It is rather annoying attitude nowadays to use const qualifier all over the place, including using it for multi-dimensional arrays. This isn't really supported in GCC prior to version 5.0 because it considers such an arrays to be a "pointer to a const pointer" which gives implicit casting errors. It's not possible to disable this particular type of warnings treated as errors in any GCC version prior to 5.0 as well, meaning currently usage of -Werror globally in Blender code is not possible at all. This commit makes it possible to use -Werror in areas which are complaint with older GCC versions. New advanced CMake options are: - WITH_COMPOSITOR_WERROR - WITH_LIBMV_WERROR - WITH_CYCLES_WERROR
2015-07-18 10:35:03 +02:00
# Compositor
option(WITH_COMPOSITOR "Enable the tile based nodal compositor" ON)
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 16:12:55 +02:00
OpenSubdiv: Enable by default on the supported platforms This commit makes sure Linux and Windows buildbots are using OpenSubdiv and also enables OpenSubdiv by default on Windows. OSX is kept disabled still, this is due to OpenGL restrictions which are not solved in any way yet. Linux is defaults to OpenSubdiv disabled because it needs precompiled library. The documentation could be found there: http://wiki.blender.org/index.php/User:Nazg-gul/OpenSubdiv
2015-08-05 12:42:00 +02:00
option(WITH_OPENSUBDIV "Enable OpenSubdiv for surface subdivision" _init_OPENSUBDIV)
OpenSubdiv: Commit of OpenSubdiv integration into Blender This commit contains all the remained parts needed for initial integration of OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU backends which works in the following way: - When SubSurf modifier is the last in the modifiers stack then GPU pipeline of OpenSubdiv is used, making viewport performance as fast as possible. This also requires graphscard with GLSL 1.5 support. If this requirement is not met, then no GPU pipeline is used at all. - If SubSurf is not a last modifier or if DerivesMesh is being evaluated for rendering then CPU limit evaluation API from OpenSubdiv is used. This only replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG structures exactly the same as they used to be for ages now. This integration is fully covered with ifdef and not enabled by default because there are several TODOs to be solved first: - Face varying data interpolation is not really cleanly implemented for GPU in OpenSubdiv 3.0. It is also not implemented for limit evaluation API. This basically means we'll have really hard time supporting UVs. - Limit evaluation only works with adaptivly subdivided meshes so far, which basically means all the points of CCG are pushed to the limit. This gives different result from old code. - There are some serious optimizations possible on the topology refiner creation, which would speed up initial OpenSubdiv mesh creation. - There are some hardcoded asumptions in the GPU and DerivedMesh areas which could be generalized. That's something where Antony and Campbell can help, making it so the code is structured in a way which is reusable by all planned viewport projects. - There are also some workarounds in the dependency graph to make sure OpenGL buffers are only freed from the main thread. Those who'll be wanting to make experiments with this code should grab dev branch (NOT master) from https://github.com/Nazg-Gul/OpenSubdiv/tree/dev There are some patches applied in there which we're working on on getting into upstream.
2015-07-20 16:08:06 +02:00
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
option(WITH_OPENVDB "Enable features relying on OpenVDB" OFF)
option(WITH_OPENVDB_BLOSC "Enable blosc compression for OpenVDB, only enable if OpenVDB was built with blosc support" OFF)
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 08:04:54 +02:00
# GHOST Windowing Library Options
option(WITH_GHOST_DEBUG "Enable debugging output for the GHOST library" OFF)
mark_as_advanced(WITH_GHOST_DEBUG)
cmake option to build without an audio library.
2011-06-23 11:27:56 +02:00
rather then → rather than
2016-01-18 10:20:08 +01:00
option(WITH_GHOST_SDL "Enable building Blender against SDL for windowing rather than the native APIs" OFF)
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 08:04:54 +02:00
mark_as_advanced(WITH_GHOST_SDL)
build option to use SDL 1.3 for GHOST rather then X11/Win32/Cocoa api's, This opens up the option for blender to be more easily ported to other devices, OS's. TODO - continuous grab. - text glitch with multiple windows (was a bug in X11 too for a while, will check on this)
2011-07-12 15:17:54 +02:00
CMake: remove deprecated mudflap option
2014-11-13 19:43:15 +01:00
if(WITH_X11)
option(WITH_GHOST_XDND "Enable drag'n'drop support on X11 using XDND protocol" ON)
endif()
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 08:04:54 +02:00
# Misc...
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 16:12:55 +02:00
option(WITH_HEADLESS "Build without graphical support (renderfarm, server mode only)" OFF)
mark_as_advanced(WITH_HEADLESS)
Typo fixes for the typo fixes. :D
2011-10-23 17:43:12 +02:00
option(WITH_AUDASPACE "Build with blenders audio library (only disable if you know what you're doing!)" ON)
Audaspace: fixing problems for the merge to master suggested by Campbell and Sergey. - rename WITH_EXTERNAL_AUDASPACE to WITH_SYSTEM_AUDASPACE. - rename C/PYAUDASPACE to AUDASPACE_C/PY - simplifying cmake defines and includes. - fixing include paths and enabling WITH_SYSTEM_AUDASPACE for windows. - fixing scons building. - other minor build system fixes.
2015-06-16 10:03:35 +02:00
option(WITH_SYSTEM_AUDASPACE "Build with external audaspace library installed on the system (only enable if you know what you're doing!)" OFF)
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 08:04:54 +02:00
mark_as_advanced(WITH_AUDASPACE)
Audaspace: fixing problems for the merge to master suggested by Campbell and Sergey. - rename WITH_EXTERNAL_AUDASPACE to WITH_SYSTEM_AUDASPACE. - rename C/PYAUDASPACE to AUDASPACE_C/PY - simplifying cmake defines and includes. - fixing include paths and enabling WITH_SYSTEM_AUDASPACE for windows. - fixing scons building. - other minor build system fixes.
2015-06-16 10:03:35 +02:00
mark_as_advanced(WITH_SYSTEM_AUDASPACE)
if(NOT WITH_AUDASPACE)
set(WITH_SYSTEM_AUDASPACE OFF)
endif()
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 08:04:54 +02:00
CMake: enable OpenMP for all platforms by default This is done in SCons and the only reason to disable OpenMP on Windows was to deal with the express version of compilers. Now when we are about to switch to msvc2013 by default we can safely enable OpenMP there since even express version of this beast supports OpenMP.
2014-04-14 11:38:34 +02:00
option(WITH_OPENMP "Enable OpenMP (has to be supported by the compiler)" ON)
Buildbot: Initial work to move linux build environment to CMake This is so called "seems to work in dry tests" commit which is aimed to switch linux release environment to CMake. Some notes: - There's no special handle of libstdc++, but it wasn't really static for quite some time in SCons configuration and nobody really complained. - It was quite tricky to get OpenMP linked statically with just using some configuration so we went ahead and added a special option to CMake now which is only exist on Linux and advertised as shouldn't be used. - Packing is happening manually in slave_pack.py. This is because we have to add some really special files to the archive (mesa libraries for example) which we can't really handle from CMake/CPack in a nice generic way. Don't think it's bad approach, at least crappynness is localized and it's not _that_ crappy anyway. - Windows buildbot should keep working, but needs doublechecing. It's just a build folder changed, but you never know what it might imply. - Some further tweaks are likely needed to ensure all builders are working. Thanks Campbell for assistance in this patch!
2015-12-02 14:09:06 +01:00
if(UNIX AND NOT APPLE)
option(WITH_OPENMP_STATIC "Link OpenMP statically (only used by the release environment)" OFF)
mark_as_advanced(WITH_OPENMP_STATIC)
endif()
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
if(WITH_X11)
option(WITH_X11_XINPUT "Enable X11 Xinput (tablet support and unicode input)" ON)
option(WITH_X11_XF86VMODE "Enable X11 video mode switching" ON)
endif()
if(UNIX AND NOT APPLE)
option(WITH_SYSTEM_GLEW "Use GLEW OpenGL wrapper library provided by the operating system" ON)
option(WITH_SYSTEM_GLES "Use OpenGL ES library provided by the operating system" ON)
missed setting WITH_BUILTIN_GLEW on non *nux OS's also made WITH_PYTHON advanced.
2011-04-06 03:51:43 +02:00
else()
# not an option for other OS's
rename WITH_BUILTIN_GLEW, WITH_SYSTEM_GLEW & negate.
2012-06-23 15:42:14 +02:00
set(WITH_SYSTEM_GLEW OFF)
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
set(WITH_SYSTEM_GLES OFF)
add cmake option to build without xinput (tablet support)
2011-03-25 05:56:48 +01:00
endif()
add cmake option WITH_SYSTEM_OPENJPEG so linux can build cycles without having libopenjpeg installed.
2012-06-23 16:23:44 +02:00
# (unix defaults to System OpenJPEG On)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_SYSTEM_OPENJPEG "Use the operating systems OpenJPEG library" OFF)
add cmake option WITH_SYSTEM_OPENJPEG so linux can build cycles without having libopenjpeg installed.
2012-06-23 16:23:44 +02:00
CMake: unbundle eigen3 Optionally use systems eigen3 library. T41989 by @hasufell with edits
2015-03-19 05:41:41 +01:00
if(UNIX AND NOT APPLE)
option(WITH_SYSTEM_EIGEN3 "Use the systems Eigen3 library" OFF)
endif()
add cmake option WITH_SYSTEM_OPENJPEG so linux can build cycles without having libopenjpeg installed.
2012-06-23 16:23:44 +02:00
CMake options to disable Decimate and Boolean Modifiers: WITH_MOD_BOOLEAN, WITH_MOD_DECIMATE, renamed WITH_FLUID to WITH_MOD_FLUID
2010-10-23 17:40:13 +02:00
# Modifiers
style cleanup: also quiet harmless compiler warning.
2012-10-29 16:43:54 +01:00
option(WITH_MOD_FLUID "Enable Elbeem Modifier (Fluid Simulation)" ON)
option(WITH_MOD_SMOKE "Enable Smoke Modifier (Smoke Simulation)" ON)
option(WITH_MOD_BOOLEAN "Enable Boolean Modifier" ON)
option(WITH_MOD_REMESH "Enable Remesh Modifier" ON)
remove unmaintained eltopo, keeping scons/cmake entries, but commenting out user visible config to make branch merging less of a hassle.
2012-11-27 10:52:20 +01:00
# option(WITH_MOD_CLOTH_ELTOPO "Enable Experimental cloth solver" OFF) # this is now only available in a branch
# mark_as_advanced(WITH_MOD_CLOTH_ELTOPO)
rename cmake WITH_OCEANSIM --> WITH_MOD_OCEANSIM and tag CYCLES_CUDA_BINARIES_ARCH as advanced.
2011-11-13 15:16:43 +01:00
option(WITH_MOD_OCEANSIM "Enable Ocean Modifier" OFF)
CMake options to disable Decimate and Boolean Modifiers: WITH_MOD_BOOLEAN, WITH_MOD_DECIMATE, renamed WITH_FLUID to WITH_MOD_FLUID
2010-10-23 17:40:13 +02:00
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
# Image format support
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_OPENIMAGEIO "Enable OpenImageIO Support (http://www.openimageio.org)" ON)
option(WITH_IMAGE_OPENEXR "Enable OpenEXR Support (http://www.openexr.com)" ${_init_IMAGE_OPENEXR})
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
option(WITH_IMAGE_OPENJPEG "Enable OpenJpeg Support (http://www.openjpeg.org)" ON)
Revert changes that disable features on MinGW. To compile on MinGW it is important to have the latest MinGW (gcc 4.6.2) I have updated the instructions on the wiki to reflect this: http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Windows/Environment
2012-04-12 10:36:07 +02:00
option(WITH_IMAGE_TIFF "Enable LibTIFF Support" ON)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
option(WITH_IMAGE_DDS "Enable DDS Image Support" ON)
option(WITH_IMAGE_CINEON "Enable CINEON and DPX Image Support" ON)
option(WITH_IMAGE_HDR "Enable HDR Image Support" ON)
cmake - option to disable the frame server
2011-07-22 01:06:51 +02:00
option(WITH_IMAGE_FRAMESERVER "Enable image FrameServer Support for rendering" ON)
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
Add option for CMake to build libredcode, also use CODEC prefix for ffmpeg, quicktime & sndfile options.
2010-11-30 19:52:39 +01:00
# Audio/Video format support
add option to build without blenders default avi codec.
2012-10-08 04:51:42 +02:00
option(WITH_CODEC_AVI "Enable Blenders own AVI file support (raw/jpeg)" ON)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_CODEC_FFMPEG "Enable FFMPeg Support (http://ffmpeg.org)" ${_init_CODEC_FFMPEG})
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
option(WITH_CODEC_SNDFILE "Enable libsndfile Support (http://www.mega-nerd.com/libsndfile)" OFF)
CMake OS X: enable FFMPEG and Quicktime by default to match release and scons.
2013-11-17 09:23:18 +01:00
Quicktime: remove backend with the old quicktime API, and keep the QTKit backend. This means that if you have WITH_BF_QUICKTIME or WITH_CODEC_QUICKTIME enabled, it will always use QTKit. The old backend was only used on 32 bit OS X builds, now 32 and 64 bit builds will give consistent input/output. On Windows or Linux quicktime isn't being used.
2013-11-06 02:45:15 +01:00
if(APPLE)
CMake OS X: enable FFMPEG and Quicktime by default to match release and scons.
2013-11-17 09:23:18 +01:00
option(WITH_CODEC_QUICKTIME "Enable Quicktime Support" ON)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
# 3D format support
CMake: only enable opencollada by default on OS X and Windows, consistent with scons.
2013-11-18 17:12:19 +01:00
# Disable opencollada when we don't have precompiled libs
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_OPENCOLLADA "Enable OpenCollada Support (http://www.opencollada.org)" ${_init_OPENCOLLADA})
- remove CPPFLAG XP_UNIX from CMake, Scons and Irix make, checked our own code and /usr/include, its only used in our netscape plugin. - CMake on unix default OpenMP to enabled. - Scons on linux default OpenMP to enabled. - copying python is slow, for scons only copy if the directory has not been created.
2009-11-19 12:49:42 +01:00
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
# Sound output
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_SDL "Enable SDL for sound and joystick support" ${_init_SDL})
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
option(WITH_OPENAL "Enable OpenAL Support (http://www.openal.org)" ON)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_JACK "Enable Jack Support (http://www.jackaudio.org)" ${_init_JACK})
Fix #33518: Jack sync doesn't work in 2.64, 2.64 or 2.65 stable versions Added new build option WITH_JACK_DYNLOAD for CMake and WITH_BF_JACK_DYNLOAD for SCons, which means there'll be no build-time linking against libjack and getting symbols from libjack will happen runtime using dlopen and dlsym tricks. Alternative would be to use weak linking, but it'll require having wrapper for preloading libjack. This new options are disabled by default and they only intended to be used on linux. Other platforms shall not be using this and there shall be no functional changes on non-linux platforms at all.
2013-03-27 08:19:54 +01:00
if(UNIX AND NOT APPLE)
option(WITH_JACK_DYNLOAD "Enable runtime dynamic Jack libraries loading" OFF)
endif()
Support dynamic loading of SDL libraries This is mainly to address old issue when one need to have SDL library installed in order to use our official builds. Some hip distros already installs SDL, but it's not quite the same across all the variety of the distros. We also now switching to SDL-2.0, most of the distros have it in repositories already, so it shouldn't be huge deal to install it if needed. Reviewers: campbellbarton Reviewed By: campbellbarton Differential Revision: https://developer.blender.org/D878
2014-11-17 12:35:36 +01:00
if(UNIX AND NOT APPLE)
option(WITH_SDL_DYNLOAD "Enable runtime dynamic SDL libraries loading" OFF)
endif()
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
# Compression
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
option(WITH_LZO "Enable fast LZO compression (used for pointcache)" ON)
option(WITH_LZMA "Enable best LZMA compression, (used for pointcache)" ON)
CMake: unbundle LZO library Patch T41989 by @hasufell
2015-03-13 12:33:31 +01:00
if(UNIX AND NOT APPLE)
error in last commit
2015-03-13 12:46:15 +01:00
option(WITH_SYSTEM_LZO "Use the system LZO library" OFF)
CMake: unbundle LZO library Patch T41989 by @hasufell
2015-03-13 12:33:31 +01:00
endif()
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
Camera tracking integration =========================== Commiting camera tracking integration gsoc project into trunk. This commit includes: - Bundled version of libmv library (with some changes against official repo, re-sync with libmv repo a bit later) - New datatype ID called MovieClip which is optimized to work with movie clips (both of movie files and image sequences) and doing camera/motion tracking operations. - New editor called Clip Editor which is currently used for motion/tracking stuff only, but which can be easily extended to work with masks too. This editor supports: * Loading movie files/image sequences * Build proxies with different size for loaded movie clip, also supports building undistorted proxies to increase speed of playback in undistorted mode. * Manual lens distortion mode calibration using grid and grease pencil * Supervised 2D tracking using two different algorithms KLT and SAD. * Basic algorithm for feature detection * Camera motion solving. scene orientation - New constraints to "link" scene objects with solved motions from clip: * Follow Track (make object follow 2D motion of track with given name or parent object to reconstructed 3D position of track) * Camera Solver to make camera moving in the same way as reconstructed camera This commit NOT includes changes from tomato branch: - New nodes (they'll be commited as separated patch) - Automatic image offset guessing for image input node and image editor (need to do more tests and gather more feedback) - Code cleanup in libmv-capi. It's not so critical cleanup, just increasing readability and understanadability of code. Better to make this chaneg when Keir will finish his current patch. More details about this project can be found on this page: http://wiki.blender.org/index.php/User:Nazg-gul/GSoC-2011 Further development of small features would be done in trunk, bigger/experimental features would first be implemented in tomato branch.
2011-11-07 13:55:18 +01:00
# Camera/motion tracking
CMake: Add option to enable -Werror cflag in some areas It is rather annoying attitude nowadays to use const qualifier all over the place, including using it for multi-dimensional arrays. This isn't really supported in GCC prior to version 5.0 because it considers such an arrays to be a "pointer to a const pointer" which gives implicit casting errors. It's not possible to disable this particular type of warnings treated as errors in any GCC version prior to 5.0 as well, meaning currently usage of -Werror globally in Blender code is not possible at all. This commit makes it possible to use -Werror in areas which are complaint with older GCC versions. New advanced CMake options are: - WITH_COMPOSITOR_WERROR - WITH_LIBMV_WERROR - WITH_CYCLES_WERROR
2015-07-18 10:35:03 +02:00
option(WITH_LIBMV "Enable Libmv structure from motion library" ON)
CMake: Keep Schur specializations OFF by default config Now when doing full build is real easy on all platforms, we can only keep it enabled for the blender_full configuration.
2016-01-26 11:47:53 +01:00
option(WITH_LIBMV_SCHUR_SPECIALIZATIONS "Enable fixed-size schur specializations." OFF)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
mark_as_advanced(WITH_LIBMV_SCHUR_SPECIALIZATIONS)
Camera tracking integration =========================== Commiting camera tracking integration gsoc project into trunk. This commit includes: - Bundled version of libmv library (with some changes against official repo, re-sync with libmv repo a bit later) - New datatype ID called MovieClip which is optimized to work with movie clips (both of movie files and image sequences) and doing camera/motion tracking operations. - New editor called Clip Editor which is currently used for motion/tracking stuff only, but which can be easily extended to work with masks too. This editor supports: * Loading movie files/image sequences * Build proxies with different size for loaded movie clip, also supports building undistorted proxies to increase speed of playback in undistorted mode. * Manual lens distortion mode calibration using grid and grease pencil * Supervised 2D tracking using two different algorithms KLT and SAD. * Basic algorithm for feature detection * Camera motion solving. scene orientation - New constraints to "link" scene objects with solved motions from clip: * Follow Track (make object follow 2D motion of track with given name or parent object to reconstructed 3D position of track) * Camera Solver to make camera moving in the same way as reconstructed camera This commit NOT includes changes from tomato branch: - New nodes (they'll be commited as separated patch) - Automatic image offset guessing for image input node and image editor (need to do more tests and gather more feedback) - Code cleanup in libmv-capi. It's not so critical cleanup, just increasing readability and understanadability of code. Better to make this chaneg when Keir will finish his current patch. More details about this project can be found on this page: http://wiki.blender.org/index.php/User:Nazg-gul/GSoC-2011 Further development of small features would be done in trunk, bigger/experimental features would first be implemented in tomato branch.
2011-11-07 13:55:18 +01:00
Another big patch set by Bastien Montagne, thanks a lot! * Made Freestyle optional (turned on by default). * Fix for missing bpath.c updates in the previous merge of trunk changes.
2012-12-20 08:57:26 +01:00
# Freestyle
option(WITH_FREESTYLE "Enable Freestyle (advanced edges rendering)" ON)
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
# Misc
Input Method Editor (IME) support for text buttons Original patch by @random (D765) with some minor work done by @campbell and me. At this place, I'd like call out a number of people who were involved and deserve a big "Thank you!": * At the first place @randon who developed and submitted the patch * The Blendercn community which helped a lot with testing - espacially * @yuzukyo, @leon_cheung and @kjym3 * @campbellbarton, @mont29 and @sergey for their help and advises during * review * @ton who realized the importance of this early on and asked me for * reviewing We are still not finished, as this is only the first part of the implementaion, but there's more to come!
2014-12-07 00:58:17 +01:00
if(WIN32)
option(WITH_INPUT_IME "Enable Input Method Editor (IME) for complex Asian character input" ON)
endif()
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_INPUT_NDOF "Enable NDOF input devices (SpaceNavigator and friends)" ${_init_INPUT_NDOF})
formatting edits only
2011-09-30 17:51:58 +02:00
option(WITH_RAYOPTIMIZATION "Enable use of SIMD (SSE) optimizations for the raytracer" ON)
CMake: Linux/Unix Only, use 'install' target rather then copying files with post-build commands. Main change is that you need to run 'make install', which copies files to ./bin by default unless WITH_INSTALL_PORTABLE is OFF, where CMAKE_INSTALL_PREFIX is used for a typical unix-system install.
2011-03-06 12:41:30 +01:00
if(UNIX AND NOT APPLE)
option(WITH_INSTALL_PORTABLE "Install redistributeable runtime, otherwise install into CMAKE_INSTALL_PREFIX" ON)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
option(WITH_STATIC_LIBS "Try to link with static libraries, as much as possible, to make blender more portable across distributions" OFF)
Rename CMake's Boost_USE_ICU to WITH_BOOST_ICU (update your CMake conf if you make static builds!), and add it as CMake option. Patch by gdh (Gavin Howard), many thanks!
2013-02-23 21:42:15 +01:00
if(WITH_STATIC_LIBS)
option(WITH_BOOST_ICU "Boost uses ICU library (required for linking with static Boost built with libicu)." OFF)
mark_as_advanced(WITH_BOOST_ICU)
endif()
CMake: Linux/Unix Only, use 'install' target rather then copying files with post-build commands. Main change is that you need to run 'make install', which copies files to ./bin by default unless WITH_INSTALL_PORTABLE is OFF, where CMAKE_INSTALL_PREFIX is used for a typical unix-system install.
2011-03-06 12:41:30 +01:00
endif()
CMake: only show py module install options when used
2016-03-15 13:50:44 +01:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
option(WITH_PYTHON_INSTALL "Copy system python into the blender install folder" ON)
CMake: only show py module install options when used
2016-03-15 13:50:44 +01:00
if(WITH_PYTHON_INSTALL)
option(WITH_PYTHON_INSTALL_NUMPY "Copy system numpy into the blender install folder" ON)
set(PYTHON_NUMPY_PATH "" CACHE PATH "Path to python site-packages or dist-packages containing 'numpy' module")
mark_as_advanced(PYTHON_NUMPY_PATH)
if(UNIX AND NOT APPLE)
option(WITH_PYTHON_INSTALL_REQUESTS "Copy system requests into the blender install folder" ON)
set(PYTHON_REQUESTS_PATH "" CACHE PATH "Path to python site-packages or dist-packages containing 'requests' module")
mark_as_advanced(PYTHON_REQUESTS_PATH)
endif()
endif()
CMake: Add a flag to explicitly disable SSE/SSE2 intrinsics The flag is called WITH_CPU_SSE, it is ON by default so no one should be affected by the change really. This should hopefully fix https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=763755
2014-10-15 10:53:12 +02:00
option(WITH_CPU_SSE "Enable SIMD instruction if they're detected on the host machine" ON)
mark_as_advanced(WITH_CPU_SSE)
cmake - improved detection of numpy, now works for typical ubuntu installation. numpy directory can be referenced manually with the advanced option PYTHON_NUMPY_PATH if needed.
2012-05-02 01:22:58 +02:00
Cycles: hook up the CMake build system. New build instructions for Ubuntu Linux in the wiki: http://wiki.blender.org/index.php/Dev:2.5/Source/Cycles
2011-04-28 15:47:27 +02:00
# Cycles
CMake: Add option to enable -Werror cflag in some areas It is rather annoying attitude nowadays to use const qualifier all over the place, including using it for multi-dimensional arrays. This isn't really supported in GCC prior to version 5.0 because it considers such an arrays to be a "pointer to a const pointer" which gives implicit casting errors. It's not possible to disable this particular type of warnings treated as errors in any GCC version prior to 5.0 as well, meaning currently usage of -Werror globally in Blender code is not possible at all. This commit makes it possible to use -Werror in areas which are complaint with older GCC versions. New advanced CMake options are: - WITH_COMPOSITOR_WERROR - WITH_LIBMV_WERROR - WITH_CYCLES_WERROR
2015-07-18 10:35:03 +02:00
option(WITH_CYCLES "Enable Cycles Render Engine" ON)
option(WITH_CYCLES_STANDALONE "Build Cycles standalone application" OFF)
option(WITH_CYCLES_STANDALONE_GUI "Build Cycles standalone with GUI" OFF)
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
option(WITH_CYCLES_OSL "Build Cycles with OSL support" ${_init_CYCLES_OSL})
CMake: Add option to enable -Werror cflag in some areas It is rather annoying attitude nowadays to use const qualifier all over the place, including using it for multi-dimensional arrays. This isn't really supported in GCC prior to version 5.0 because it considers such an arrays to be a "pointer to a const pointer" which gives implicit casting errors. It's not possible to disable this particular type of warnings treated as errors in any GCC version prior to 5.0 as well, meaning currently usage of -Werror globally in Blender code is not possible at all. This commit makes it possible to use -Werror in areas which are complaint with older GCC versions. New advanced CMake options are: - WITH_COMPOSITOR_WERROR - WITH_LIBMV_WERROR - WITH_CYCLES_WERROR
2015-07-18 10:35:03 +02:00
option(WITH_CYCLES_CUDA_BINARIES "Build Cycles CUDA binaries" OFF)
Cycles: Enable compilation of sm_37 kernels by default Makes sense to keep support of top-range cards "out of the box".
2016-01-28 11:59:40 +01:00
set(CYCLES_CUDA_BINARIES_ARCH sm_20 sm_21 sm_30 sm_35 sm_37 sm_50 sm_52 CACHE STRING "CUDA architectures to build binaries for")
rename cmake WITH_OCEANSIM --> WITH_MOD_OCEANSIM and tag CYCLES_CUDA_BINARIES_ARCH as advanced.
2011-11-13 15:16:43 +01:00
mark_as_advanced(CYCLES_CUDA_BINARIES_ARCH)
Disable building of CUDA 1.3 kernels for cycles for win32 cmake and mingw32 scons. They were already disabled for scons MSVC 32bit.
2012-05-22 14:30:37 +02:00
unset(PLATFORM_DEFAULT)
CMake: Add option to enable -Werror cflag in some areas It is rather annoying attitude nowadays to use const qualifier all over the place, including using it for multi-dimensional arrays. This isn't really supported in GCC prior to version 5.0 because it considers such an arrays to be a "pointer to a const pointer" which gives implicit casting errors. It's not possible to disable this particular type of warnings treated as errors in any GCC version prior to 5.0 as well, meaning currently usage of -Werror globally in Blender code is not possible at all. This commit makes it possible to use -Werror in areas which are complaint with older GCC versions. New advanced CMake options are: - WITH_COMPOSITOR_WERROR - WITH_LIBMV_WERROR - WITH_CYCLES_WERROR
2015-07-18 10:35:03 +02:00
option(WITH_CYCLES_LOGGING "Build Cycles with logging support" ON)
option(WITH_CYCLES_DEBUG "Build Cycles with extra debug capabilities" OFF)
Cycles: Add an option to build single kernel only which fits current CPU This seems quite useful for the development, so you don't need to wait all the kernels to be re-compiled when working on a new feature, which speeds up re-iteration. Marked as an advanced option, so if it doesn't work so well in practice it's safe to revert anyway.
2016-03-25 16:09:05 +01:00
option(WITH_CYCLES_NATIVE_ONLY "Build Cycles with native kernel only (which fits current CPU, use for development only)" OFF)
Cycles: Add support for debug passes Currently only summed number of traversal steps and intersections used by the camera ray intersection pass is implemented, but in the future we will support more debug passes which would help checking what things makes the scene slow. Example of such extra passes could be number of bounces, time spent on the shader tree evaluation and so. Implementation from the Cycles side is pretty much straightforward, could only mention here that it's a build-time option disabled by default. From the blender side it's implemented as a PASS_DEBUG with several subtypes possible. This way we don't need to create an extra DNA pass type for each of the debug passes, saving us a bits. Reviewers: campbellbarton Reviewed By: campbellbarton Differential Revision: https://developer.blender.org/D813
2014-10-04 15:00:26 +02:00
mark_as_advanced(WITH_CYCLES_LOGGING)
mark_as_advanced(WITH_CYCLES_DEBUG)
Cycles: Add an option to build single kernel only which fits current CPU This seems quite useful for the development, so you don't need to wait all the kernels to be re-compiled when working on a new feature, which speeds up re-iteration. Marked as an advanced option, so if it doesn't work so well in practice it's safe to revert anyway.
2016-03-25 16:09:05 +01:00
mark_as_advanced(WITH_CYCLES_NATIVE_ONLY)
Cycles: hook up the CMake build system. New build instructions for Ubuntu Linux in the wiki: http://wiki.blender.org/index.php/Dev:2.5/Source/Cycles
2011-04-28 15:47:27 +02:00
Cycles: Add option to directly link against CUDA libraries The main purpose of such linking is to make Blender compatible with NVidia's debuggers and profilers which are doing some LD_PRELOAD magic to intercept some function calls. Such magic conflicts with our CUDA wrangler magic and causes segmentation faults. The option is disabled by default, so there's no affect on any of artists. In order to make Blender linked directly against CUDA library use the WITH_CUDA_DYNLOAD CMake option (it's marked as advanced).
2016-01-14 08:24:09 +01:00
option(WITH_CUDA_DYNLOAD "Dynamically load CUDA libraries at runtime" ON)
mark_as_advanced(WITH_CUDA_DYNLOAD)
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
# LLVM
option(WITH_LLVM "Use LLVM" OFF)
OSX/cmake: allow for llvm dynamic builds too, but prefer static
2014-08-06 12:48:06 +02:00
if(APPLE)
option(LLVM_STATIC "Link with LLVM static libraries" ON) # we prefer static llvm build on Apple, dyn build possible though
else()
option(LLVM_STATIC "Link with LLVM static libraries" OFF)
endif()
CMake: add LLVM_STATIC as cmake build option, so linux distributions can link LLVM dynamically. Patch by Dan Eicher.
2013-04-15 18:18:35 +02:00
mark_as_advanced(LLVM_STATIC)
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
option to link with jemalloc on *nix, off by default.
2011-05-12 13:16:32 +02:00
# disable for now, but plan to support on all platforms eventually
CMake: Enable JeMalloc by default It's really handy to have blender linked against jemalloc because of much better memory fragmentation handling by that library. To be noted: if jemalloc library is not found it'll be disabled with message about that, no compilation error should happen.
2015-02-14 11:13:48 +01:00
option(WITH_MEM_JEMALLOC "Enable malloc replacement (http://www.canonware.com/jemalloc)" ON)
option to link with jemalloc on *nix, off by default.
2011-05-12 13:16:32 +02:00
mark_as_advanced(WITH_MEM_JEMALLOC)
add cmake option WITH_MEM_VALGRIND, helps to track down errors with mempool use which sometimes only show up as bugs in very rare cases (because even though the element is freed, the chunk is still allocated).
2013-10-03 14:22:44 +02:00
# currently only used for BLI_mempool
option(WITH_MEM_VALGRIND "Enable extended valgrind support for better reporting" OFF)
mark_as_advanced(WITH_MEM_VALGRIND)
cmake - mark vars as advanced so they dont show up by default when configuring.
2010-12-08 10:02:08 +01:00
# Debug
when checking for windows check sys.platform starts with "win" rather then '== "win32"' & avoid importing platform. also add some notes to CMake options.
2011-03-11 02:24:16 +01:00
option(WITH_CXX_GUARDEDALLOC "Enable GuardedAlloc for C++ memory allocation tracking (only enable for development)" OFF)
cmake - mark vars as advanced so they dont show up by default when configuring.
2010-12-08 10:02:08 +01:00
mark_as_advanced(WITH_CXX_GUARDEDALLOC)
rename BKE_assert() --> BLI_assert().
2011-01-09 16:12:08 +01:00
option(WITH_ASSERT_ABORT "Call abort() when raising an assertion through BLI_assert()" OFF)
BKE_assert(), only prints the error unless cmake define WITH_ASSERT_ABORT is enabled and it will call abort(). made this option advanced so people don't enable along with other features.
2010-12-15 11:22:26 +01:00
mark_as_advanced(WITH_ASSERT_ABORT)
CMake: minor spelling fix for WITH_BOOST Reviewed By: brecht Differential Revision: http://developer.blender.org/D26
2013-11-21 17:38:52 +01:00
option(WITH_BOOST "Enable features depending on boost" ON)
expose WITH_BOOST as a cmake option, this just disables boost deps since it was becoming annoying to remember all of them.
2013-02-01 00:25:06 +01:00
GTest unit testing framework Currently covers only small set of functionality.
2014-06-18 14:49:17 +02:00
# Unit testsing
option(WITH_GTESTS "Enable GTest unit testing" OFF)
CMake: manpage creation is now optional
2014-11-13 14:07:34 +01:00
# Documentation
if(UNIX AND NOT APPLE)
option(WITH_DOC_MANPAGE "Create a manual page (Unix manpage)" OFF)
endif()
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
# OpenGL
Fix compilation error after recent commit
2014-10-08 00:11:23 +02:00
option(WITH_GLEW_MX "Support multiple GLEW contexts (experimental)" OFF )
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
option(WITH_GLEW_ES "Switches to experimental copy of GLEW that has support for OpenGL ES. (temporary option for development purposes)" OFF)
option(WITH_GL_EGL "Use the EGL OpenGL system library instead of the platform specific OpenGL system library (CGL, glX, or WGL)" OFF)
option(WITH_GL_PROFILE_COMPAT "Support using the OpenGL 'compatibility' profile. (deprecated)" ON )
option(WITH_GL_PROFILE_CORE "Support using the OpenGL 3.2+ 'core' profile." OFF)
option(WITH_GL_PROFILE_ES20 "Support using OpenGL ES 2.0. (thru either EGL or the AGL/WGL/XGL 'es20' profile)" OFF)
mark_as_advanced(
WITH_GLEW_MX
WITH_GLEW_ES
WITH_GL_EGL
WITH_GL_PROFILE_COMPAT
WITH_GL_PROFILE_CORE
WITH_GL_PROFILE_ES20
)
Cleanup: cmake
2014-11-13 15:03:30 +01:00
if(WITH_GL_PROFILE_COMPAT)
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
set(WITH_GLU ON)
else()
set(WITH_GLU OFF)
endif()
if(WIN32)
option(WITH_GL_ANGLE "Link with the ANGLE library, an OpenGL ES 2.0 implementation based on Direct3D, instead of the system OpenGL library." OFF)
mark_as_advanced(WITH_GL_ANGLE)
endif()
if(WITH_GLEW_ES AND WITH_SYSTEM_GLEW)
message(WARNING Ignoring WITH_SYSTEM_GLEW and using WITH_GLEW_ES)
set(WITH_SYSTEM_GLEW OFF)
endif()
CMake: make install prefix option irrelevant for MinGW too.
2015-12-27 16:57:31 +01:00
if(WIN32)
cmake buildfiles Cleanup / Refactor, no functional changes. Move away from using hardcoded ${target} when calling install() in cmake
2014-11-08 11:32:32 +01:00
getDefaultWindowsPrefixBase(CMAKE_GENERIC_PROGRAM_FILES)
set(CPACK_INSTALL_PREFIX ${CMAKE_GENERIC_PROGRAM_FILES}/${})
endif()
Experimental option to build Blender with C11 support It'll be nice to eventually go C11/C++11 by default, but for until then it's kinda handy to be able to build locally with C11 support, Reviewers: mont29, campbellbarton Reviewed By: mont29, campbellbarton Differential Revision: https://developer.blender.org/D1752
2016-01-29 17:43:40 +01:00
# Experimental support of C11 and C++11
option(WITH_C11 "Build with C11 standard enabled, for development use only!" OFF)
mark_as_advanced(WITH_C11)
CMake: use CXX for C++ in var name Follow convention cmake uses.
2016-03-13 05:01:52 +01:00
option(WITH_CXX11 "Build with C++11 standard enabled, for development use only!" OFF)
mark_as_advanced(WITH_CXX11)
Initial compilation support with C++11 featureset enabled This commit makes some preliminary fixes and tweaks aimed to make blender compilable with C++11 feature set. This includes: - Build system attribute to enable C++11 featureset. It's for sure default OFF, but easy to enable to have a play around with it and make sure all the stuff is compilable before we go C++11 for real. - Changes in Compositor to use non-named cl_int structure fields. This is because __STRICT_ANSI__ is defined by default by GCC and OpenCL does not use named fields in this case. - Changes to TYPE_CHECK() related on lack of typeof() in C++11 This uses decltype() instead with some trickery to make sure returned type is not a reference. - Changes for auto_ptr in Freestyle This actually conditionally switches between auto_ptr and unique_ptr since auto_ptr is deprecated in C++11. Seems to be not strictly needed but still nice to be ready for such an update anyway/ This all based on changes form depsgraph_refactor branch apart from the weird changes which were made in order to support MinGW compilation. Those parts of change would need to be carefully reviewed again after official move to gcc49 in MinGW. Tested on Linux with GCC-4.7 and Clang-3.5, other platforms are not tested and likely needs some more tweaks. Reviewers: campbellbarton, juicyfruit, mont29, lukastoenne, psy-fi, kjym3 Differential Revision: https://developer.blender.org/D1089
2015-02-09 18:23:21 +01:00
Depsgraph: New dependency graph integration commit This commit integrates the work done so far on the new dependency graph system, where goal was to replace legacy depsgraph with the new one, supporting loads of neat features like: - More granular dependency relation nature, which solves issues with fake cycles in the dependencies. - Move towards all-animatable, by better integration of drivers into the system. - Lay down some basis for upcoming copy-on-write, overrides and so on. The new system is living side-by-side with the previous one and disabled by default, so nothing will become suddenly broken. The way to enable new depsgraph is to pass `--new-depsgraph` command line argument. It's a bit early to consider the system production-ready, there are some TODOs and issues were discovered during the merge period, they'll be addressed ASAP. But it's important to merge, because it's the only way to attract artists to really start testing this system. There are number of assorted documents related on the design of the new system: * http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents * http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph There are also some user-related information online: * http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/ * http://code.blender.org/2015/03/more-dependency-graph-tricks/ Kudos to everyone who was involved into the project: - Joshua "Aligorith" Leung -- design specification, initial code - Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes - Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the project and so - Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the issues and recording/writing documentation. - Everyone else who i forgot to mention here :)
2015-05-12 12:05:57 +02:00
# Dependency graph
option(WITH_LEGACY_DEPSGRAPH "Build Blender with legacy dependency graph" ON)
CMake: set advanced var
2015-06-17 06:25:05 +02:00
mark_as_advanced(WITH_LEGACY_DEPSGRAPH)
Depsgraph: New dependency graph integration commit This commit integrates the work done so far on the new dependency graph system, where goal was to replace legacy depsgraph with the new one, supporting loads of neat features like: - More granular dependency relation nature, which solves issues with fake cycles in the dependencies. - Move towards all-animatable, by better integration of drivers into the system. - Lay down some basis for upcoming copy-on-write, overrides and so on. The new system is living side-by-side with the previous one and disabled by default, so nothing will become suddenly broken. The way to enable new depsgraph is to pass `--new-depsgraph` command line argument. It's a bit early to consider the system production-ready, there are some TODOs and issues were discovered during the merge period, they'll be addressed ASAP. But it's important to merge, because it's the only way to attract artists to really start testing this system. There are number of assorted documents related on the design of the new system: * http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents * http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph There are also some user-related information online: * http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/ * http://code.blender.org/2015/03/more-dependency-graph-tricks/ Kudos to everyone who was involved into the project: - Joshua "Aligorith" Leung -- design specification, initial code - Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes - Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the project and so - Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the issues and recording/writing documentation. - Everyone else who i forgot to mention here :)
2015-05-12 12:05:57 +02:00
CMake: disable some build option defaults T42569 This commit disables some lesser used dependencies for Linux/Unix systems by default. Run: `make full` to enabled options used in release build.
2014-11-13 23:32:01 +01:00
# avoid using again
option_defaults_clear()
# end option(...)
Fix: T42553 Linux cmake install now also without absolute path's OS X cmake probably needs more checking.
2014-11-11 21:44:26 +01:00
cmake buildfiles Cleanup / Refactor, no functional changes. Move away from using hardcoded ${target} when calling install() in cmake
2014-11-08 11:32:32 +01:00
# By default we want to install to the directory we are compiling our executables
# unless specified otherwise, which we currently do not allow
Cleanup: cmake
2014-11-13 15:03:30 +01:00
if(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT)
CMake: make install prefix option irrelevant for MinGW too.
2015-12-27 16:57:31 +01:00
if(WIN32)
Cleanup: cmake
2014-11-13 15:03:30 +01:00
set(CMAKE_INSTALL_PREFIX ${EXECUTABLE_OUTPUT_PATH}/\${BUILD_TYPE} CACHE PATH "default install path" FORCE)
Only do the portable fix on linux - thanks to Martijn Berger for noticing!
2014-11-13 14:10:30 +01:00
elseif(APPLE)
Cleanup: cmake
2014-11-13 15:03:30 +01:00
set(CMAKE_INSTALL_PREFIX ${EXECUTABLE_OUTPUT_PATH}/\${BUILD_TYPE} CACHE PATH "default install path" FORCE)
Only do the portable fix on linux - thanks to Martijn Berger for noticing!
2014-11-13 14:10:30 +01:00
else()
Cleanup: cmake
2014-11-13 15:03:30 +01:00
if(WITH_INSTALL_PORTABLE)
set(CMAKE_INSTALL_PREFIX ${EXECUTABLE_OUTPUT_PATH} CACHE PATH "default install path" FORCE)
Only do the portable fix on linux - thanks to Martijn Berger for noticing!
2014-11-13 14:10:30 +01:00
endif()
endif()
cmake buildfiles Cleanup / Refactor, no functional changes. Move away from using hardcoded ${target} when calling install() in cmake
2014-11-08 11:32:32 +01:00
endif()
Fix: T42553 Linux cmake install now also without absolute path's OS X cmake probably needs more checking.
2014-11-11 21:44:26 +01:00
cmake buildfiles Cleanup / Refactor, no functional changes. Move away from using hardcoded ${target} when calling install() in cmake
2014-11-08 11:32:32 +01:00
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
# Apple
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(APPLE)
CMake: remove OSX version lookup table This assumed the OSX SDK version matched the OSX version, which isn't always true. Also problematic for maintenance and would make building older Blender versions on OSX fail. Passing in pre-defined OSX_SYSTEM is also supported, if you have multiple and want to select one.
2016-03-10 07:56:07 +01:00
# require newer cmake on osx because of version handling,
# older cmake cannot handle 2 digit subversion!
cmake_minimum_required(VERSION 3.0.0)
Revert "Increase CMake minimum version to 3.0" This reverts commit ff3cf93405e63fa367f64412bcfe96b382b24b38. Turns out distros only a year old still use CMake 2.8x
2015-11-09 16:52:29 +01:00
CMake/OSX: Bugfix [#26375]: Add default values for the OSX architecture: x86_64 (also used to select the python dynlibs that'll be bundled with the application). Set deployment target to be 10.5 by default. Fix broken build introduced by recent source/creator/CMakeList.txt cleanup
2011-03-07 22:28:36 +01:00
if(NOT CMAKE_OSX_ARCHITECTURES)
set(CMAKE_OSX_ARCHITECTURES x86_64 CACHE STRING
"Choose the architecture you want to build Blender for: i386, x86_64 or ppc"
FORCE)
endif()
CMake: remove OSX version lookup table This assumed the OSX SDK version matched the OSX version, which isn't always true. Also problematic for maintenance and would make building older Blender versions on OSX fail. Passing in pre-defined OSX_SYSTEM is also supported, if you have multiple and want to select one.
2016-03-10 07:56:07 +01:00
if(NOT DEFINED OSX_SYSTEM)
execute_process(
COMMAND xcodebuild -version -sdk macosx SDKVersion
OUTPUT_VARIABLE OSX_SYSTEM
OUTPUT_STRIP_TRAILING_WHITESPACE)
OSX/cmake: rollback ca5bbe0e419b04d16ee7eb12fa7eaffa0266815a cause OSX versions can have not subversion thus sw_vers -productVersion is not usable for sdk setting
2013-11-15 23:20:16 +01:00
endif()
CMake: remove OSX version lookup table This assumed the OSX SDK version matched the OSX version, which isn't always true. Also problematic for maintenance and would make building older Blender versions on OSX fail. Passing in pre-defined OSX_SYSTEM is also supported, if you have multiple and want to select one.
2016-03-10 07:56:07 +01:00
OSX/cmake: move the new xcode-select-handing outside xcode conditional, to fix cmake/make compile
2013-09-13 23:13:57 +02:00
# workaround for incorrect cmake xcode lookup for developer previews - XCODE_VERSION does not take xcode-select path into accout
# but would always look into /Applications/Xcode.app while dev versions are named Xcode<version>-DP<preview_number>
execute_process(COMMAND xcode-select --print-path OUTPUT_VARIABLE XCODE_CHECK OUTPUT_STRIP_TRAILING_WHITESPACE)
string(REPLACE "/Contents/Developer" "" XCODE_BUNDLE ${XCODE_CHECK}) # truncate to bundlepath in any case
if(${CMAKE_GENERATOR} MATCHES "Xcode")
OSX/cmake: fix config by moving code back into xcode conditional, cmake/makefiles does not even have xcode_vesion lookup
2013-09-15 12:56:36 +02:00
if(${XCODE_VERSION} VERSION_GREATER 4.2) # earlier xcode has no bundled developer dir, no sense in getting xcode path from
string(SUBSTRING "${XCODE_CHECK}" 14 6 DP_NAME) # reduce to XCode name without dp extension
if(${DP_NAME} MATCHES Xcode5)
set(XCODE_VERSION 5)
endif()
endif()
OSX/cmake: allow for compiling with xcode develper previews by determing xcode-select
2013-09-13 16:57:57 +02:00
Restore my work overwritten by 52106 and some further reordering for cmake 2.8.10, todo: take into account missing symlinks for Library and /usr/local in newest xcode, affects ndof and jack
2012-11-11 19:06:10 +01:00
##### cmake incompatibility with xcode 4.3 and higher #####
OSX/cmake: move the xcode 4.3 warning up, it was not shown due error happened before, masking it
2012-03-15 16:32:56 +01:00
if(${XCODE_VERSION} MATCHES '') # cmake fails due looking for xcode in the wrong path, thus will be empty var
Restore my work overwritten by 52106 and some further reordering for cmake 2.8.10, todo: take into account missing symlinks for Library and /usr/local in newest xcode, affects ndof and jack
2012-11-11 19:06:10 +01:00
message(FATAL_ERROR "Xcode 4.3 and higher must be used with cmake 2.8-8 or higher")
OSX/cmake: move the xcode 4.3 warning up, it was not shown due error happened before, masking it
2012-03-15 16:32:56 +01:00
endif()
Restore my work overwritten by 52106 and some further reordering for cmake 2.8.10, todo: take into account missing symlinks for Library and /usr/local in newest xcode, affects ndof and jack
2012-11-11 19:06:10 +01:00
### end cmake incompatibility with xcode 4.3 and higher ###
OSX/cmake: move the xcode 4.3 warning up, it was not shown due error happened before, masking it
2012-03-15 16:32:56 +01:00
OSX/cmake: enable clang compiler with xcode >= 4.3, tested o.k.now
2012-03-15 00:42:46 +01:00
if(${XCODE_VERSION} VERSION_EQUAL 4 OR ${XCODE_VERSION} VERSION_GREATER 4 AND ${XCODE_VERSION} VERSION_LESS 4.3)
Fix cmake warning on Mac, when not using Xcode generator.
2012-02-20 15:19:45 +01:00
# Xcode 4 defaults to the Apple LLVM Compiler.
OSX/cmake: enable clang compiler with xcode >= 4.3, tested o.k.now
2012-03-15 00:42:46 +01:00
# Override the default compiler selection because Blender only compiles with gcc up to xcode 4.2
Fix cmake warning on Mac, when not using Xcode generator.
2012-02-20 15:19:45 +01:00
set(CMAKE_XCODE_ATTRIBUTE_GCC_VERSION "com.apple.compilers.llvmgcc42")
message(STATUS "Setting compiler to: " ${CMAKE_XCODE_ATTRIBUTE_GCC_VERSION})
endif()
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 17:21:48 +01:00
else() # unix makefile generator does not fill XCODE_VERSION var, so we get it with a command
attempt to fix osx build error
2012-05-17 16:00:54 +02:00
execute_process(COMMAND xcodebuild -version OUTPUT_VARIABLE XCODE_VERS_BUILD_NR)
string(SUBSTRING "${XCODE_VERS_BUILD_NR}" 6 3 XCODE_VERSION) # truncate away build-nr
unset(XCODE_VERS_BUILD_NR)
patch from Peter Stern to fix CMake building on OSX (without manual editing of configuration)
2012-02-02 12:08:48 +01:00
endif()
CMake: minor message cleanups.
2015-10-10 17:30:19 +02:00
message(STATUS "Detected OS X ${OSX_SYSTEM} and Xcode ${XCODE_VERSION} at ${XCODE_BUNDLE}")
OSX/cmake-2.8-10: just reorder, now sdk must be set before deployment target
2012-11-11 18:04:12 +01:00
if(${XCODE_VERSION} VERSION_LESS 4.3)
set(CMAKE_OSX_SYSROOT /Developer/SDKs/MacOSX${OSX_SYSTEM}.sdk CACHE PATH "" FORCE) # use guaranteed existing sdk
else()
OSX/cmake: allow for compiling with xcode develper previews by determing xcode-select
2013-09-13 16:57:57 +02:00
# note: xcode-select path could be ambigous, cause /Applications/Xcode.app/Contents/Developer or /Applications/Xcode.app would be allowed
# so i use a selfcomposed bundlepath here
set(OSX_SYSROOT_PREFIX ${XCODE_BUNDLE}/Contents/Developer/Platforms/MacOSX.platform)
message(STATUS "OSX_SYSROOT_PREFIX: " ${OSX_SYSROOT_PREFIX})
OSX/cmake-2.8-10: just reorder, now sdk must be set before deployment target
2012-11-11 18:04:12 +01:00
set(OSX_DEVELOPER_PREFIX /Developer/SDKs/MacOSX${OSX_SYSTEM}.sdk) # use guaranteed existing sdk
set(CMAKE_OSX_SYSROOT ${OSX_SYSROOT_PREFIX}/${OSX_DEVELOPER_PREFIX} CACHE PATH "" FORCE)
Code Cleanup: whitespace
2014-01-23 12:34:56 +01:00
if(${CMAKE_GENERATOR} MATCHES "Xcode")
set(CMAKE_XCODE_ATTRIBUTE_SDKROOT macosx${OSX_SYSTEM}) # to silence sdk not found warning, just overrides CMAKE_OSX_SYSROOT
endif()
OSX/cmake-2.8-10: just reorder, now sdk must be set before deployment target
2012-11-11 18:04:12 +01:00
endif()
OSX/Cmake: workaround for missing OpenGL headers, make sure sdk lookup
2013-11-20 00:38:51 +01:00
Code Cleanup: whitespace
2014-01-23 12:34:56 +01:00
if(OSX_SYSTEM MATCHES 10.9)
set(CMAKE_FIND_ROOT_PATH ${CMAKE_OSX_SYSROOT}) # make sure syslibs and headers are looked up in sdk ( expecially for 10.9 openGL atm. )
endif()
OSX/Cmake: workaround for missing OpenGL headers, make sure sdk lookup
2013-11-20 00:38:51 +01:00
OSX/cmake-2.8-10: just reorder, now sdk must be set before deployment target
2012-11-11 18:04:12 +01:00
if(NOT CMAKE_OSX_DEPLOYMENT_TARGET)
OSX/cmake: use CMAKE_XCODE_ATTRIBUTE rather than CMAKE_OSX_SYSROOT and set min deployment target to 10.6 now
2013-11-15 20:05:23 +01:00
set(CMAKE_OSX_DEPLOYMENT_TARGET "10.6" CACHE STRING "" FORCE) # 10.6 is our min. target, if you use higher sdk, weak linking happens
OSX/cmake-2.8-10: just reorder, now sdk must be set before deployment target
2012-11-11 18:04:12 +01:00
endif()
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 17:21:48 +01:00
Restore my work overwritten by 52106 and some further reordering for cmake 2.8.10, todo: take into account missing symlinks for Library and /usr/local in newest xcode, affects ndof and jack
2012-11-11 19:06:10 +01:00
if(NOT ${CMAKE_GENERATOR} MATCHES "Xcode")
# force CMAKE_OSX_DEPLOYMENT_TARGET for makefiles, will not work else ( cmake bug ? )
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mmacosx-version-min=${CMAKE_OSX_DEPLOYMENT_TARGET}")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mmacosx-version-min=${CMAKE_OSX_DEPLOYMENT_TARGET}")
remove WITH_AVX_CPU, also used add_definitions incorrectly. single cflags can be added manually and don't need their own options.
2013-05-19 18:47:41 +02:00
add_definitions("-DMACOSX_DEPLOYMENT_TARGET=${CMAKE_OSX_DEPLOYMENT_TARGET}")
Restore my work overwritten by 52106 and some further reordering for cmake 2.8.10, todo: take into account missing symlinks for Library and /usr/local in newest xcode, affects ndof and jack
2012-11-11 19:06:10 +01:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
option(WITH_LIBS10.5 "Use 10.5 libs (needed for 64bit builds)" OFF)
endif()
CMake: - WITH_LCMS added option, was supported in scons. - commented web plugin option since its not maintained. - some formatting changes and removed includes that are not needed for source/creator/CMakeLists.txt.
2010-06-06 15:32:58 +02:00
print warning when release/datafiles/locale is missing when building with cmake (git-svn causes this).
2012-03-13 23:27:21 +01:00
don't write file history in backgound mode (running ctest would overwrite all my recent-files.txt), and add an error about mingw/quicktime being unsupported.
2011-06-08 03:53:12 +02:00
#-----------------------------------------------------------------------------
# Check for conflicting/unsupported configurations
Cycles / Standalone: * Rename test to standalone. Note: New CMAKE flag is WITH_CYCLES_STANDALONE.
2013-08-27 04:37:48 +02:00
if(NOT WITH_BLENDER AND NOT WITH_PLAYER AND NOT WITH_CYCLES_STANDALONE)
CMake: Fix info message for Cycles standalone.
2014-01-18 15:19:49 +01:00
message(FATAL_ERROR "At least one of WITH_BLENDER or WITH_PLAYER or WITH_CYCLES_STANDALONE must be enabled, nothing to do!")
Advanced CMake option to build the player without blender: WITH_BLENDER
2011-07-13 10:15:06 +02:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(NOT WITH_GAMEENGINE AND WITH_PLAYER)
message(FATAL_ERROR "WITH_PLAYER requires WITH_GAMEENGINE")
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
replace BM_edge_face_count with BM_edge_is_manifold/BM_edge_is_wire/BM_edge_is_boundary
2012-11-12 05:50:45 +01:00
if(NOT WITH_AUDASPACE)
if(WITH_OPENAL)
message(FATAL_ERROR "WITH_OPENAL requires WITH_AUDASPACE")
endif()
if(WITH_JACK)
message(FATAL_ERROR "WITH_JACK requires WITH_AUDASPACE")
endif()
if(WITH_GAMEENGINE)
message(FATAL_ERROR "WITH_GAMEENGINE requires WITH_AUDASPACE")
endif()
cmake option to build without an audio library.
2011-06-23 11:27:56 +02:00
endif()
- don't build ghost's event printer unless ghost debug is enabled. - use char rather then STR_String for the event printer. - added option to build WITH_GHOST_DEBUG for cmake - renamed WITH_SDL_GHOST --> WITH_GHOST_SDL
2011-07-13 08:04:54 +02:00
if(NOT WITH_SDL AND WITH_GHOST_SDL)
replace BM_edge_face_count with BM_edge_is_manifold/BM_edge_is_wire/BM_edge_is_boundary
2012-11-12 05:50:45 +01:00
message(FATAL_ERROR "WITH_GHOST_SDL requires WITH_SDL")
build option to use SDL 1.3 for GHOST rather then X11/Win32/Cocoa api's, This opens up the option for blender to be more easily ported to other devices, OS's. TODO - continuous grab. - text glitch with multiple windows (was a bug in X11 too for a while, will check on this)
2011-07-12 15:17:54 +02:00
endif()
disable some conflicting options WITH_PYTHON_MODULE
2011-02-22 15:27:46 +01:00
# python module, needs some different options
if(WITH_PYTHON_MODULE AND WITH_PLAYER)
message(FATAL_ERROR "WITH_PYTHON_MODULE requires WITH_PLAYER to be OFF")
endif()
if(WITH_PYTHON_MODULE AND WITH_PYTHON_INSTALL)
message(FATAL_ERROR "WITH_PYTHON_MODULE requires WITH_PYTHON_INSTALL to be OFF")
endif()
cmake/mingw now builds with default configuration (needed to disable tiff/exr/cycles)
2012-04-12 07:34:17 +02:00
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 16:12:55 +02:00
# may as well build python module without a UI
if(WITH_PYTHON_MODULE)
set(WITH_HEADLESS ON)
endif()
disable cycles when building without python, also use const for function args in more places.
2013-08-08 00:40:03 +02:00
if(NOT WITH_PYTHON)
set(WITH_CYCLES OFF)
endif()
Booleans: Boost is no longer a dependency for Carve SCons is currently broken on my laptop, so can't test if it works for sure, so please do tests of that.
2014-11-13 13:36:33 +01:00
# enable boost for cycles, audaspace or i18n
expose WITH_BOOST as a cmake option, this just disables boost deps since it was becoming annoying to remember all of them.
2013-02-01 00:25:06 +01:00
# otherwise if the user disabled
if(NOT WITH_BOOST)
# Explicitly disabled. so disable all deps.
cmake - warn when an option is turned off because of boost being disabled.
2013-04-29 02:44:33 +02:00
macro(set_and_warn
_setting _val)
if(${${_setting}})
minor adjustment to vertex color baking, tag the meshes directly, no need to do via the objects.
2013-04-29 02:49:44 +02:00
message(STATUS "'WITH_BOOST' is disabled: forceing 'set(${_setting} ${_val})'")
endif()
cmake - warn when an option is turned off because of boost being disabled.
2013-04-29 02:44:33 +02:00
set(${_setting} ${_val})
endmacro()
set_and_warn(WITH_CYCLES OFF)
set_and_warn(WITH_AUDASPACE OFF)
set_and_warn(WITH_INTERNATIONAL OFF)
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
set_and_warn(WITH_OPENVDB OFF)
CMake: Corrections around disabling Boost Were some missing dependencies in the checks.
2016-01-26 15:41:06 +01:00
set_and_warn(WITH_OPENCOLORIO OFF)
set_and_warn(WITH_MOD_BOOLEAN OFF)
cmake - warn when an option is turned off because of boost being disabled.
2013-04-29 02:44:33 +02:00
set_and_warn(WITH_OPENAL OFF) # depends on AUDASPACE
set_and_warn(WITH_GAMEENGINE OFF) # depends on AUDASPACE
CMake: Correction in comment in previous commit
2016-01-26 15:42:53 +01:00
set_and_warn(WITH_PLAYER OFF) # depends on GAMEENGINE
CMake: Corrections around disabling Boost Were some missing dependencies in the checks.
2016-01-26 15:41:06 +01:00
elseif(WITH_CYCLES OR WITH_OPENIMAGEIO OR WITH_AUDASPACE OR WITH_INTERNATIONAL OR WITH_OPENVDB OR WITH_OPENCOLORIO OR WITH_MOD_BOOLEAN)
expose WITH_BOOST as a cmake option, this just disables boost deps since it was becoming annoying to remember all of them.
2013-02-01 00:25:06 +01:00
# Keep enabled
else()
CMake: New dependency graph requires either Boost or C++11
2016-02-19 10:18:38 +01:00
# New dependency graph needs either Boost or C++11 for function bindings.
CMake: use CXX for C++ in var name Follow convention cmake uses.
2016-03-13 05:01:52 +01:00
if(NOT USE_CXX11)
CMake: New dependency graph requires either Boost or C++11
2016-02-19 10:18:38 +01:00
# Enabled but we don't need it
set(WITH_BOOST OFF)
endif()
Cycles: * add some (disabled) test code for using OpenImageIO in imbuf * link cycles, openimageio and boost into blender instead of a shared library * some cmakefile changes to simplify the code and follow conventions better * this may solve running cycles problems on windows XP, or give a different and hopefully more useful error message
2011-08-16 18:15:34 +02:00
endif()
CMake fix: OpenEXR and Tiff are linking dependencies of OIIO, and fix for Boost-Cycles-OIIO order The NOT BOOST test was changing Cycles so should be before the cycles-oiio link (by Campbell Barton, thanks) And exr and tiff are required for oiio (on OSX at least)
2013-03-27 19:44:46 +01:00
# auto enable openimageio for cycles
if(WITH_CYCLES)
set(WITH_OPENIMAGEIO ON)
CMake: minor edits to lite config
2015-06-14 01:34:42 +02:00
# auto enable llvm for cycles_osl
if(WITH_CYCLES_OSL)
set(WITH_LLVM ON CACHE BOOL "" FORCE)
endif()
CMake: disable OSL if cycles is disabled
2015-06-14 01:50:33 +02:00
else()
set(WITH_CYCLES_OSL OFF)
CMake fix: OpenEXR and Tiff are linking dependencies of OIIO, and fix for Boost-Cycles-OIIO order The NOT BOOST test was changing Cycles so should be before the cycles-oiio link (by Campbell Barton, thanks) And exr and tiff are required for oiio (on OSX at least)
2013-03-27 19:44:46 +01:00
endif()
# auto enable openimageio linking dependencies
if(WITH_OPENIMAGEIO)
set(WITH_IMAGE_OPENEXR ON)
set(WITH_IMAGE_TIFF ON)
endif()
code cleanup: correct spelling
2012-09-28 08:45:20 +02:00
# don't store paths to libs for portable distribution
cmake: skip rpath (paths to libs) for portable distrobution
2011-08-23 22:19:08 +02:00
if(WITH_INSTALL_PORTABLE)
set(CMAKE_SKIP_BUILD_RPATH TRUE)
endif()
WITH_GHOST_SDL working again (missing std:: update)
2012-03-13 15:28:58 +01:00
if(WITH_GHOST_SDL OR WITH_HEADLESS)
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
set(WITH_X11 OFF)
set(WITH_X11_XINPUT OFF)
use the format attribute in more places, disable X11 options when building with GHOST_SDL
2012-09-16 12:39:19 +02:00
set(WITH_X11_XF86VMODE OFF)
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
set(WITH_GHOST_XDND OFF)
Disable IME for headless builds
2015-03-20 17:02:09 +01:00
set(WITH_INPUT_IME OFF)
WITH_GHOST_SDL working again (missing std:: update)
2012-03-13 15:28:58 +01:00
endif()
CMake: Add a flag to explicitly disable SSE/SSE2 intrinsics The flag is called WITH_CPU_SSE, it is ON by default so no one should be affected by the change really. This should hopefully fix https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=763755
2014-10-15 10:53:12 +02:00
if(WITH_CPU_SSE)
TEST_SSE_SUPPORT(COMPILER_SSE_FLAG COMPILER_SSE2_FLAG)
else()
message(STATUS "SSE and SSE2 optimizations are DISABLED!")
set(COMPILER_SSE_FLAG)
set(COMPILER_SSE2_FLAG)
endif()
print warning when release/datafiles/locale is missing when building with cmake (git-svn causes this).
2012-03-13 23:27:21 +01:00
CMake: Avoid call of find_package(Git) for every compile with buildinfo enabled This is a bit tricky, find_package(Git) was only used to check if git is installed and actual git command was assumed to be in the PATH (while ideally it should have been GIT_COMMAND variable). This commit makes re-compile output cleaner, especially when using Ninja. Adding proper GIT_COMMAND to buildinfo.cmake is also possible via argument. Reviewers: campbellbarton Reviewed By: campbellbarton Differential Revision: https://developer.blender.org/D1847
2016-03-11 09:05:44 +01:00
if(WITH_BUILDINFO)
find_package(Git)
if(NOT GIT_FOUND)
CMake: Warn when buildinfo is disabled due to missing Git
2016-03-11 10:49:23 +01:00
message(WARNING "Git was not found, disabling WITH_BUILDINFO")
CMake: Avoid call of find_package(Git) for every compile with buildinfo enabled This is a bit tricky, find_package(Git) was only used to check if git is installed and actual git command was assumed to be in the PATH (while ideally it should have been GIT_COMMAND variable). This commit makes re-compile output cleaner, especially when using Ninja. Adding proper GIT_COMMAND to buildinfo.cmake is also possible via argument. Reviewers: campbellbarton Reviewed By: campbellbarton Differential Revision: https://developer.blender.org/D1847
2016-03-11 09:05:44 +01:00
set(WITH_BUILDINFO OFF)
endif()
endif()
CMake: De-duplicate checks around unordered maps and shared pointer Previously several areas were calling TEST_SHARED_PTR_SUPPORT and TEST_UNORDERED_MAP_SUPPORT which isn't that bad on it's own but was causing some quite verbose output with same information line printed multiple times. additionally, what's more worse, define flags for Ceres were duplicated in main CMakeLists and Ceres's CMakeLists. Now we've got a single place where checks for those classes are happening and other areas are simply checking for variables set by those check macros, keeping CMake output clean and nice.
2016-01-14 08:38:46 +01:00
TEST_SHARED_PTR_SUPPORT()
TEST_UNORDERED_MAP_SUPPORT()
Audaspace: fixing problems for the merge to master suggested by Campbell and Sergey. - rename WITH_EXTERNAL_AUDASPACE to WITH_SYSTEM_AUDASPACE. - rename C/PYAUDASPACE to AUDASPACE_C/PY - simplifying cmake defines and includes. - fixing include paths and enabling WITH_SYSTEM_AUDASPACE for windows. - fixing scons building. - other minor build system fixes.
2015-06-16 10:03:35 +02:00
if(WITH_AUDASPACE)
if(WITH_SYSTEM_AUDASPACE)
Audaspace: fixes for building with Quicktime on Mac.
2015-07-29 16:12:46 +02:00
set(AUDASPACE_DEFINITIONS
-DWITH_AUDASPACE
-DWITH_SYSTEM_AUDASPACE
"-DAUD_DEVICE_H=<AUD_Device.h>"
"-DAUD_SPECIAL_H=<AUD_Special.h>"
"-DAUD_SOUND_H=<AUD_Sound.h>"
"-DAUD_HANDLE_H=<AUD_Handle.h>"
"-DAUD_SEQUENCE_H=<AUD_Sequence.h>"
"-DAUD_TYPES_H=<AUD_Types.h>"
"-DAUD_PYTHON_H=<python/PyAPI.h>"
)
Audaspace: fixing problems for the merge to master suggested by Campbell and Sergey. - rename WITH_EXTERNAL_AUDASPACE to WITH_SYSTEM_AUDASPACE. - rename C/PYAUDASPACE to AUDASPACE_C/PY - simplifying cmake defines and includes. - fixing include paths and enabling WITH_SYSTEM_AUDASPACE for windows. - fixing scons building. - other minor build system fixes.
2015-06-16 10:03:35 +02:00
else()
set(AUDASPACE_C_INCLUDE_DIRS "${CMAKE_SOURCE_DIR}/intern/audaspace/intern")
set(AUDASPACE_PY_INCLUDE_DIRS "${CMAKE_SOURCE_DIR}/intern/audaspace/intern")
Audaspace: fixes for building with Quicktime on Mac.
2015-07-29 16:12:46 +02:00
set(AUDASPACE_DEFINITIONS
-DWITH_AUDASPACE
"-DAUD_DEVICE_H=<AUD_C-API.h>"
"-DAUD_SPECIAL_H=<AUD_C-API.h>"
"-DAUD_SOUND_H=<AUD_C-API.h>"
"-DAUD_HANDLE_H=<AUD_C-API.h>"
"-DAUD_SEQUENCE_H=<AUD_C-API.h>"
"-DAUD_TYPES_H=<AUD_Space.h>"
)
Audaspace: fixing problems for the merge to master suggested by Campbell and Sergey. - rename WITH_EXTERNAL_AUDASPACE to WITH_SYSTEM_AUDASPACE. - rename C/PYAUDASPACE to AUDASPACE_C/PY - simplifying cmake defines and includes. - fixing include paths and enabling WITH_SYSTEM_AUDASPACE for windows. - fixing scons building. - other minor build system fixes.
2015-06-16 10:03:35 +02:00
endif()
endif()
documentation edit to address bmesh py api bug [#30453] warn when addons are not found when running cmake.
2012-03-14 01:30:20 +01:00
#-----------------------------------------------------------------------------
# Check for valid directories
Code cleanup: remove references to svn and code style
2014-01-28 13:00:28 +01:00
# ... a partial checkout may cause this.
CMake: disable international if the locale path is empty This would happen when the submodules weren't initialized but fail on `make install` with a not very helpful message.
2014-02-15 21:53:53 +01:00
#
# note: we need to check for a known subdir in both cases.
# since uninitialized git submodules will give blank dirs
documentation edit to address bmesh py api bug [#30453] warn when addons are not found when running cmake.
2012-03-14 01:30:20 +01:00
if(WITH_INTERNATIONAL)
CMake: disable international if the locale path is empty This would happen when the submodules weren't initialized but fail on `make install` with a not very helpful message.
2014-02-15 21:53:53 +01:00
if(NOT EXISTS "${CMAKE_SOURCE_DIR}/release/datafiles/locale/languages")
documentation edit to address bmesh py api bug [#30453] warn when addons are not found when running cmake.
2012-03-14 01:30:20 +01:00
message(WARNING "Translation path '${CMAKE_SOURCE_DIR}/release/datafiles/locale' is missing, "
Code cleanup: remove references to svn and code style
2014-01-28 13:00:28 +01:00
"This is a 'git submodule', which are known not to work with bridges to other version "
documentation edit to address bmesh py api bug [#30453] warn when addons are not found when running cmake.
2012-03-14 01:30:20 +01:00
"control systems, disabling 'WITH_INTERNATIONAL'.")
set(WITH_INTERNATIONAL OFF)
endif()
endif()
if(WITH_PYTHON)
CMake: disable international if the locale path is empty This would happen when the submodules weren't initialized but fail on `make install` with a not very helpful message.
2014-02-15 21:53:53 +01:00
if(NOT EXISTS "${CMAKE_SOURCE_DIR}/release/scripts/addons/modules")
documentation edit to address bmesh py api bug [#30453] warn when addons are not found when running cmake.
2012-03-14 01:30:20 +01:00
message(WARNING "Addons path '${CMAKE_SOURCE_DIR}/release/scripts/addons' is missing, "
Code cleanup: remove references to svn and code style
2014-01-28 13:00:28 +01:00
"This is a 'git submodule', which are known not to work with bridges to other version "
documentation edit to address bmesh py api bug [#30453] warn when addons are not found when running cmake.
2012-03-14 01:30:20 +01:00
"control systems: * CONTINUING WITHOUT ADDONS *")
endif()
endif()
cmake was using dna source list with the variable out of scope, possibly causing dependency problems.
2011-02-22 07:23:07 +01:00
#-----------------------------------------------------------------------------
# Initialize un-cached vars, avoid unused warning
build python module without binreloc, add dummy argv[0] to initialize bprogname.
2011-02-21 14:13:08 +01:00
# linux only, not cached
set(WITH_BINRELOC OFF)
formatting edits only
2011-09-30 17:51:58 +02:00
# MAXOSX only, set to avoid uninitialized
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 21:52:33 +02:00
set(EXETYPE "")
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
# C/C++ flags
set(PLATFORM_CFLAGS)
cmake: correct uninitialized vars
2011-06-14 02:24:50 +02:00
cmake was using dna source list with the variable out of scope, possibly causing dependency problems.
2011-02-22 07:23:07 +01:00
# these are added to later on.
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
set(C_WARNINGS)
set(CXX_WARNINGS)
correct flags for older GCC's which dont suppport -Wno-deprecated-declarations, detect if the flag is supported before use
2011-10-30 05:48:00 +01:00
# for gcc -Wno-blah-blah
set(CC_REMOVE_STRICT_FLAGS)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
# libraries to link the binary with passed to target_link_libraries()
# known as LLIBS to scons
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 21:52:33 +02:00
set(PLATFORM_LINKLIBS "")
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
# Added to linker flags in setup_liblinks
# - CMAKE_EXE_LINKER_FLAGS
# - CMAKE_EXE_LINKER_FLAGS_DEBUG
cmake: - fix for cmake's SSE detection which would fail because of strict warnings and also had redundant cache setting. - was incorrectly initializing variables (own bad) - python was searching for libs on every run, now only do this if there not cached.
2011-10-01 21:52:33 +02:00
set(PLATFORM_LINKFLAGS "")
set(PLATFORM_LINKFLAGS_DEBUG "")
cmake was using dna source list with the variable out of scope, possibly causing dependency problems.
2011-02-22 07:23:07 +01:00
CMake: Provide better control over Python versions and library locations for both Mac and Unix and add to documentation
2006-12-06 09:52:43 +01:00
# For alternate Python locations the commandline can be used to override detected/default cache settings, e.g:
formatting edits only
2011-09-30 17:51:58 +02:00
# On Unix:
- correct python3.1 warning message. - for new shadow only enum, use humanly readable RNA enum values. - update cmake unix example for custom python.
2011-03-08 23:11:15 +01:00
# cmake ../blender \
CMake/SCons: set Python to 3.5
2015-11-27 07:24:11 +01:00
# -D PYTHON_VERSION=3.5 \
missed last commit
2015-11-27 08:00:02 +01:00
# -D PYTHON_INCLUDE_DIR=/opt/py35/include/python3.5d \
# -D PYTHON_LIBRARY=/opt/py35/lib/libpython3.5d.so
- correct python3.1 warning message. - for new shadow only enum, use humanly readable RNA enum values. - update cmake unix example for custom python.
2011-03-08 23:11:15 +01:00
#
formatting edits only
2011-09-30 17:51:58 +02:00
# On Macs:
- correct python3.1 warning message. - for new shadow only enum, use humanly readable RNA enum values. - update cmake unix example for custom python.
2011-03-08 23:11:15 +01:00
# cmake ../blender \
CMake/SCons: set Python to 3.5
2015-11-27 07:24:11 +01:00
# -D PYTHON_INCLUDE_DIR=/System/Library/Frameworks/Python.framework/Versions/3.5/include/python3.5 \
# -D PYTHON_LIBPATH=/System/Library/Frameworks/Python.framework/Versions/3.5/lib/python3.5/config \
- correct python3.1 warning message. - for new shadow only enum, use humanly readable RNA enum values. - update cmake unix example for custom python.
2011-03-08 23:11:15 +01:00
# -G Xcode
CMake: Provide better control over Python versions and library locations for both Mac and Unix and add to documentation
2006-12-06 09:52:43 +01:00
#
== docs == - moved files in proper directories and adapted paths where needed - deleted doc/oldbugs.txt (asked confirmation to jesterking a week ago in irc) - still working on doxygen files, for now I'll leave them in doc/ - NOTE: while checking if other files were referring to these files, I noted that "GPL-license.txt" is also used in the files below: - release/windows/installer/00.sconsblender.nsi - release/windows/specific.sh but these files should't be affected by this commit, but please check :)
2010-10-13 16:44:22 +02:00
# When changing any of this remember to update the notes in doc/build_systems/cmake.txt
CMake: Provide better control over Python versions and library locations for both Mac and Unix and add to documentation
2006-12-06 09:52:43 +01:00
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#-----------------------------------------------------------------------------
#Platform specifics
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
if(WITH_X11)
find_package(X11 REQUIRED)
find_path(X11_XF86keysym_INCLUDE_PATH X11/XF86keysym.h ${X11_INC_SEARCH_PATH})
mark_as_advanced(X11_XF86keysym_INCLUDE_PATH)
list(APPEND PLATFORM_LINKLIBS ${X11_X11_LIB})
if(WITH_X11_XINPUT)
if(X11_Xinput_LIB)
list(APPEND PLATFORM_LINKLIBS ${X11_Xinput_LIB})
else()
set(WITH_X11_XINPUT OFF)
endif()
endif()
if(WITH_X11_XF86VMODE)
# XXX, why dont cmake make this available?
find_library(X11_Xxf86vmode_LIB Xxf86vm ${X11_LIB_SEARCH_PATH})
mark_as_advanced(X11_Xxf86vmode_LIB)
if(X11_Xxf86vmode_LIB)
list(APPEND PLATFORM_LINKLIBS ${X11_Xxf86vmode_LIB})
else()
set(WITH_X11_XF86VMODE OFF)
endif()
endif()
endif()
CMake: modify recent platform defaults Now only disable Jack and NDof on OSX Also comment main block for platform checks
2015-07-28 09:47:21 +02:00
# ----------------------------------------------------------------------------
# Main Platform Checks
#
# - UNIX
# - WIN32
# - APPLE
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(UNIX AND NOT APPLE)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
macro(find_package_wrapper)
dont use 'if(${WITH_STATIC_LIBS})', no need to expend the variable.
2013-06-19 13:26:11 +02:00
if(WITH_STATIC_LIBS)
Buildbot: Initial work to move linux build environment to CMake This is so called "seems to work in dry tests" commit which is aimed to switch linux release environment to CMake. Some notes: - There's no special handle of libstdc++, but it wasn't really static for quite some time in SCons configuration and nobody really complained. - It was quite tricky to get OpenMP linked statically with just using some configuration so we went ahead and added a special option to CMake now which is only exist on Linux and advertised as shouldn't be used. - Packing is happening manually in slave_pack.py. This is because we have to add some really special files to the archive (mesa libraries for example) which we can't really handle from CMake/CPack in a nice generic way. Don't think it's bad approach, at least crappynness is localized and it's not _that_ crappy anyway. - Windows buildbot should keep working, but needs doublechecing. It's just a build folder changed, but you never know what it might imply. - Some further tweaks are likely needed to ensure all builders are working. Thanks Campbell for assistance in this patch!
2015-12-02 14:09:06 +01:00
find_package_static(${ARGV})
else()
find_package(${ARGV})
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
endif()
endmacro()
find_package_wrapper(JPEG REQUIRED)
find_package_wrapper(PNG REQUIRED)
find_package_wrapper(ZLIB REQUIRED)
find_package_wrapper(Freetype REQUIRED)
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
CMake: unbundle LZO library Patch T41989 by @hasufell
2015-03-13 12:33:31 +01:00
if(WITH_LZO AND WITH_SYSTEM_LZO)
find_package_wrapper(LZO)
if(NOT LZO_FOUND)
message(FATAL_ERROR "Failed finding system LZO version!")
endif()
endif()
CMake: unbundle eigen3 Optionally use systems eigen3 library. T41989 by @hasufell with edits
2015-03-19 05:41:41 +01:00
if(WITH_SYSTEM_EIGEN3)
find_package_wrapper(Eigen3)
if(NOT EIGEN3_FOUND)
message(FATAL_ERROR "Failed finding system Eigen3 version!")
endif()
endif()
# else values are set below for all platforms
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
if(WITH_PYTHON)
missed last commit
2015-11-27 08:00:02 +01:00
# No way to set py35, remove for now.
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
# find_package(PythonLibs)
missed last commit
2015-11-27 08:00:02 +01:00
# Use our own instead, since without py is such a rare case,
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
# require this package
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
# XXX Linking errors with debian static python :/
# find_package_wrapper(PythonLibsUnix REQUIRED)
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
find_package(PythonLibsUnix REQUIRED)
endif()
if(WITH_IMAGE_OPENEXR)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(OpenEXR) # our own module
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
if(NOT OPENEXR_FOUND)
set(WITH_IMAGE_OPENEXR OFF)
endif()
endif()
if(WITH_IMAGE_OPENJPEG)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(OpenJPEG)
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
if(NOT OPENJPEG_FOUND)
set(WITH_IMAGE_OPENJPEG OFF)
endif()
endif()
if(WITH_IMAGE_TIFF)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
# XXX Linking errors with debian static tiff :/
# find_package_wrapper(TIFF)
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
find_package(TIFF)
if(NOT TIFF_FOUND)
set(WITH_IMAGE_TIFF OFF)
endif()
endif()
# Audio IO
Audaspace: fixing problems for the merge to master suggested by Campbell and Sergey. - rename WITH_EXTERNAL_AUDASPACE to WITH_SYSTEM_AUDASPACE. - rename C/PYAUDASPACE to AUDASPACE_C/PY - simplifying cmake defines and includes. - fixing include paths and enabling WITH_SYSTEM_AUDASPACE for windows. - fixing scons building. - other minor build system fixes.
2015-06-16 10:03:35 +02:00
if(WITH_SYSTEM_AUDASPACE)
Audaspace: use standalone library. - Added the cmake configuration option WITH_EXTERNAL_AUDASPACE. - Fixes to build without standalone library as well.
2014-03-04 13:44:15 +01:00
find_package_wrapper(Audaspace)
Audaspace: fixing problems for the merge to master suggested by Campbell and Sergey. - rename WITH_EXTERNAL_AUDASPACE to WITH_SYSTEM_AUDASPACE. - rename C/PYAUDASPACE to AUDASPACE_C/PY - simplifying cmake defines and includes. - fixing include paths and enabling WITH_SYSTEM_AUDASPACE for windows. - fixing scons building. - other minor build system fixes.
2015-06-16 10:03:35 +02:00
if(NOT AUDASPACE_FOUND OR NOT AUDASPACE_C_FOUND)
Audaspace: use standalone library. - Added the cmake configuration option WITH_EXTERNAL_AUDASPACE. - Fixes to build without standalone library as well.
2014-03-04 13:44:15 +01:00
message(FATAL_ERROR "Audaspace external library not found!")
endif()
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_OPENAL)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(OpenAL)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(NOT OPENAL_FOUND)
set(WITH_OPENAL OFF)
endif()
endif()
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
if(WITH_SDL)
Support dynamic loading of SDL libraries This is mainly to address old issue when one need to have SDL library installed in order to use our official builds. Some hip distros already installs SDL, but it's not quite the same across all the variety of the distros. We also now switching to SDL-2.0, most of the distros have it in repositories already, so it shouldn't be huge deal to install it if needed. Reviewers: campbellbarton Reviewed By: campbellbarton Differential Revision: https://developer.blender.org/D878
2014-11-17 12:35:36 +01:00
if(WITH_SDL_DYNLOAD)
set(SDL_INCLUDE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/extern/sdlew/include/SDL2")
set(SDL_LIBRARY)
else()
Ensure CMake finds SDL 2.0 CMake 2.8 doesn't search /usr/include/SDL2, which is the include directory for SDL 2.x on Ubuntu Linux (and possibly others). This results in SDL 1.2 headers being found when WITH_SDL_DYNLOAD=OFF, and our shipped SDL 2.0 headers when WITH_SDL_DYNLOAD=ON. This patch ensures that in both cases the correct SDL headers are used. Reviewers: sergey, campbellbarton Projects: #bf_blender Differential Revision: https://developer.blender.org/D1112
2015-02-16 08:22:26 +01:00
find_package_wrapper(SDL2)
if(SDL2_FOUND)
# Use same names for both versions of SDL until we move to 2.x.
set(SDL_INCLUDE_DIR "${SDL2_INCLUDE_DIR}")
set(SDL_LIBRARY "${SDL2_LIBRARY}")
set(SDL_FOUND "${SDL2_FOUND}")
else()
find_package_wrapper(SDL)
endif()
Support dynamic loading of SDL libraries This is mainly to address old issue when one need to have SDL library installed in order to use our official builds. Some hip distros already installs SDL, but it's not quite the same across all the variety of the distros. We also now switching to SDL-2.0, most of the distros have it in repositories already, so it shouldn't be huge deal to install it if needed. Reviewers: campbellbarton Reviewed By: campbellbarton Differential Revision: https://developer.blender.org/D878
2014-11-17 12:35:36 +01:00
mark_as_advanced(
SDL_INCLUDE_DIR
SDL_LIBRARY
)
# unset(SDLMAIN_LIBRARY CACHE)
if(NOT SDL_FOUND)
set(WITH_SDL OFF)
endif()
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
endif()
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_JACK)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(Jack)
cmake: add find jack module
2011-06-19 17:03:50 +02:00
if(NOT JACK_FOUND)
set(WITH_JACK OFF)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
# Codecs
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_CODEC_SNDFILE)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(SndFile)
added FindSndFile cmake module to replace inline checks.
2011-06-18 14:12:19 +02:00
if(NOT SNDFILE_FOUND)
set(WITH_CODEC_SNDFILE OFF)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
if(WITH_CODEC_FFMPEG)
CMakeList: Better handling of llvm under linux (now you can try to force usage of a specific version of llvm before using default one). Also cleared LIBDIR var from linux code, as we have no more those svn folders!
2012-11-18 18:26:23 +01:00
set(FFMPEG /usr CACHE PATH "FFMPEG Directory")
set(FFMPEG_LIBRARIES avformat avcodec avutil avdevice swscale CACHE STRING "FFMPEG Libraries")
CMake/Scons: automatically use ffmpeg, boost and openimageio from the svn lib/ directory if available, which should make building with ffmpeg and cycles easier. If this folder is not available or another path is specified in user-config.py or CMakeCache.txt, this should have no effect. Wiki build instructions now show how to use these. http://wiki.blender.org/index.php/Dev:2.5/Doc/Building_Blender/Linux
2011-11-11 15:52:24 +01:00
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
mark_as_advanced(FFMPEG)
ffmpeg was adding an include `just incase`, without a cmake find module here - just check if the dir exists.
2012-09-20 09:43:48 +02:00
incorrect spelling in comments
2012-09-26 22:05:38 +02:00
# lame, but until we have proper find module for ffmpeg
ffmpeg was adding an include `just incase`, without a cmake find module here - just check if the dir exists.
2012-09-20 09:43:48 +02:00
set(FFMPEG_INCLUDE_DIRS ${FFMPEG}/include)
if(EXISTS "${FFMPEG}/include/ffmpeg/")
fix for cmake constructing an invalid include path.
2012-10-03 07:49:22 +02:00
list(APPEND FFMPEG_INCLUDE_DIRS "${FFMPEG}/include/ffmpeg")
ffmpeg was adding an include `just incase`, without a cmake find module here - just check if the dir exists.
2012-09-20 09:43:48 +02:00
endif()
# end lameness
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
mark_as_advanced(FFMPEG_LIBRARIES)
set(FFMPEG_LIBPATH ${FFMPEG}/lib)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_FFTW3)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(Fftw3)
cmake add module for finding fftw3. also allow debug blender to build with non debug python
2011-06-19 10:57:34 +02:00
if(NOT FFTW3_FOUND)
set(WITH_FFTW3 OFF)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
if(WITH_OPENCOLLADA)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(OpenCOLLADA)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 18:04:35 +02:00
if(OPENCOLLADA_FOUND)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(XML2)
find_package_wrapper(PCRE)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 18:04:35 +02:00
else()
set(WITH_OPENCOLLADA OFF)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
option to link with jemalloc on *nix, off by default.
2011-05-12 13:16:32 +02:00
if(WITH_MEM_JEMALLOC)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(JeMalloc)
cmake: add find jemalloc module
2011-06-19 16:55:51 +02:00
if(NOT JEMALLOC_FOUND)
set(WITH_MEM_JEMALLOC OFF)
endif()
option to link with jemalloc on *nix, off by default.
2011-05-12 13:16:32 +02:00
endif()
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
if(WITH_INPUT_NDOF)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(Spacenav)
more cmake/x11 edits - added includes for spnav - added FindSpacenav.cmake which allows using spacenav from a nonstandard path. - remove NDOF_LIBPATH, use a full library path instead.
2011-08-02 08:32:53 +02:00
if(NOT SPACENAV_FOUND)
set(WITH_INPUT_NDOF OFF)
endif()
# use generic names within blenders buildsystem.
if(SPACENAV_FOUND)
set(NDOF_INCLUDE_DIRS ${SPACENAV_INCLUDE_DIRS})
set(NDOF_LIBRARIES ${SPACENAV_LIBRARIES})
first attempt at CMake fix (untested)
2011-06-28 01:24:24 +02:00
endif()
endif()
Some tweaks to support upcoming OSL-1.6 Doesn't mean we're 100% ready for the transition, but need to start somewhere anyway. Changes: - OSL is no longer supporting cpp and requires usage of Boost Wave. So now Wave component of Boost is optionally demanded when looking for the Boost libraries if OSL is enabled. Only did this for Linux, MSVC seems already using Wave. Not sure about OSX. - Because of the same reason OSL should be moved prior Boost for linker. - Whole archive trick makes it so linking fails with duplicated symbols, so removed it for the new OSL. Didn't see issues with this so far. - Added some code to check OSL version on Linux. Would need to move all that to FindOpenShadingLanguage.cmake which we can get from Cycles standalone repository. So in theory no affect on current stup would be made at all. - Added some tweaks to buildbot files. It now seems to be happy with the new OSL libraries, but again, those tweaks are not in action yet. All this was tested on Linux only. Win/OSX might still need some tweaks to support new OSL. P.S. This doesn't mean we're pushing OSL update yet, just making some preliminary tweaks to avoid entropy of PITA when we'll actually want to switch.
2015-02-06 10:51:14 +01:00
if(WITH_CYCLES_OSL)
set(CYCLES_OSL ${LIBDIR}/osl CACHE PATH "Path to OpenShadingLanguage installation")
CMake cleanup: Move OSL detection code into FindOpenShadingLanguage.cmake Should be no functional changes.
2015-02-09 22:39:00 +01:00
if(NOT OSL_ROOT)
set(OSL_ROOT ${CYCLES_OSL})
Some tweaks to support upcoming OSL-1.6 Doesn't mean we're 100% ready for the transition, but need to start somewhere anyway. Changes: - OSL is no longer supporting cpp and requires usage of Boost Wave. So now Wave component of Boost is optionally demanded when looking for the Boost libraries if OSL is enabled. Only did this for Linux, MSVC seems already using Wave. Not sure about OSX. - Because of the same reason OSL should be moved prior Boost for linker. - Whole archive trick makes it so linking fails with duplicated symbols, so removed it for the new OSL. Didn't see issues with this so far. - Added some code to check OSL version on Linux. Would need to move all that to FindOpenShadingLanguage.cmake which we can get from Cycles standalone repository. So in theory no affect on current stup would be made at all. - Added some tweaks to buildbot files. It now seems to be happy with the new OSL libraries, but again, those tweaks are not in action yet. All this was tested on Linux only. Win/OSX might still need some tweaks to support new OSL. P.S. This doesn't mean we're pushing OSL update yet, just making some preliminary tweaks to avoid entropy of PITA when we'll actually want to switch.
2015-02-06 10:51:14 +01:00
endif()
CMake cleanup: Move OSL detection code into FindOpenShadingLanguage.cmake Should be no functional changes.
2015-02-09 22:39:00 +01:00
find_package_wrapper(OpenShadingLanguage)
if(OSL_FOUND)
if(${OSL_LIBRARY_VERSION_MAJOR} EQUAL "1" AND ${OSL_LIBRARY_VERSION_MINOR} LESS "6")
# Note: --whole-archive is needed to force loading of all symbols in liboslexec,
# otherwise LLVM is missing the osl_allocate_closure_component function
set(OSL_LIBRARIES ${OSL_OSLCOMP_LIBRARY} -Wl,--whole-archive ${OSL_OSLEXEC_LIBRARY} -Wl,--no-whole-archive ${OSL_OSLQUERY_LIBRARY})
endif()
Some tweaks to support upcoming OSL-1.6 Doesn't mean we're 100% ready for the transition, but need to start somewhere anyway. Changes: - OSL is no longer supporting cpp and requires usage of Boost Wave. So now Wave component of Boost is optionally demanded when looking for the Boost libraries if OSL is enabled. Only did this for Linux, MSVC seems already using Wave. Not sure about OSX. - Because of the same reason OSL should be moved prior Boost for linker. - Whole archive trick makes it so linking fails with duplicated symbols, so removed it for the new OSL. Didn't see issues with this so far. - Added some code to check OSL version on Linux. Would need to move all that to FindOpenShadingLanguage.cmake which we can get from Cycles standalone repository. So in theory no affect on current stup would be made at all. - Added some tweaks to buildbot files. It now seems to be happy with the new OSL libraries, but again, those tweaks are not in action yet. All this was tested on Linux only. Win/OSX might still need some tweaks to support new OSL. P.S. This doesn't mean we're pushing OSL update yet, just making some preliminary tweaks to avoid entropy of PITA when we'll actually want to switch.
2015-02-06 10:51:14 +01:00
else()
CMake cleanup: Move OSL detection code into FindOpenShadingLanguage.cmake Should be no functional changes.
2015-02-09 22:39:00 +01:00
message(STATUS "OSL not found, disabling it from Cycles")
Some tweaks to support upcoming OSL-1.6 Doesn't mean we're 100% ready for the transition, but need to start somewhere anyway. Changes: - OSL is no longer supporting cpp and requires usage of Boost Wave. So now Wave component of Boost is optionally demanded when looking for the Boost libraries if OSL is enabled. Only did this for Linux, MSVC seems already using Wave. Not sure about OSX. - Because of the same reason OSL should be moved prior Boost for linker. - Whole archive trick makes it so linking fails with duplicated symbols, so removed it for the new OSL. Didn't see issues with this so far. - Added some code to check OSL version on Linux. Would need to move all that to FindOpenShadingLanguage.cmake which we can get from Cycles standalone repository. So in theory no affect on current stup would be made at all. - Added some tweaks to buildbot files. It now seems to be happy with the new OSL libraries, but again, those tweaks are not in action yet. All this was tested on Linux only. Win/OSX might still need some tweaks to support new OSL. P.S. This doesn't mean we're pushing OSL update yet, just making some preliminary tweaks to avoid entropy of PITA when we'll actually want to switch.
2015-02-06 10:51:14 +01:00
set(WITH_CYCLES_OSL OFF)
endif()
endif()
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
if(WITH_OPENVDB)
find_package_wrapper(OpenVDB)
OpenVDB: Get rid of hardcoded TBB variables and enabled for Linux buildbot
2016-01-27 12:26:26 +01:00
find_package_wrapper(TBB)
if(NOT OPENVDB_FOUND OR NOT TBB_FOUND)
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
set(WITH_OPENVDB OFF)
set(WITH_OPENVDB_BLOSC OFF)
OpenVDB: Get rid of hardcoded TBB variables and enabled for Linux buildbot
2016-01-27 12:26:26 +01:00
message(STATUS "OpenVDB not found, disabling it")
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
endif()
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
if(WITH_BOOST)
Cycles: cmake tweaks for linux build, instructions on the wiki no longer worked.
2011-11-08 22:40:08 +01:00
# uses in build instructions to override include and library variables
if(NOT BOOST_CUSTOM)
dont use 'if(${WITH_STATIC_LIBS})', no need to expend the variable.
2013-06-19 13:26:11 +02:00
if(WITH_STATIC_LIBS)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
set(Boost_USE_STATIC_LIBS ON)
endif()
CMake: on linux, make boost now always require multithreaded libs, disabling this was a hack for the precompiled libs in svn. Also bumped minimum version to 1.48 because that's the first version that contains boost::locale.
2012-12-13 09:46:07 +01:00
set(Boost_USE_MULTITHREADED ON)
Another nuch of fixes/improvements to install_deps script, among which: *New $INST variable to easily change the installation root dir of compiled libs. *Better handling of versions for debian (DEB) too (and fix a bug for fedora (RPM) ones). *Enhancements/fixes to compile_FOO funcs: **Most notable, we now can force a recompile when we change something into these funcs, so user will always have latest-instructions compiled libs (else, he would have have to manually remove lib dirs under $INST...) *General naming cleanup inside script (still wip). Also adding boost date_time lib to linux in cmake file (why wasn't it there???).
2012-11-15 18:31:18 +01:00
set(__boost_packages filesystem regex system thread date_time)
Some tweaks to support upcoming OSL-1.6 Doesn't mean we're 100% ready for the transition, but need to start somewhere anyway. Changes: - OSL is no longer supporting cpp and requires usage of Boost Wave. So now Wave component of Boost is optionally demanded when looking for the Boost libraries if OSL is enabled. Only did this for Linux, MSVC seems already using Wave. Not sure about OSX. - Because of the same reason OSL should be moved prior Boost for linker. - Whole archive trick makes it so linking fails with duplicated symbols, so removed it for the new OSL. Didn't see issues with this so far. - Added some code to check OSL version on Linux. Would need to move all that to FindOpenShadingLanguage.cmake which we can get from Cycles standalone repository. So in theory no affect on current stup would be made at all. - Added some tweaks to buildbot files. It now seems to be happy with the new OSL libraries, but again, those tweaks are not in action yet. All this was tested on Linux only. Win/OSX might still need some tweaks to support new OSL. P.S. This doesn't mean we're pushing OSL update yet, just making some preliminary tweaks to avoid entropy of PITA when we'll actually want to switch.
2015-02-06 10:51:14 +01:00
if(WITH_CYCLES_OSL)
if(NOT (${OSL_LIBRARY_VERSION_MAJOR} EQUAL "1" AND ${OSL_LIBRARY_VERSION_MINOR} LESS "6"))
list(APPEND __boost_packages wave)
else()
endif()
endif()
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
if(WITH_INTERNATIONAL)
Replacing gettext i18n backend by boost::locale one. This commit adds a small and simplistic C wrapper around boost's locale library as intern/locale, and heavily simplifies/reduces Blender's own i18n code (under blenfont/ dir). And it adds back UI translation on windows' official builds (with msvc)! Note to platform maintainers: iconv and gettext (libintl) can now be removed from precompiled libs (not gettext binaries, under windows, of course ;) ). Note to MinGW32/64 users: boost_locale lib has not yet been uploaded for those build env, please disable WITH_INTERNATIONAL for now (hopefully will be fixed very soon, have contacted psy-fy).
2012-11-11 17:54:26 +01:00
list(APPEND __boost_packages locale)
endif()
Cycles: network render code updated for latest changes and improved This actually works somewhat now, although viewport rendering is broken and any kind of network error or connection failure will kill Blender. * Experimental WITH_CYCLES_NETWORK cmake option * Networked Device is shown as an option next to CPU and GPU Compute * Various updates to work with the latest Cycles code * Locks and thread safety for RPC calls and tiles * Refactored pointer mapping code * Fix error in CPU brand string retrieval code This includes work by Doug Gale, Martijn Berger and Brecht Van Lommel. Reviewers: brecht Differential Revision: http://developer.blender.org/D36
2013-12-07 02:29:53 +01:00
if(WITH_CYCLES_NETWORK)
list(APPEND __boost_packages serialization)
endif()
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
if(WITH_OPENVDB)
list(APPEND __boost_packages iostreams)
endif()
CMake: on linux, make boost now always require multithreaded libs, disabling this was a hack for the precompiled libs in svn. Also bumped minimum version to 1.48 because that's the first version that contains boost::locale.
2012-12-13 09:46:07 +01:00
find_package(Boost 1.48 COMPONENTS ${__boost_packages})
CMake: attempt to fix Boost detection on Fedora 20, which omits -mt.
2013-12-23 16:52:34 +01:00
if(NOT Boost_FOUND)
# try to find non-multithreaded if -mt not found, this flag
# doesn't matter for us, it has nothing to do with thread
# safety, but keep it to not disturb build setups
set(Boost_USE_MULTITHREADED OFF)
find_package(Boost 1.48 COMPONENTS ${__boost_packages})
endif()
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
unset(__boost_packages)
Rename CMake's Boost_USE_ICU to WITH_BOOST_ICU (update your CMake conf if you make static builds!), and add it as CMake option. Patch by gdh (Gavin Howard), many thanks!
2013-02-23 21:42:15 +01:00
if(Boost_USE_STATIC_LIBS AND WITH_BOOST_ICU)
Fix when statically linking with distro's boost: in this case, we most likely also need to statically link against icu, as most boost packages are built with it. Without that, you get a bunch of errors at link time (when using boost_locale, or, in freestyle branch, boost_regex). So when you enable Boost_USE_STATIC_LIBS, you should also set Boost_USE_ICU to True. Will add a note about that in build doc too.
2012-11-19 09:51:35 +01:00
find_package(IcuLinux)
endif()
presets now work from non-redo popups, ended up having to add a new pointer into the uiBlock (which I'd rather have avoided), but setting the uiLayoutSetContextPointer(..) was complicated to properly use for submenus and popus.
2011-11-10 04:44:50 +01:00
mark_as_advanced(Boost_DIR) # why doesnt boost do this?
Cycles: cmake tweaks for linux build, instructions on the wiki no longer worked.
2011-11-08 22:40:08 +01:00
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
set(BOOST_INCLUDE_DIR ${Boost_INCLUDE_DIRS})
set(BOOST_LIBRARIES ${Boost_LIBRARIES})
set(BOOST_LIBPATH ${Boost_LIBRARY_DIRS})
set(BOOST_DEFINITIONS "-DBOOST_ALL_NO_LIB")
endif()
if(WITH_OPENIMAGEIO)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(OpenImageIO)
Cycles: Fix compilation error when OIIO is compiled with external PugiXML parser Basic idea is to check whether OIIO is compiled with embedded PugiXML parser and if so use PugiXML from OIIO, otherwise find a standalone PugiXML library.
2014-11-15 18:56:22 +01:00
if(NOT OPENIMAGEIO_PUGIXML_FOUND AND WITH_CYCLES_STANDALONE)
find_package_wrapper(PugiXML)
else()
set(PUGIXML_INCLUDE_DIR "${OPENIMAGEIO_INCLUDE_DIR/OpenImageIO}")
set(PUGIXML_LIBRARIES "")
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
only use tiff/exr when enabled.
2012-06-05 00:34:28 +02:00
set(OPENIMAGEIO_LIBRARIES ${OPENIMAGEIO_LIBRARIES} ${PNG_LIBRARIES} ${JPEG_LIBRARIES} ${ZLIB_LIBRARIES} ${BOOST_LIBRARIES})
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
set(OPENIMAGEIO_LIBPATH) # TODO, remove and reference the absolute path everywhere
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
set(OPENIMAGEIO_DEFINITIONS "")
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
only use tiff/exr when enabled.
2012-06-05 00:34:28 +02:00
if(WITH_IMAGE_TIFF)
correction to own change with cmake, oiio linking.
2012-06-05 08:18:31 +02:00
list(APPEND OPENIMAGEIO_LIBRARIES "${TIFF_LIBRARY}")
only use tiff/exr when enabled.
2012-06-05 00:34:28 +02:00
endif()
if(WITH_IMAGE_OPENEXR)
correction to own change with cmake, oiio linking.
2012-06-05 08:18:31 +02:00
list(APPEND OPENIMAGEIO_LIBRARIES "${OPENEXR_LIBRARIES}")
only use tiff/exr when enabled.
2012-06-05 00:34:28 +02:00
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
if(NOT OPENIMAGEIO_FOUND)
set(WITH_OPENIMAGEIO OFF)
Cycles Merge Documentation: http://wiki.blender.org/index.php/Dev:2.6/Source/Render/Cycles http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles Cycles is available is an extra render engine from the top header. It's not feature complete, consider this as a first preview release. Known bugs: http://wiki.blender.org/index.php/Dev:2.6/Source/Render/Cycles/KnownIssues Building currently only works with CMake, SCons support is being worked on and should be available soon. Also missing still is precompiled OpenImageIO and Boost for Linux, these will be added later in lib/linux*, if you do not have these installed on your system, Cycles will simply not be available.
2011-11-08 18:00:40 +01:00
message(STATUS "OpenImageIO not found, disabling WITH_CYCLES")
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
endif()
endif()
Color Management, Stage 1: Initial OpenColorIO library integration This commit integrates support of OpenColorIO library into build systems. It also contains C-API for OpenColorIO library which could be used by Blender. CMake has got find rules familiar to OpenImageIO's one which makes it easier for build system to find needed libraries and includes. Scons only could use explicitly defined paths to libraries and includes. C-API would be compiled and Blender would be linked against C-API and OpenColorIO but it wouldn't affect on Blender behavior at all. OpenColorIO could be disabled by setting up WITH_OCIO to Off in CMake and setting WITH_BF_OCIO in Scons.
2012-09-15 12:03:17 +02:00
if(WITH_OPENCOLORIO)
Adding a linux-only WITH_STATIC_LIBS option, which will try to link against static libs. This should help building more portable blender. Still experimental and WIP.
2012-11-19 20:43:03 +01:00
find_package_wrapper(OpenColorIO)
Color Management, Stage 1: Initial OpenColorIO library integration This commit integrates support of OpenColorIO library into build systems. It also contains C-API for OpenColorIO library which could be used by Blender. CMake has got find rules familiar to OpenImageIO's one which makes it easier for build system to find needed libraries and includes. Scons only could use explicitly defined paths to libraries and includes. C-API would be compiled and Blender would be linked against C-API and OpenColorIO but it wouldn't affect on Blender behavior at all. OpenColorIO could be disabled by setting up WITH_OCIO to Off in CMake and setting WITH_BF_OCIO in Scons.
2012-09-15 12:03:17 +02:00
set(OPENCOLORIO_LIBRARIES ${OPENCOLORIO_LIBRARIES})
set(OPENCOLORIO_LIBPATH) # TODO, remove and reference the absolute path everywhere
set(OPENCOLORIO_DEFINITIONS)
if(NOT OPENCOLORIO_FOUND)
set(WITH_OPENCOLORIO OFF)
message(STATUS "OpenColorIO not found")
endif()
endif()
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
if(WITH_LLVM)
Cleanup: whitespace (CMake)
2015-07-18 10:21:17 +02:00
find_package_wrapper(LLVM)
CMake: add LLVM_STATIC as cmake build option, so linux distributions can link LLVM dynamically. Patch by Dan Eicher.
2013-04-15 18:18:35 +02:00
Cleanup: whitespace (CMake)
2015-07-18 10:21:17 +02:00
if(NOT LLVM_FOUND)
[cmake] move FindLLVM to its own file
2015-05-06 12:35:41 +02:00
set(WITH_LLVM OFF)
message(STATUS "LLVM not found")
cmake - cached LLVM values would be overwritten on every execution.
2013-09-25 19:04:01 +02:00
endif()
Support dynamic loading of SDL libraries This is mainly to address old issue when one need to have SDL library installed in order to use our official builds. Some hip distros already installs SDL, but it's not quite the same across all the variety of the distros. We also now switching to SDL-2.0, most of the distros have it in repositories already, so it shouldn't be huge deal to install it if needed. Reviewers: campbellbarton Reviewed By: campbellbarton Differential Revision: https://developer.blender.org/D878
2014-11-17 12:35:36 +01:00
endif()
if(WITH_LLVM OR WITH_SDL_DYNLOAD)
Fix 33149: LLVM caused startup crash on linux systems using Mesa llvmpipe. Now we hide the LLVM symbols with an ld version script to avoid conflicts.
2012-11-21 23:28:15 +01:00
# Fix for conflict with Mesa llvmpipe
CMake: Solve compilation error from path with a space
2015-04-30 09:55:52 +02:00
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -Wl,--version-script='${CMAKE_SOURCE_DIR}/source/creator/blender.map'")
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
endif()
OpenSubdiv: Commit of OpenSubdiv integration into Blender This commit contains all the remained parts needed for initial integration of OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU backends which works in the following way: - When SubSurf modifier is the last in the modifiers stack then GPU pipeline of OpenSubdiv is used, making viewport performance as fast as possible. This also requires graphscard with GLSL 1.5 support. If this requirement is not met, then no GPU pipeline is used at all. - If SubSurf is not a last modifier or if DerivesMesh is being evaluated for rendering then CPU limit evaluation API from OpenSubdiv is used. This only replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG structures exactly the same as they used to be for ages now. This integration is fully covered with ifdef and not enabled by default because there are several TODOs to be solved first: - Face varying data interpolation is not really cleanly implemented for GPU in OpenSubdiv 3.0. It is also not implemented for limit evaluation API. This basically means we'll have really hard time supporting UVs. - Limit evaluation only works with adaptivly subdivided meshes so far, which basically means all the points of CCG are pushed to the limit. This gives different result from old code. - There are some serious optimizations possible on the topology refiner creation, which would speed up initial OpenSubdiv mesh creation. - There are some hardcoded asumptions in the GPU and DerivedMesh areas which could be generalized. That's something where Antony and Campbell can help, making it so the code is structured in a way which is reusable by all planned viewport projects. - There are also some workarounds in the dependency graph to make sure OpenGL buffers are only freed from the main thread. Those who'll be wanting to make experiments with this code should grab dev branch (NOT master) from https://github.com/Nazg-Gul/OpenSubdiv/tree/dev There are some patches applied in there which we're working on on getting into upstream.
2015-07-20 16:08:06 +02:00
if(WITH_OPENSUBDIV)
find_package_wrapper(OpenSubdiv)
set(OPENSUBDIV_LIBRARIES ${OPENSUBDIV_LIBRARIES})
set(OPENSUBDIV_LIBPATH) # TODO, remove and reference the absolute path everywhere
if(NOT OPENSUBDIV_FOUND)
set(WITH_OPENSUBDIV OFF)
Fix typo in cmake when OpenSubdiv is not found
2015-08-06 11:51:18 +02:00
message(STATUS "OpenSubdiv not found")
OpenSubdiv: Commit of OpenSubdiv integration into Blender This commit contains all the remained parts needed for initial integration of OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU backends which works in the following way: - When SubSurf modifier is the last in the modifiers stack then GPU pipeline of OpenSubdiv is used, making viewport performance as fast as possible. This also requires graphscard with GLSL 1.5 support. If this requirement is not met, then no GPU pipeline is used at all. - If SubSurf is not a last modifier or if DerivesMesh is being evaluated for rendering then CPU limit evaluation API from OpenSubdiv is used. This only replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG structures exactly the same as they used to be for ages now. This integration is fully covered with ifdef and not enabled by default because there are several TODOs to be solved first: - Face varying data interpolation is not really cleanly implemented for GPU in OpenSubdiv 3.0. It is also not implemented for limit evaluation API. This basically means we'll have really hard time supporting UVs. - Limit evaluation only works with adaptivly subdivided meshes so far, which basically means all the points of CCG are pushed to the limit. This gives different result from old code. - There are some serious optimizations possible on the topology refiner creation, which would speed up initial OpenSubdiv mesh creation. - There are some hardcoded asumptions in the GPU and DerivedMesh areas which could be generalized. That's something where Antony and Campbell can help, making it so the code is structured in a way which is reusable by all planned viewport projects. - There are also some workarounds in the dependency graph to make sure OpenGL buffers are only freed from the main thread. Those who'll be wanting to make experiments with this code should grab dev branch (NOT master) from https://github.com/Nazg-Gul/OpenSubdiv/tree/dev There are some patches applied in there which we're working on on getting into upstream.
2015-07-20 16:08:06 +02:00
endif()
endif()
revert r32284, turns out OpenSuse needs this for forkpty(), also fixed missing import with 3ds export.
2010-10-04 13:42:39 +02:00
# OpenSuse needs lutil, ArchLinux not, for now keep, can avoid by using --as-needed
CMake: cleanup, use find_package for pthreads
2014-11-15 16:46:30 +01:00
list(APPEND PLATFORM_LINKLIBS -lutil -lc -lm)
find_package(Threads REQUIRED)
list(APPEND PLATFORM_LINKLIBS ${CMAKE_THREAD_LIBS_INIT})
Fix for GTest
2015-01-09 13:31:38 +01:00
# used by other platforms
set(PTHREADS_LIBRARIES ${CMAKE_THREAD_LIBS_INIT})
CMake: cleanup, use find_package for pthreads
2014-11-15 16:46:30 +01:00
if(CMAKE_DL_LIBS)
list(APPEND PLATFORM_LINKLIBS ${CMAKE_DL_LIBS})
endif()
CMake option 'WITH_HEADLESS' to build blender in headless mode (no x11/xlib) with NULL ghost classe.
2011-06-04 16:12:55 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(CMAKE_SYSTEM_NAME MATCHES "Linux")
build python module without binreloc, add dummy argv[0] to initialize bprogname.
2011-02-21 14:13:08 +01:00
if(NOT WITH_PYTHON_MODULE)
# binreloc is linux only
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 16:12:54 +02:00
set(BINRELOC_INCLUDE_DIRS ${CMAKE_SOURCE_DIR}/extern/binreloc/include)
build python module without binreloc, add dummy argv[0] to initialize bprogname.
2011-02-21 14:13:08 +01:00
set(WITH_BINRELOC ON)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
cmake - set configuration specific defines globally rather than mixing in with c/cxx flags
2011-10-26 02:51:29 +02:00
# lfs on glibc, all compilers should use
add_definitions(-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE)
Added better gcc warnings in Cmake.
2009-01-14 17:40:11 +01:00
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 06:32:49 +01:00
# GNU Compiler
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(CMAKE_COMPILER_IS_GNUCC)
set(PLATFORM_CFLAGS "-pipe -fPIC -funsigned-char -fno-strict-aliasing")
Use gnu89 for GCC GCC5 defaults to gnu11, which we may switch to later but disable for now to prevent accidental use.
2015-04-28 10:37:28 +02:00
CMake: use ld.gold linker when available Gives noticeable speedup linking blender
2015-05-02 14:11:29 +02:00
# use ld.gold linker if available, could make optional
execute_process(
COMMAND ${CMAKE_C_COMPILER} -fuse-ld=gold -Wl,--version
ERROR_QUIET OUTPUT_VARIABLE LD_VERSION)
CMake: minor edits
2015-06-30 14:44:27 +02:00
if("${LD_VERSION}" MATCHES "GNU gold")
CMake: use ld.gold linker when available Gives noticeable speedup linking blender
2015-05-02 14:11:29 +02:00
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fuse-ld=gold")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fuse-ld=gold")
CMake: minor edits
2015-06-30 14:44:27 +02:00
else()
message(STATUS "GNU gold linker isn't available, using the default system linker.")
endif()
CMake: use ld.gold linker when available Gives noticeable speedup linking blender
2015-05-02 14:11:29 +02:00
unset(LD_VERSION)
new cmake doesn't consider CLang == GNUCC, set flags for clang explicitly.
2011-08-21 13:06:49 +02:00
# CLang is the same as GCC for now.
CMake: check CMAKE_C_COMPILER_ID instead of CMAKE_CXX_COMPILER_ID While its possible to have different C/C++ compilers, we dont support this at the moment, so just check C compiler ID for now.
2013-12-02 01:36:33 +01:00
elseif(CMAKE_C_COMPILER_ID MATCHES "Clang")
new cmake doesn't consider CLang == GNUCC, set flags for clang explicitly.
2011-08-21 13:06:49 +02:00
set(PLATFORM_CFLAGS "-pipe -fPIC -funsigned-char -fno-strict-aliasing")
Some small fixes to get things compiling on solaris with cmake. There are also some changes that need to be done to libmv but I'm leaving those out so I can get it patched upstream first. (Only works with gcc/g++ if we want to use sun's compiler we would need to get rid of all of our annonymous structs which I don't think we want to do at this point, example: typedef struct wmNDOFMotionData { union { float tvec[3]; // translation struct { float tx, ty, tz; }; // this would need to be fixed // something like this or something similar: struct { float x, y, z; } t; }; ... ) Kent
2012-01-12 17:31:27 +01:00
# Solaris CC
CMake: check CMAKE_C_COMPILER_ID instead of CMAKE_CXX_COMPILER_ID While its possible to have different C/C++ compilers, we dont support this at the moment, so just check C compiler ID for now.
2013-12-02 01:36:33 +01:00
elseif(CMAKE_C_COMPILER_ID MATCHES "SunPro")
Some small fixes to get things compiling on solaris with cmake. There are also some changes that need to be done to libmv but I'm leaving those out so I can get it patched upstream first. (Only works with gcc/g++ if we want to use sun's compiler we would need to get rid of all of our annonymous structs which I don't think we want to do at this point, example: typedef struct wmNDOFMotionData { union { float tvec[3]; // translation struct { float tx, ty, tz; }; // this would need to be fixed // something like this or something similar: struct { float x, y, z; } t; }; ... ) Kent
2012-01-12 17:31:27 +01:00
set(PLATFORM_CFLAGS "-pipe -features=extensions -fPIC -D__FUNCTION__=__func__")
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 06:32:49 +01:00
# Intel C++ Compiler
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
elseif(CMAKE_C_COMPILER_ID MATCHES "Intel")
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 06:32:49 +01:00
# think these next two are broken
formatting edits only
2011-09-30 17:51:58 +02:00
find_program(XIAR xiar)
if(XIAR)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(CMAKE_AR "${XIAR}")
formatting edits only
2011-09-30 17:51:58 +02:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
mark_as_advanced(XIAR)
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 06:32:49 +01:00
formatting edits only
2011-09-30 17:51:58 +02:00
find_program(XILD xild)
if(XILD)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(CMAKE_LINKER "${XILD}")
formatting edits only
2011-09-30 17:51:58 +02:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
mark_as_advanced(XILD)
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 06:32:49 +01:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fp-model precise -prec_div -parallel")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fp-model precise -prec_div -parallel")
patch from Dan Eicher to support intel C++ compiler for CMake on *nix.
2010-11-15 06:32:49 +01:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
# set(PLATFORM_CFLAGS "${PLATFORM_CFLAGS} -diag-enable sc3")
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 10:55:35 +01:00
set(PLATFORM_CFLAGS "-pipe -fPIC -funsigned-char -fno-strict-aliasing")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -static-intel")
endif()
reverting previous commit from Mitchell. His commit went to the trunk instead of the branch :) svn merge -r 29067:29066 https://svn.blender.org/svnroot/bf-blender/trunk/blender
2010-05-29 23:31:57 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
elseif(WIN32)
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
add_definitions(-DWIN32)
if(MSVC)
CMake: check for minimum MSVC version Needed since older versions are unsupported (giving cryptic errors).
2016-02-24 21:31:44 +01:00
# Minimum MSVC Version
set(_min_ver "18.0.31101")
if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS ${_min_ver})
message(FATAL_ERROR
"Visual Studio 2013 (Update 4, ${_min_ver}) required, "
"found (${CMAKE_CXX_COMPILER_VERSION})")
endif()
unset(_min_ver)
Drop support for MSVC versions older then 2013 with CMake We get too many complaints about breakage and we intend to drop older versions soon anyway.
2014-05-05 21:03:19 +02:00
CMake/MSVC: use '/SAFESEH:NO' linker flag, needed for some systens (D682)
2014-07-27 05:50:21 +02:00
# needed for some MSVC installations
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /SAFESEH:NO")
set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} /SAFESEH:NO")
set(CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} /SAFESEH:NO")
Windows: Add stacktrace support when unhandled exception occurs. We need to register the exception handler slightly differently here, as well as adding DbgHelp as a library, but according to docs it should be supported in recent Windows editions (Win XP included even). We can try it first and revert if there are issues.
2015-03-03 13:39:15 +01:00
list(APPEND PLATFORM_LINKLIBS ws2_32 vfw32 winmm kernel32 user32 gdi32 comdlg32 advapi32 shfolder shell32 ole32 oleaut32 uuid psapi Dbghelp)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
Input Method Editor (IME) support for text buttons Original patch by @random (D765) with some minor work done by @campbell and me. At this place, I'd like call out a number of people who were involved and deserve a big "Thank you!": * At the first place @randon who developed and submitted the patch * The Blendercn community which helped a lot with testing - espacially * @yuzukyo, @leon_cheung and @kjym3 * @campbellbarton, @mont29 and @sergey for their help and advises during * review * @ton who realized the importance of this early on and asked me for * reviewing We are still not finished, as this is only the first part of the implementaion, but there's more to come!
2014-12-07 00:58:17 +01:00
if(WITH_INPUT_IME)
list(APPEND PLATFORM_LINKLIBS imm32)
endif()
CMake: add _WIN32_WINNT MSVC define to match scons
2014-02-24 23:56:55 +01:00
add_definitions(
-D_CRT_NONSTDC_NO_DEPRECATE
-D_CRT_SECURE_NO_DEPRECATE
-D_SCL_SECURE_NO_DEPRECATE
-D_CONSOLE
-D_LIB
)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
CMake build system update - Extending CMakeLists.txt to support builds with VC2012. - Fix some typo in CMakeLists.txt - Introduces experimental WITH_AVX_CPU to build with /arch:AVX (VC11 only)
2013-05-14 18:16:25 +02:00
# MSVC11 needs _ALLOW_KEYWORD_MACROS to build
Cmake windows/msvc minor cleanup
2014-11-15 12:12:19 +01:00
add_definitions(-D_ALLOW_KEYWORD_MACROS)
CMake: add _WIN32_WINNT MSVC define to match scons
2014-02-24 23:56:55 +01:00
if(CMAKE_CL_64)
# We want to support Vista level ABI for x64
Cmake windows/msvc minor cleanup
2014-11-15 12:12:19 +01:00
add_definitions(-D_WIN32_WINNT=0x600)
CMake build system update - Extending CMakeLists.txt to support builds with VC2012. - Fix some typo in CMakeLists.txt - Introduces experimental WITH_AVX_CPU to build with /arch:AVX (VC11 only)
2013-05-14 18:16:25 +02:00
endif()
Cmake windows/msvc minor cleanup
2014-11-15 12:12:19 +01:00
# Make cmake find the msvc redistributables
Cmake add installation of redistributables for msvc 2013
2014-11-14 10:49:01 +01:00
set(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP TRUE)
include(InstallRequiredSystemLibraries)
CMake: don't overwrite C/C++ flags for MSVC Wasn't possible to define custom build flags. This does change some of the build flags, as far as we can tell they aren't important (see D1615).
2015-11-11 12:53:49 +01:00
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /nologo /J /Gd /MP /EHsc")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /nologo /J /Gd /MP")
set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} /MTd")
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /MTd")
set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} /MT")
set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /MT")
set(CMAKE_CXX_FLAGS_MINSIZEREL "${CMAKE_CXX_FLAGS_MINSIZEREL} /MT")
set(CMAKE_C_FLAGS_MINSIZEREL "${CMAKE_C_FLAGS_MINSIZEREL} /MT")
set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} /MT")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} /MT")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
set(PLATFORM_LINKFLAGS "/SUBSYSTEM:CONSOLE /STACK:2097152 /INCREMENTAL:NO /NODEFAULTLIB:msvcrt.lib /NODEFAULTLIB:msvcmrt.lib /NODEFAULTLIB:msvcurt.lib /NODEFAULTLIB:msvcrtd.lib")
CMake: Ignore paranoid MSVC linker warnings
2016-02-20 08:45:29 +01:00
# Ignore meaningless for us linker warnings.
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} /ignore:4049 /ignore:4217 /ignore:4221")
set(CMAKE_STATIC_LINKER_FLAGS "${CMAKE_STATIC_LINKER_FLAGS} /ignore:4221")
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
# MSVC only, Mingw doesnt need
if(CMAKE_CL_64)
set(PLATFORM_LINKFLAGS "/MACHINE:X64 /OPT:NOREF ${PLATFORM_LINKFLAGS}")
else()
set(PLATFORM_LINKFLAGS "/MACHINE:IX86 /LARGEADDRESSAWARE ${PLATFORM_LINKFLAGS}")
endif()
MSVC: quiet harmless linker warnings
2014-06-27 11:49:56 +02:00
set(PLATFORM_LINKFLAGS_DEBUG "/IGNORE:4099 /NODEFAULTLIB:libcmt.lib /NODEFAULTLIB:libc.lib")
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
CMAKE / msvc openmp, delay loading of openmp dll so we can set environment variable before it is loaded
2016-03-31 13:45:33 +02:00
# Use dynamic loading for OpenMP
if(WITH_OPENMP)
if(MSVC_VERSION EQUAL 1800)
set(OPENMP_DLL_NAME "vcomp120")
else()
set(OPENMP_DLL_NAME "vcomp140")
endif()
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} /DELAYLOAD:${OPENMP_DLL_NAME}.dll delayimp.lib")
CMAKE disable building the windows launcher, fix type in delayloading of debug dll
2016-03-31 14:05:38 +02:00
set(PLATFORM_LINKFLAGS_DEBUG "${PLATFORM_LINKFLAGS_DEBUG} /DELAYLOAD:${OPENMP_DLL_NAME}d.dll delayimp.lib")
CMAKE / msvc openmp, delay loading of openmp dll so we can set environment variable before it is loaded
2016-03-31 13:45:33 +02:00
endif()
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
if(NOT DEFINED LIBDIR)
Begin to add some MSVC 2015 support
2015-12-10 11:49:53 +01:00
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
# Setup 64bit and 64bit windows systems
if(CMAKE_CL_64)
message(STATUS "64 bit compiler detected.")
Begin to add some MSVC 2015 support
2015-12-10 11:49:53 +01:00
set(LIBDIR_BASE "win64")
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
else()
message(STATUS "32 bit compiler detected.")
Begin to add some MSVC 2015 support
2015-12-10 11:49:53 +01:00
set(LIBDIR_BASE "windows")
endif()
if(MSVC_VERSION EQUAL 1900)
message(STATUS "Visual Studio 2015 detected.")
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/${LIBDIR_BASE}_vc14)
else()
message(STATUS "Visual Studio 2013 detected.")
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/${LIBDIR_BASE}_vc12)
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
endif()
else()
CMake: show error on missing LIBDIR early on Previously CMake would show many messages about missing libs before checking for a missing LIBDIR. Now show the error immediately and exit. Also allow for custom LIBDIR on OSX.
2016-02-26 03:42:56 +01:00
message(STATUS "Using pre-compiled LIBDIR: ${LIBDIR}")
endif()
if(NOT EXISTS "${LIBDIR}/")
message(FATAL_ERROR "Windows requires pre-compiled libs at: '${LIBDIR}'")
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
endif()
# Add each of our libraries to our cmake_prefix_path so find_package() could work
Cleanup: cmake
2014-11-13 15:03:30 +01:00
file(GLOB children RELATIVE ${LIBDIR} ${LIBDIR}/*)
foreach(child ${children})
if(IS_DIRECTORY ${LIBDIR}/${child})
list(APPEND CMAKE_PREFIX_PATH ${LIBDIR}/${child})
endif()
endforeach()
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
set(ZLIB_INCLUDE_DIRS ${LIBDIR}/zlib/include)
set(ZLIB_LIBRARIES ${LIBDIR}/zlib/lib/libz_st.lib)
set(ZLIB_INCLUDE_DIR ${LIBDIR}/zlib/include)
set(ZLIB_LIBRARY ${LIBDIR}/zlib/lib/libz_st.lib)
set(ZLIB_DIR ${LIBDIR}/zlib)
Selective changes picked from: e01449fa4bb0df252d32a3b98ee1e8f195923d96 Author: Jason Wilkins Improves cmake's ability to find our libraries on Windows / MSVC 2013
2014-07-15 16:33:05 +02:00
#find_package(zlib) # we want to find before finding things that depend on it like png
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
find_package(png)
if(NOT PNG_FOUND)
message(WARNING "Using HARDCODED libpng locations")
CMake: indent & missing header
2015-02-18 21:15:55 +01:00
set(PNG_PNG_INCLUDE_DIR ${LIBDIR}/png/include)
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
set(PNG_LIBRARIES libpng)
set(PNG "${LIBDIR}/png")
CMake: correct include dirs
2014-07-01 01:36:11 +02:00
set(PNG_INCLUDE_DIRS "${PNG}/include")
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
set(PNG_LIBPATH ${PNG}/lib) # not cmake defined
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
CMake: make install prefix option irrelevant for MinGW too.
2015-12-27 16:57:31 +01:00
set(JPEG_NAMES ${JPEG_NAMES} libjpeg)
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
find_package(jpeg REQUIRED)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
set(PTHREADS_INCLUDE_DIRS ${LIBDIR}/pthreads/include)
set(PTHREADS_LIBRARIES ${LIBDIR}/pthreads/lib/pthreadVC2.lib)
Fix windows cmake build, this line got accidentally removed in variable renaming.
2011-06-29 19:56:32 +02:00
set(FREETYPE ${LIBDIR}/freetype)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
set(FREETYPE_INCLUDE_DIRS
own error in recent cmake edits
2011-06-28 18:57:25 +02:00
${LIBDIR}/freetype/include
${LIBDIR}/freetype/include/freetype2
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
)
set(FREETYPE_LIBRARY ${LIBDIR}/freetype/lib/freetype2ST.lib)
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
find_package(freetype REQUIRED)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_FFTW3)
set(FFTW3 ${LIBDIR}/fftw3)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 16:12:54 +02:00
set(FFTW3_LIBRARIES libfftw)
set(FFTW3_INCLUDE_DIRS ${FFTW3}/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(FFTW3_LIBPATH ${FFTW3}/lib)
endif()
if(WITH_OPENCOLLADA)
Cmake / Windows Libraries: * Some more fixes for OpenEXR, works now (tested with cv2008 x64 and x32) * Some more changes to have libs in lib/win*/libname/vc2010 folder. Commit to libs itself to change that will follow.
2012-08-04 14:43:45 +02:00
set(OPENCOLLADA ${LIBDIR}/opencollada)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 18:04:35 +02:00
set(OPENCOLLADA_INCLUDE_DIRS
modified build system for updated opencollada libraries (windows only, other platforms might want to update as well)
2013-03-28 19:02:24 +01:00
${OPENCOLLADA}/include/opencollada/COLLADAStreamWriter
${OPENCOLLADA}/include/opencollada/COLLADABaseUtils
${OPENCOLLADA}/include/opencollada/COLLADAFramework
${OPENCOLLADA}/include/opencollada/COLLADASaxFrameworkLoader
${OPENCOLLADA}/include/opencollada/GeneratedSaxParser
cmake: fix for recent break in msvc+collada, also dont cache duplicate python include/library variables.
2011-06-19 15:06:21 +02:00
)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 18:04:35 +02:00
cmake: fix for recent break in msvc+collada, also dont cache duplicate python include/library variables.
2011-06-19 15:06:21 +02:00
set(OPENCOLLADA_LIBRARIES
cmake: remove set_lib_path macro
2013-06-17 20:15:56 +02:00
${OPENCOLLADA}/lib/opencollada/OpenCOLLADASaxFrameworkLoader.lib
${OPENCOLLADA}/lib/opencollada/OpenCOLLADAFramework.lib
${OPENCOLLADA}/lib/opencollada/OpenCOLLADABaseUtils.lib
${OPENCOLLADA}/lib/opencollada/OpenCOLLADAStreamWriter.lib
${OPENCOLLADA}/lib/opencollada/MathMLSolver.lib
${OPENCOLLADA}/lib/opencollada/GeneratedSaxParser.lib
${OPENCOLLADA}/lib/opencollada/xml.lib
${OPENCOLLADA}/lib/opencollada/buffer.lib
${OPENCOLLADA}/lib/opencollada/ftoa.lib
cmake: fix for recent break in msvc+collada, also dont cache duplicate python include/library variables.
2011-06-19 15:06:21 +02:00
)
Fix msvc 2013 / win64 to use new OIIO and llvm and resulting linking requirements
2014-08-01 14:28:00 +02:00
Cmake prefers NOT to !
2014-08-01 15:18:34 +02:00
if(NOT WITH_LLVM)
Fix msvc 2013 / win64 to use new OIIO and llvm and resulting linking requirements
2014-08-01 14:28:00 +02:00
list(APPEND OPENCOLLADA_LIBRARIES ${OPENCOLLADA}/lib/opencollada/UTF.lib)
endif()
fix for error linking opencollada on linux.
2011-09-12 15:58:13 +02:00
set(PCRE_LIBRARIES
cmake: remove set_lib_path macro
2013-06-17 20:15:56 +02:00
${OPENCOLLADA}/lib/opencollada/pcre.lib
fix for building opencollada + msvc
2011-06-19 16:14:29 +02:00
)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
cmake: fix for recent break in msvc+collada, also dont cache duplicate python include/library variables.
2011-06-19 15:06:21 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_CODEC_FFMPEG)
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
set(FFMPEG_INCLUDE_DIRS
${LIBDIR}/ffmpeg/include
${LIBDIR}/ffmpeg/include/msvc
)
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
find_package(FFMPEG)
if(NOT FFMPEG_FOUND)
message(WARNING "Using HARDCODED ffmpeg locations")
Windows: Remove support for MSVC 2012 (VC11). The officially supported compiled is now MSVC 2013, and MSVC 2008 will be faded out slowly over the coming weeks.
2014-05-15 07:49:40 +02:00
set(FFMPEG_LIBRARY_VERSION 55)
set(FFMPEG_LIBRARY_VERSION_AVU 52)
CMake build system update - Extending CMakeLists.txt to support builds with VC2012. - Fix some typo in CMakeLists.txt - Introduces experimental WITH_AVX_CPU to build with /arch:AVX (VC11 only)
2013-05-14 18:16:25 +02:00
set(FFMPEG_LIBRARIES
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
${LIBDIR}/ffmpeg/lib/avcodec-${FFMPEG_LIBRARY_VERSION}.lib
${LIBDIR}/ffmpeg/lib/avformat-${FFMPEG_LIBRARY_VERSION}.lib
${LIBDIR}/ffmpeg/lib/avdevice-${FFMPEG_LIBRARY_VERSION}.lib
${LIBDIR}/ffmpeg/lib/avutil-${FFMPEG_LIBRARY_VERSION_AVU}.lib
CMake build system update - Extending CMakeLists.txt to support builds with VC2012. - Fix some typo in CMakeLists.txt - Introduces experimental WITH_AVX_CPU to build with /arch:AVX (VC11 only)
2013-05-14 18:16:25 +02:00
${LIBDIR}/ffmpeg/lib/swscale-2.lib
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
)
CMake build system update - Extending CMakeLists.txt to support builds with VC2012. - Fix some typo in CMakeLists.txt - Introduces experimental WITH_AVX_CPU to build with /arch:AVX (VC11 only)
2013-05-14 18:16:25 +02:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
if(WITH_IMAGE_OPENEXR)
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
set(OPENEXR_ROOT_DIR ${LIBDIR}/openexr)
set(OPENEXR_VERSION "2.1")
find_package(OPENEXR REQUIRED)
if(NOT OPENEXR_FOUND)
CMake: indent & missing header
2015-02-18 21:15:55 +01:00
message(WARNING "Using HARDCODED OpenEXR locations")
set(OPENEXR ${LIBDIR}/openexr)
set(OPENEXR_INCLUDE_DIR ${OPENEXR}/include)
Windows MSVC allow building with openvdb / tbb
2016-02-10 13:59:04 +01:00
set(OPENEXR_INCLUDE_DIRS ${OPENEXR_INCLUDE_DIR} ${OPENEXR}/include/OpenEXR)
CMake: indent & missing header
2015-02-18 21:15:55 +01:00
set(OPENEXR_LIBPATH ${OPENEXR}/lib)
set(OPENEXR_LIBRARIES
cmake fix full debug builds on msvc
2016-03-31 08:12:41 +02:00
optimized ${OPENEXR_LIBPATH}/Iex-2_2.lib debug ${OPENEXR_LIBPATH}/Iex-2_2_d.lib
optimized ${OPENEXR_LIBPATH}/Half.lib debug ${OPENEXR_LIBPATH}/Half_d.lib
optimized ${OPENEXR_LIBPATH}/IlmImf-2_2.lib debug ${OPENEXR_LIBPATH}/IlmImf-2_2_d.lib
optimized ${OPENEXR_LIBPATH}/Imath-2_2.lib debug ${OPENEXR_LIBPATH}/Imath-2_2_d.lib
optimized ${OPENEXR_LIBPATH}/IlmThread-2_2.lib debug ${OPENEXR_LIBPATH}/IlmThread-2_2_d.lib
CMake: indent & missing header
2015-02-18 21:15:55 +01:00
)
CMake: remove expression in endif(...)
2015-02-18 21:44:40 +01:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
if(WITH_IMAGE_TIFF)
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
# Try to find tiff first then complain and set static and maybe wrong paths
find_package(TIFF)
if(NOT TIFF_FOUND)
message(WARNING "Using HARDCODED libtiff locations")
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
set(TIFF_LIBRARY ${LIBDIR}/tiff/lib/libtiff.lib)
set(TIFF_INCLUDE_DIR ${LIBDIR}/tiff/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_JACK)
revert muddle in changing jack in msvc instead apple
2012-11-11 19:28:45 +01:00
set(JACK_INCLUDE_DIRS
${LIBDIR}/jack/include/jack
${LIBDIR}/jack/include
cleanup for cmake msvc build options, reference some libs directly, fix conflicting flags /Ob1 and /Zi for debug
2011-06-28 04:49:49 +02:00
)
Make CMake use Jack debug libraries when compiling a debug build
2014-02-24 21:25:33 +01:00
set(JACK_LIBRARIES optimized ${LIBDIR}/jack/lib/libjack.lib debug ${LIBDIR}/jack/lib/libjack_d.lib)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
if(WITH_PYTHON)
windows / msvc bump to python 3.5
2015-11-15 11:21:26 +01:00
set(PYTHON_VERSION 3.5) # CACHE STRING)
Switch windows to python 3.3 Should affect on msvc2008 only, however scons with msvc2010 could still be broken.
2012-11-26 13:38:40 +01:00
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
string(REPLACE "." "" _PYTHON_VERSION_NO_DOTS ${PYTHON_VERSION})
CMake: Setting vc10 to use Python 3.3 (it was still set to 3.2). For the time being, I'm having vc10 use the vc9 Python libs, which SCons is currently doing.
2013-01-03 01:29:13 +01:00
# Use shared libs for vc2008 and vc2010 until we actually have vc2010 libs
set(PYTHON_LIBRARY ${LIBDIR}/python/lib/python${_PYTHON_VERSION_NO_DOTS}.lib)
Switch windows to python 3.3 Should affect on msvc2008 only, however scons with msvc2010 could still be broken.
2012-11-26 13:38:40 +01:00
unset(_PYTHON_VERSION_NO_DOTS)
CMake build system update - Extending CMakeLists.txt to support builds with VC2012. - Fix some typo in CMakeLists.txt - Introduces experimental WITH_AVX_CPU to build with /arch:AVX (VC11 only)
2013-05-14 18:16:25 +02:00
# Shared includes for both vc2008 and vc2010
Cmake / Windows: * Fix for Python include path when using msvc 2010.
2012-08-14 18:53:40 +02:00
set(PYTHON_INCLUDE_DIR ${LIBDIR}/python/include/python${PYTHON_VERSION})
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 08:55:45 +02:00
# uncached vars
set(PYTHON_INCLUDE_DIRS "${PYTHON_INCLUDE_DIR}")
set(PYTHON_LIBRARIES "${PYTHON_LIBRARY}")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
recent fixes for mingw + cmake broke msvc
2010-09-16 09:26:06 +02:00
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
if(WITH_BOOST)
Fix cycles windows link errors when building with OSL master branch.
2013-01-30 22:58:47 +01:00
if(WITH_CYCLES_OSL)
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
set(boost_extra_libs wave)
CMake: remove expression in endif(...)
2015-02-18 21:44:40 +01:00
endif()
Replacing gettext i18n backend by boost::locale one. This commit adds a small and simplistic C wrapper around boost's locale library as intern/locale, and heavily simplifies/reduces Blender's own i18n code (under blenfont/ dir). And it adds back UI translation on windows' official builds (with msvc)! Note to platform maintainers: iconv and gettext (libintl) can now be removed from precompiled libs (not gettext binaries, under windows, of course ;) ). Note to MinGW32/64 users: boost_locale lib has not yet been uploaded for those build env, please disable WITH_INTERNATIONAL for now (hopefully will be fixed very soon, have contacted psy-fy).
2012-11-11 17:54:26 +01:00
if(WITH_INTERNATIONAL)
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
list(APPEND boost_extra_libs locale)
CMake: remove expression in endif(...)
2015-02-18 21:44:40 +01:00
endif()
Windows MSVC allow building with openvdb / tbb
2016-02-10 13:59:04 +01:00
if(WITH_OPENVDB)
list(APPEND boost_extra_libs iostreams)
endif()
Selective changes picked from: e01449fa4bb0df252d32a3b98ee1e8f195923d96 Author: Jason Wilkins Improves cmake's ability to find our libraries on Windows / MSVC 2013
2014-07-15 16:33:05 +02:00
set(Boost_USE_STATIC_RUNTIME ON) # prefix lib
set(Boost_USE_MULTITHREADED ON) # suffix -mt
set(Boost_USE_STATIC_LIBS ON) # suffix -s
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
find_package(Boost COMPONENTS date_time filesystem thread regex system ${boost_extra_libs})
Cleanup: cmake
2014-11-13 15:03:30 +01:00
if(NOT Boost_FOUND)
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
message(WARNING "USING HARDCODED boost locations")
set(BOOST ${LIBDIR}/boost)
set(BOOST_INCLUDE_DIR ${BOOST}/include)
patch by Mihai Melinescu: boost hardcoded MSVC12 Updated CMakeLists.txt to account for boost hardcoded locations for VS 2013. Reviewers: juicyfruit Differential Revision: https://developer.blender.org/D261
2014-01-27 09:24:44 +01:00
if(MSVC12)
set(BOOST_LIBPATH ${BOOST}/lib)
Bump boost to 1.60
2016-01-17 12:44:25 +01:00
set(BOOST_POSTFIX "vc120-mt-s-1_60.lib")
set(BOOST_DEBUG_POSTFIX "vc120-mt-sgd-1_60.lib")
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
else()
set(BOOST_LIBPATH ${BOOST}/lib)
Make cycles compile with MSVC 2015
2015-12-29 18:59:23 +01:00
set(BOOST_POSTFIX "vc140-mt-s-1_60.lib")
set(BOOST_DEBUG_POSTFIX "vc140-mt-sgd-1_60.lib")
MSVC 2013 cmake changes Summary: I think we should try to use find_package more over just setting the variables it would set. I added find_package with old behavior as a feedback for boost and openexr @dingto can you test it in msvc2008 setup ? Reviewers: dingto Reviewed By: dingto CC: dingto, brecht Differential Revision: http://developer.blender.org/D104
2013-12-20 14:32:51 +01:00
endif()
set(BOOST_LIBRARIES
optimized libboost_date_time-${BOOST_POSTFIX} optimized libboost_filesystem-${BOOST_POSTFIX}
optimized libboost_regex-${BOOST_POSTFIX}
optimized libboost_system-${BOOST_POSTFIX} optimized libboost_thread-${BOOST_POSTFIX}
debug libboost_date_time-${BOOST_DEBUG_POSTFIX} debug libboost_filesystem-${BOOST_DEBUG_POSTFIX}
debug libboost_regex-${BOOST_DEBUG_POSTFIX}
debug libboost_system-${BOOST_DEBUG_POSTFIX} debug libboost_thread-${BOOST_DEBUG_POSTFIX})
if(WITH_CYCLES_OSL)
set(BOOST_LIBRARIES ${BOOST_LIBRARIES}
optimized libboost_wave-${BOOST_POSTFIX}
debug libboost_wave-${BOOST_DEBUG_POSTFIX})
endif()
if(WITH_INTERNATIONAL)
set(BOOST_LIBRARIES ${BOOST_LIBRARIES}
optimized libboost_locale-${BOOST_POSTFIX}
debug libboost_locale-${BOOST_DEBUG_POSTFIX})
endif()
else() # we found boost using find_package
set(BOOST_INCLUDE_DIR ${Boost_INCLUDE_DIRS})
set(BOOST_LIBRARIES ${Boost_LIBRARIES})
set(BOOST_LIBPATH ${Boost_LIBRARY_DIRS})
Fix cycles windows link errors when building with OSL master branch.
2013-01-30 22:58:47 +01:00
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
set(BOOST_DEFINITIONS "-DBOOST_ALL_NO_LIB")
endif()
if(WITH_OPENIMAGEIO)
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
find_package(OpenImageIO)
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
set(OPENIMAGEIO ${LIBDIR}/openimageio)
set(OPENIMAGEIO_INCLUDE_DIRS ${OPENIMAGEIO}/include)
Fixed linking OIIO on Windows. The debug and optimized options need to be before each individual library in a list.
2014-08-03 18:35:39 +02:00
set(OIIO_OPTIMIZED optimized OpenImageIO optimized OpenImageIO_Util)
set(OIIO_DEBUG debug OpenImageIO_d debug OpenImageIO_Util_d)
set(OPENIMAGEIO_LIBRARIES ${OIIO_OPTIMIZED} ${OIIO_DEBUG})
Cmake / Windows Libraries: * Some more fixes for OpenEXR, works now (tested with cv2008 x64 and x32) * Some more changes to have libs in lib/win*/libname/vc2010 folder. Commit to libs itself to change that will follow.
2012-08-04 14:43:45 +02:00
set(OPENIMAGEIO_LIBPATH ${OPENIMAGEIO}/lib)
Cycles OSL: windows build fixes.
2012-11-14 18:18:47 +01:00
set(OPENIMAGEIO_DEFINITIONS "-DUSE_TBB=0")
Cmake windows, removing more redundant things
2014-11-15 12:42:21 +01:00
set(OPENCOLORIO_DEFINITIONS "-DOCIO_STATIC_BUILD")
CMake: Auto-detect path to idiff application in FindOpenImageIO.cmake Not used at this moment, but will be real soon with new ctests.
2015-01-22 11:52:50 +01:00
set(OPENIMAGEIO_IDIFF "${OPENIMAGEIO}/bin/idiff.exe")
cmake / windows cleanup
2014-11-15 14:36:25 +01:00
add_definitions(-DOIIO_STATIC_BUILD)
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
endif()
CMake: *Remove WITH_MINGW64 option, automatically test for presence of __MINGW64__ definition instead to determine presence of MinGW32/64. *Placeholder for LLVM libraries (Compiled locally but still crashing on render due to thread issue).
2012-12-09 02:42:26 +01:00
if(WITH_LLVM)
CMake: rename LLVM_DIRECTORY -> LLVM_ROOT_DIR Matching convention with all other libs
2015-03-05 05:36:22 +01:00
set(LLVM_ROOT_DIR ${LIBDIR}/llvm CACHE PATH "Path to the LLVM installation")
file(GLOB LLVM_LIBRARY_OPTIMIZED ${LLVM_ROOT_DIR}/lib/*.lib)
Minor changes to CMakeLists.txt to enable debug builds on VS2013. Fix for finding LLVM and OSL debug libs.
2014-02-24 17:53:14 +01:00
CMake: rename LLVM_DIRECTORY -> LLVM_ROOT_DIR Matching convention with all other libs
2015-03-05 05:36:22 +01:00
if(EXISTS ${LLVM_ROOT_DIR}/debug/lib)
Minor changes to CMakeLists.txt to enable debug builds on VS2013. Fix for finding LLVM and OSL debug libs.
2014-02-24 17:53:14 +01:00
foreach(LLVM_OPTIMIZED_LIB ${LLVM_LIBRARY_OPTIMIZED})
get_filename_component(LIBNAME ${LLVM_OPTIMIZED_LIB} ABSOLUTE)
list(APPEND LLVM_LIBS optimized ${LIBNAME})
endforeach(LLVM_OPTIMIZED_LIB)
CMake: rename LLVM_DIRECTORY -> LLVM_ROOT_DIR Matching convention with all other libs
2015-03-05 05:36:22 +01:00
file(GLOB LLVM_LIBRARY_DEBUG ${LLVM_ROOT_DIR}/debug/lib/*.lib)
Minor changes to CMakeLists.txt to enable debug builds on VS2013. Fix for finding LLVM and OSL debug libs.
2014-02-24 17:53:14 +01:00
foreach(LLVM_DEBUG_LIB ${LLVM_LIBRARY_DEBUG})
get_filename_component(LIBNAME ${LLVM_DEBUG_LIB} ABSOLUTE)
list(APPEND LLVM_LIBS debug ${LIBNAME})
endforeach(LLVM_DEBUG_LIB)
set(LLVM_LIBRARY ${LLVM_LIBS})
else()
message(WARNING "LLVM debug libs not present on this system. Using release libs for debug builds.")
set(LLVM_LIBRARY ${LLVM_LIBRARY_OPTIMIZED})
endif()
CMake: *Remove WITH_MINGW64 option, automatically test for presence of __MINGW64__ definition instead to determine presence of MinGW32/64. *Placeholder for LLVM libraries (Compiled locally but still crashing on render due to thread issue).
2012-12-09 02:42:26 +01:00
endif()
Color Management, Stage 1: Initial OpenColorIO library integration This commit integrates support of OpenColorIO library into build systems. It also contains C-API for OpenColorIO library which could be used by Blender. CMake has got find rules familiar to OpenImageIO's one which makes it easier for build system to find needed libraries and includes. Scons only could use explicitly defined paths to libraries and includes. C-API would be compiled and Blender would be linked against C-API and OpenColorIO but it wouldn't affect on Blender behavior at all. OpenColorIO could be disabled by setting up WITH_OCIO to Off in CMake and setting WITH_BF_OCIO in Scons.
2012-09-15 12:03:17 +02:00
if(WITH_OPENCOLORIO)
set(OPENCOLORIO ${LIBDIR}/opencolorio)
set(OPENCOLORIO_INCLUDE_DIRS ${OPENCOLORIO}/include)
set(OPENCOLORIO_LIBRARIES OpenColorIO)
Boost directories were not properly configured to vc2010. Opencolorio directories and openimageio not work as you would expect macro
2012-09-25 17:11:34 +02:00
set(OPENCOLORIO_LIBPATH ${LIBDIR}/opencolorio/lib)
Color Management, Stage 1: Initial OpenColorIO library integration This commit integrates support of OpenColorIO library into build systems. It also contains C-API for OpenColorIO library which could be used by Blender. CMake has got find rules familiar to OpenImageIO's one which makes it easier for build system to find needed libraries and includes. Scons only could use explicitly defined paths to libraries and includes. C-API would be compiled and Blender would be linked against C-API and OpenColorIO but it wouldn't affect on Blender behavior at all. OpenColorIO could be disabled by setting up WITH_OCIO to Off in CMake and setting WITH_BF_OCIO in Scons.
2012-09-15 12:03:17 +02:00
set(OPENCOLORIO_DEFINITIONS)
endif()
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
if(WITH_OPENVDB)
cmake fix full debug builds on msvc
2016-03-31 08:12:41 +02:00
set(BLOSC_LIBRARIES optimized ${LIBDIR}/blosc/lib/libblosc.lib debug ${LIBDIR}/blosc/lib/libblosc_d.lib)
set(TBB_LIBRARIES optimized ${LIBDIR}/tbb/lib/tbb.lib debug ${LIBDIR}/tbb/lib/tbb_debug.lib)
Windows MSVC allow building with openvdb / tbb
2016-02-10 13:59:04 +01:00
set(TBB_INCLUDE_DIR ${LIBDIR}/tbb/include)
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
set(OPENVDB ${LIBDIR}/openvdb)
Windows MSVC allow building with openvdb / tbb
2016-02-10 13:59:04 +01:00
set(OPENVDB_INCLUDE_DIRS ${OPENVDB}/include ${TBB_INCLUDE_DIR})
cmake fix full debug builds on msvc
2016-03-31 08:12:41 +02:00
set(OPENVDB_LIBRARIES optimized openvdb debug openvdb_d ${TBB_LIBRARIES} ${BLOSC_LIBRARIES})
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
set(OPENVDB_LIBPATH ${LIBDIR}/openvdb/lib)
endif()
Color Management, Stage 1: Initial OpenColorIO library integration This commit integrates support of OpenColorIO library into build systems. It also contains C-API for OpenColorIO library which could be used by Blender. CMake has got find rules familiar to OpenImageIO's one which makes it easier for build system to find needed libraries and includes. Scons only could use explicitly defined paths to libraries and includes. C-API would be compiled and Blender would be linked against C-API and OpenColorIO but it wouldn't affect on Blender behavior at all. OpenColorIO could be disabled by setting up WITH_OCIO to Off in CMake and setting WITH_BF_OCIO in Scons.
2012-09-15 12:03:17 +02:00
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
if(WITH_MOD_CLOTH_ELTOPO)
set(LAPACK ${LIBDIR}/lapack)
# set(LAPACK_INCLUDE_DIR ${LAPACK}/include)
set(LAPACK_LIBPATH ${LAPACK}/lib)
set(LAPACK_LIBRARIES
${LIBDIR}/lapack/lib/libf2c.lib
${LIBDIR}/lapack/lib/clapack_nowrap.lib
${LIBDIR}/lapack/lib/BLAS_nowrap.lib
)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
define NDEBUG for release builds so assert() is disabled.
2010-10-18 14:35:40 +02:00
OpenSubdiv: Commit of OpenSubdiv integration into Blender This commit contains all the remained parts needed for initial integration of OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU backends which works in the following way: - When SubSurf modifier is the last in the modifiers stack then GPU pipeline of OpenSubdiv is used, making viewport performance as fast as possible. This also requires graphscard with GLSL 1.5 support. If this requirement is not met, then no GPU pipeline is used at all. - If SubSurf is not a last modifier or if DerivesMesh is being evaluated for rendering then CPU limit evaluation API from OpenSubdiv is used. This only replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG structures exactly the same as they used to be for ages now. This integration is fully covered with ifdef and not enabled by default because there are several TODOs to be solved first: - Face varying data interpolation is not really cleanly implemented for GPU in OpenSubdiv 3.0. It is also not implemented for limit evaluation API. This basically means we'll have really hard time supporting UVs. - Limit evaluation only works with adaptivly subdivided meshes so far, which basically means all the points of CCG are pushed to the limit. This gives different result from old code. - There are some serious optimizations possible on the topology refiner creation, which would speed up initial OpenSubdiv mesh creation. - There are some hardcoded asumptions in the GPU and DerivedMesh areas which could be generalized. That's something where Antony and Campbell can help, making it so the code is structured in a way which is reusable by all planned viewport projects. - There are also some workarounds in the dependency graph to make sure OpenGL buffers are only freed from the main thread. Those who'll be wanting to make experiments with this code should grab dev branch (NOT master) from https://github.com/Nazg-Gul/OpenSubdiv/tree/dev There are some patches applied in there which we're working on on getting into upstream.
2015-07-20 16:08:06 +02:00
if(WITH_OPENSUBDIV)
set(OPENSUBDIV_INCLUDE_DIR ${LIBDIR}/opensubdiv/include)
set(OPENSUBDIV_LIBPATH ${LIBDIR}/opensubdiv/lib)
set(OPENSUBDIV_LIBRARIES ${OPENSUBDIV_LIBPATH}/osdCPU.lib ${OPENSUBDIV_LIBPATH}/osdGPU.lib)
find_package(OpenSubdiv)
endif()
MinGW still uses SDL1 - will need to change this of course but no need to keep compilation broken for now
2015-02-03 12:51:12 +01:00
if(WITH_SDL)
set(SDL ${LIBDIR}/sdl)
set(SDL_INCLUDE_DIR ${SDL}/include)
set(SDL_LIBPATH ${SDL}/lib)
CMake: Fix errors building by MinGW Some libraries are nto updated for MinGW hence build system needs some exceptions for this compiler.
2015-12-26 16:01:17 +01:00
# MinGW TODO: Update MinGW to SDL2
if(NOT CMAKE_COMPILER_IS_GNUCC)
set(SDL_LIBRARY SDL2)
else()
set(SDL_LIBRARY SDL)
endif()
MinGW still uses SDL1 - will need to change this of course but no need to keep compilation broken for now
2015-02-03 12:51:12 +01:00
endif()
Audaspace: fixing problems for the merge to master suggested by Campbell and Sergey. - rename WITH_EXTERNAL_AUDASPACE to WITH_SYSTEM_AUDASPACE. - rename C/PYAUDASPACE to AUDASPACE_C/PY - simplifying cmake defines and includes. - fixing include paths and enabling WITH_SYSTEM_AUDASPACE for windows. - fixing scons building. - other minor build system fixes.
2015-06-16 10:03:35 +02:00
# Audio IO
if(WITH_SYSTEM_AUDASPACE)
set(AUDASPACE_INCLUDE_DIRS ${LIBDIR}/audaspace/include/audaspace)
set(AUDASPACE_LIBRARIES ${LIBDIR}/audaspace/lib/audaspace.lib)
set(AUDASPACE_C_INCLUDE_DIRS ${LIBDIR}/audaspace/include/audaspace)
set(AUDASPACE_C_LIBRARIES ${LIBDIR}/audaspace/lib/audaspace-c.lib)
set(AUDASPACE_PY_INCLUDE_DIRS ${LIBDIR}/audaspace/include/audaspace)
set(AUDASPACE_PY_LIBRARIES ${LIBDIR}/audaspace/lib/audaspace-py.lib)
endif()
rename WholeCharacter in C too, add pthreads include back for msvc which needs it.
2012-04-26 20:18:09 +02:00
# used in many places so include globally, like OpenGL
code cleanup: use system includes for cmake, otherwise warnings get printed in headers.
2012-09-18 06:40:20 +02:00
blender_include_dirs_sys("${PTHREADS_INCLUDE_DIRS}")
rename WholeCharacter in C too, add pthreads include back for msvc which needs it.
2012-04-26 20:18:09 +02:00
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 03:11:42 +02:00
elseif(CMAKE_COMPILER_IS_GNUCC)
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
# keep GCC specific stuff here
include(CheckCSourceCompiles)
# Setup 64bit and 64bit windows systems
CHECK_C_SOURCE_COMPILES("
#ifndef __MINGW64__
#error
#endif
int main(void) { return 0; }
"
WITH_MINGW64)
CMake: show error on missing LIBDIR early on Previously CMake would show many messages about missing libs before checking for a missing LIBDIR. Now show the error immediately and exit. Also allow for custom LIBDIR on OSX.
2016-02-26 03:42:56 +01:00
if(NOT DEFINED LIBDIR)
if(WITH_MINGW64)
message(STATUS "Compiling for 64 bit with MinGW-w64.")
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/mingw64)
else()
message(STATUS "Compiling for 32 bit with MinGW-w32.")
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/mingw32)
if(WITH_RAYOPTIMIZATION)
message(WARNING "MinGW-w32 is known to be unstable with 'WITH_RAYOPTIMIZATION' option enabled.")
endif()
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
endif()
CMake: show error on missing LIBDIR early on Previously CMake would show many messages about missing libs before checking for a missing LIBDIR. Now show the error immediately and exit. Also allow for custom LIBDIR on OSX.
2016-02-26 03:42:56 +01:00
else()
message(STATUS "Using pre-compiled LIBDIR: ${LIBDIR}")
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
endif()
CMake: show error on missing LIBDIR early on Previously CMake would show many messages about missing libs before checking for a missing LIBDIR. Now show the error immediately and exit. Also allow for custom LIBDIR on OSX.
2016-02-26 03:42:56 +01:00
if(NOT EXISTS "${LIBDIR}/")
message(FATAL_ERROR "Windows requires pre-compiled libs at: '${LIBDIR}'")
endif()
Windows: Add stacktrace support when unhandled exception occurs. We need to register the exception handler slightly differently here, as well as adding DbgHelp as a library, but according to docs it should be supported in recent Windows editions (Win XP included even). We can try it first and revert if there are issues.
2015-03-03 13:39:15 +01:00
list(APPEND PLATFORM_LINKLIBS -lshell32 -lshfolder -lgdi32 -lmsvcrt -lwinmm -lmingw32 -lm -lws2_32 -lz -lstdc++ -lole32 -luuid -lwsock32 -lpsapi -ldbghelp)
Input Method Editor (IME) support for text buttons Original patch by @random (D765) with some minor work done by @campbell and me. At this place, I'd like call out a number of people who were involved and deserve a big "Thank you!": * At the first place @randon who developed and submitted the patch * The Blendercn community which helped a lot with testing - espacially * @yuzukyo, @leon_cheung and @kjym3 * @campbellbarton, @mont29 and @sergey for their help and advises during * review * @ton who realized the importance of this early on and asked me for * reviewing We are still not finished, as this is only the first part of the implementaion, but there's more to come!
2014-12-07 00:58:17 +01:00
if(WITH_INPUT_IME)
list(APPEND PLATFORM_LINKLIBS -limm32)
endif()
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 03:11:42 +02:00
set(PLATFORM_CFLAGS "-pipe -funsigned-char -fno-strict-aliasing")
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 22:09:59 +02:00
if(WITH_MINGW64)
revert 45924, not a very clean solution, especially for external libraries and looks like -fpermissive is used in linux too
2012-04-24 18:14:23 +02:00
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fpermissive")
CMake: use a list for PLATFORM_LINKLIBS
2014-07-25 06:35:53 +02:00
list(APPEND PLATFORM_LINKLIBS -lpthread)
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 22:09:59 +02:00
add_definitions(-DFREE_WINDOWS64 -DMS_WIN64)
endif()
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 03:11:42 +02:00
add_definitions(-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE)
own recent commit broke this python import: from mathutils.geometry import PolyFill I couldn't find a way for python's inittab to do this so just inserting mathutils.geometry into sys.modules manually.
2010-10-31 14:17:39 +01:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
add_definitions(-DFREE_WINDOWS)
cmake/mingw was missing defines.
2010-10-04 01:27:33 +02:00
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 03:11:42 +02:00
set(PNG "${LIBDIR}/png")
CMake: correct include dirs
2014-07-01 01:36:11 +02:00
set(PNG_INCLUDE_DIRS "${PNG}/include")
Fix for cmake for recent mingw png lib move.
2011-12-19 00:32:24 +01:00
set(PNG_LIBPATH ${PNG}/lib) # not cmake defined
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 23:25:23 +02:00
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 22:09:59 +02:00
if(WITH_MINGW64)
set(JPEG_LIBRARIES jpeg)
else()
set(JPEG_LIBRARIES libjpeg)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(PNG_LIBRARIES png)
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 23:25:23 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(ZLIB ${LIBDIR}/zlib)
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 15:43:13 +01:00
set(ZLIB_INCLUDE_DIRS ${ZLIB}/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(ZLIB_LIBPATH ${ZLIB}/lib)
set(ZLIB_LIBRARIES z)
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 23:25:23 +02:00
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
set(JPEG "${LIBDIR}/jpeg")
set(JPEG_INCLUDE_DIR "${JPEG}/include")
set(JPEG_LIBPATH ${JPEG}/lib) # not cmake defined
CMake build system update - Extending CMakeLists.txt to support builds with VC2012. - Fix some typo in CMakeLists.txt - Introduces experimental WITH_AVX_CPU to build with /arch:AVX (VC11 only)
2013-05-14 18:16:25 +02:00
# comes with own pthread library
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 22:09:59 +02:00
if(NOT WITH_MINGW64)
set(PTHREADS ${LIBDIR}/pthreads)
Remove non existent pthread include directory for MinGW, also slight message correction for 64 bit MinGW
2012-11-26 20:50:08 +01:00
#set(PTHREADS_INCLUDE_DIRS ${PTHREADS}/include)
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 22:09:59 +02:00
set(PTHREADS_LIBPATH ${PTHREADS}/lib)
set(PTHREADS_LIBRARIES pthreadGC2)
endif()
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 03:11:42 +02:00
set(FREETYPE ${LIBDIR}/freetype)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(FREETYPE_INCLUDE_DIRS ${FREETYPE}/include ${FREETYPE}/include/freetype2)
set(FREETYPE_LIBPATH ${FREETYPE}/lib)
set(FREETYPE_LIBRARY freetype)
if(WITH_FFTW3)
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 03:11:42 +02:00
set(FFTW3 ${LIBDIR}/fftw3)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 16:12:54 +02:00
set(FFTW3_LIBRARIES fftw3)
set(FFTW3_INCLUDE_DIRS ${FFTW3}/include)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(FFTW3_LIBPATH ${FFTW3}/lib)
endif()
if(WITH_OPENCOLLADA)
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 03:11:42 +02:00
set(OPENCOLLADA ${LIBDIR}/opencollada)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 18:04:35 +02:00
set(OPENCOLLADA_INCLUDE_DIRS
Fix build for MinGW without opencollada (updated libs coming soon), MinGW64 now builds with opencollada
2013-04-02 04:05:03 +02:00
${OPENCOLLADA}/include/opencollada/COLLADAStreamWriter
${OPENCOLLADA}/include/opencollada/COLLADABaseUtils
${OPENCOLLADA}/include/opencollada/COLLADAFramework
${OPENCOLLADA}/include/opencollada/COLLADASaxFrameworkLoader
${OPENCOLLADA}/include/opencollada/GeneratedSaxParser
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 18:04:35 +02:00
)
modified build system for updated opencollada libraries (windows only, other platforms might want to update as well)
2013-03-28 19:02:24 +01:00
set(OPENCOLLADA_LIBPATH ${OPENCOLLADA}/lib/opencollada)
Fix compilation on MinGW(64/32) Also, add appropriate lib paths for recent OpenCollada for mingw32 (coming soon to an svn server near you)
2013-04-02 15:07:01 +02:00
set(OPENCOLLADA_LIBRARIES OpenCOLLADAStreamWriter OpenCOLLADASaxFrameworkLoader OpenCOLLADAFramework OpenCOLLADABaseUtils GeneratedSaxParser UTF MathMLSolver buffer ftoa xml)
fix for error linking opencollada on linux.
2011-09-12 15:58:13 +02:00
set(PCRE_LIBRARIES pcre)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
formatting edits only
2011-09-30 17:51:58 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_CODEC_FFMPEG)
set(FFMPEG ${LIBDIR}/ffmpeg)
Patch #31563: Additional include directory for FFMPEG Fedora 16 is still using /usr/include/ffmpeg, not /usr/include to store FFmpeg's headers. Added it to search paths. Also remove FFmpeg include directory listed in FFMPEG_INCLUDE_DIRS twice Patch by Arno Mayrhofer (aka azrael3000), thanks!
2012-05-27 15:44:21 +02:00
set(FFMPEG_INCLUDE_DIRS ${FFMPEG}/include)
Enable ffmpeg building with MinGW-w64. The libraries were compiled with gcc 4.7, however is has been claimed there are issues with gcc > 4.4 so this is for testing purposes. Still it doesn't crash on startup anymore. Forgot to mention on ffmpeg lib commit that committed ffmpeg version is 0.10.2
2012-05-10 13:37:41 +02:00
if(WITH_MINGW64)
set(FFMPEG_LIBRARIES avcodec.dll avformat.dll avdevice.dll avutil.dll swscale.dll swresample.dll)
else()
Fix mingw32 compilation
2014-03-29 23:51:30 +01:00
set(FFMPEG_LIBRARIES avcodec-55 avformat-55 avdevice-55 avutil-52 swscale-2)
Enable ffmpeg building with MinGW-w64. The libraries were compiled with gcc 4.7, however is has been claimed there are issues with gcc > 4.4 so this is for testing purposes. Still it doesn't crash on startup anymore. Forgot to mention on ffmpeg lib commit that committed ffmpeg version is 0.10.2
2012-05-10 13:37:41 +02:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(FFMPEG_LIBPATH ${FFMPEG}/lib)
endif()
if(WITH_IMAGE_OPENEXR)
Revert part of r49504 by Genscher: * MSVC Paths were put into the MinGW block, so Mingw did not work anymore. * Also fix paths for vc2010 libs now, so they should work now with cmake.
2012-08-04 13:39:16 +02:00
set(OPENEXR ${LIBDIR}/openexr)
CMake: *Remove WITH_MINGW64 option, automatically test for presence of __MINGW64__ definition instead to determine presence of MinGW32/64. *Placeholder for LLVM libraries (Compiled locally but still crashing on render due to thread issue).
2012-12-09 02:42:26 +01:00
set(OPENEXR_INCLUDE_DIR ${OPENEXR}/include)
Revert part of r49504 by Genscher: * MSVC Paths were put into the MinGW block, so Mingw did not work anymore. * Also fix paths for vc2010 libs now, so they should work now with cmake.
2012-08-04 13:39:16 +02:00
set(OPENEXR_INCLUDE_DIRS ${OPENEXR}/include/OpenEXR)
set(OPENEXR_LIBRARIES Half IlmImf Imath IlmThread Iex)
set(OPENEXR_LIBPATH ${OPENEXR}/lib)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
if(WITH_IMAGE_TIFF)
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 03:11:42 +02:00
set(TIFF ${LIBDIR}/tiff)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(TIFF_LIBRARY tiff)
set(TIFF_INCLUDE_DIR ${TIFF}/include)
set(TIFF_LIBPATH ${TIFF}/lib)
endif()
if(WITH_JACK)
set(JACK ${LIBDIR}/jack)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 16:12:54 +02:00
set(JACK_INCLUDE_DIRS ${JACK}/include/jack ${JACK}/include)
set(JACK_LIBRARIES jack)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(JACK_LIBPATH ${JACK}/lib)
formatting edits only
2011-09-30 17:51:58 +02:00
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 23:25:23 +02:00
# TODO, gives linking errors, force off
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(WITH_JACK OFF)
endif()
[#21842] Beta patch to restore cmake MinGW compilation from Riakiotakis Antonis (psy-fi) with modifications. notes: - needed to remove quotes around filepaths for copying. - WITH_JACK, doesnt link - WITH_FFMPEG, doesnt build - WITH_RAYOPTIMIZATION, gave an error for me. (no mmx support)
2010-05-28 23:25:23 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_PYTHON)
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 08:55:45 +02:00
# normally cached but not since we include them with blender
CMake/SCons: set Python to 3.5
2015-11-27 07:24:11 +01:00
set(PYTHON_VERSION 3.5) # CACHE STRING)
Python: move to version 3.4x on all platforms
2014-04-30 15:13:25 +02:00
string(REPLACE "." "" _PYTHON_VERSION_NO_DOTS ${PYTHON_VERSION})
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 08:55:45 +02:00
set(PYTHON_INCLUDE_DIR "${LIBDIR}/python/include/python${PYTHON_VERSION}") # CACHE PATH)
Python: move to version 3.4x on all platforms
2014-04-30 15:13:25 +02:00
set(PYTHON_LIBRARY "${LIBDIR}/python/lib/python${_PYTHON_VERSION_NO_DOTS}mw.lib") # CACHE FILEPATH)
unset(_PYTHON_VERSION_NO_DOTS)
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 08:55:45 +02:00
# uncached vars
set(PYTHON_INCLUDE_DIRS "${PYTHON_INCLUDE_DIR}")
set(PYTHON_LIBRARIES "${PYTHON_LIBRARY}")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
recent fixes for mingw + cmake broke msvc
2010-09-16 09:26:06 +02:00
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
if(WITH_BOOST)
Update MinGW to use correct lib location for boost
2011-11-08 18:19:14 +01:00
set(BOOST ${LIBDIR}/boost)
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
set(BOOST_INCLUDE_DIR ${BOOST}/include)
First MinGW-w64 support for cmake has been added. To test I recommend this build: http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them. This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64. Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup). Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW. The wiki docs have also updated. Happy testing!
2012-04-23 22:09:59 +02:00
if(WITH_MINGW64)
set(BOOST_POSTFIX "mgw47-mt-s-1_49")
set(BOOST_DEBUG_POSTFIX "mgw47-mt-sd-1_49")
else()
* Enable opencolorio for scons/mingw32 (coming very soon) * Change names of libraries for mingw32 boost to 1.49
2012-09-16 22:26:28 +02:00
set(BOOST_POSTFIX "mgw46-mt-s-1_49")
set(BOOST_DEBUG_POSTFIX "mgw46-mt-sd-1_49")
style cleanup: trailing tabs & expand some non prefix tabs into spaces.
2012-10-21 07:46:41 +02:00
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
set(BOOST_LIBRARIES
*Correct syntax for static, since we invoke g++ as linker and we have to pass it to ld. *CMakefile: Update boost and OpenImageIO libraries for MinGW like in the cycles branch
2011-11-08 17:03:28 +01:00
optimized boost_date_time-${BOOST_POSTFIX} boost_filesystem-${BOOST_POSTFIX}
fix cmake in case the boostlibs don't contain boost_python3 yet
2012-09-24 21:53:33 +02:00
boost_regex-${BOOST_POSTFIX}
OSL/cmake: the non-intrusive parts, so other os-maintainers can take code over
2012-09-24 21:06:28 +02:00
boost_system-${BOOST_POSTFIX} boost_thread-${BOOST_POSTFIX}
*Correct syntax for static, since we invoke g++ as linker and we have to pass it to ld. *CMakefile: Update boost and OpenImageIO libraries for MinGW like in the cycles branch
2011-11-08 17:03:28 +01:00
debug boost_date_time-${BOOST_DEBUG_POSTFIX} boost_filesystem-${BOOST_DEBUG_POSTFIX}
fix cmake in case the boostlibs don't contain boost_python3 yet
2012-09-24 21:53:33 +02:00
boost_regex-${BOOST_DEBUG_POSTFIX}
fix cmake in case the boostlibs don't contain boost_python3 refactor ( was possibly not correct)
2012-09-24 22:37:18 +02:00
boost_system-${BOOST_DEBUG_POSTFIX} boost_thread-${BOOST_DEBUG_POSTFIX})
Replacing gettext i18n backend by boost::locale one. This commit adds a small and simplistic C wrapper around boost's locale library as intern/locale, and heavily simplifies/reduces Blender's own i18n code (under blenfont/ dir). And it adds back UI translation on windows' official builds (with msvc)! Note to platform maintainers: iconv and gettext (libintl) can now be removed from precompiled libs (not gettext binaries, under windows, of course ;) ). Note to MinGW32/64 users: boost_locale lib has not yet been uploaded for those build env, please disable WITH_INTERNATIONAL for now (hopefully will be fixed very soon, have contacted psy-fy).
2012-11-11 17:54:26 +01:00
if(WITH_INTERNATIONAL)
set(BOOST_LIBRARIES ${BOOST_LIBRARIES}
Fix CMake boost locale lib names for MinGW64.
2012-11-11 23:50:28 +01:00
optimized boost_locale-${BOOST_POSTFIX}
debug boost_locale-${BOOST_DEBUG_POSTFIX})
endif()
Add wave to boost libraries for MinGW if OSL is turned on (still not supported but making sure it works correctly when it is)
2013-01-13 13:32:37 +01:00
if(WITH_CYCLES_OSL)
set(BOOST_LIBRARIES ${BOOST_LIBRARIES}
optimized boost_wave-${BOOST_POSTFIX}
debug boost_wave-${BOOST_DEBUG_POSTFIX})
endif()
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 03:11:42 +02:00
set(BOOST_LIBPATH ${BOOST}/lib)
*Correct syntax for static, since we invoke g++ as linker and we have to pass it to ld. *CMakefile: Update boost and OpenImageIO libraries for MinGW like in the cycles branch
2011-11-08 17:03:28 +01:00
set(BOOST_DEFINITIONS "-DBOOST_ALL_NO_LIB -DBOOST_THREAD_USE_LIB ")
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
endif()
if(WITH_OPENIMAGEIO)
Update build files to use the new lib locations for MinGW. For builders: you will need to checkout https://svn.blender.org/svnroot/bf-blender/trunk/lib/mingw32/ to build with MinGW past this commit.
2012-04-23 03:11:42 +02:00
set(OPENIMAGEIO ${LIBDIR}/openimageio)
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
set(OPENIMAGEIO_INCLUDE_DIRS ${OPENIMAGEIO}/include)
set(OPENIMAGEIO_LIBRARIES OpenImageIO)
set(OPENIMAGEIO_LIBPATH ${OPENIMAGEIO}/lib)
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
set(OPENIMAGEIO_DEFINITIONS "")
CMake: Auto-detect path to idiff application in FindOpenImageIO.cmake Not used at this moment, but will be real soon with new ctests.
2015-01-22 11:52:50 +01:00
set(OPENIMAGEIO_IDIFF "${OPENIMAGEIO}/bin/idiff.exe")
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
endif()
link mingw libstdc++ and libgcc libs statically so users dont need mingw installed to use mingw builds
2012-01-05 08:52:03 +01:00
CMake: *Remove WITH_MINGW64 option, automatically test for presence of __MINGW64__ definition instead to determine presence of MinGW32/64. *Placeholder for LLVM libraries (Compiled locally but still crashing on render due to thread issue).
2012-12-09 02:42:26 +01:00
if(WITH_LLVM)
CMake: rename LLVM_DIRECTORY -> LLVM_ROOT_DIR Matching convention with all other libs
2015-03-05 05:36:22 +01:00
set(LLVM_ROOT_DIR ${LIBDIR}/llvm CACHE PATH "Path to the LLVM installation")
set(LLVM_LIBPATH ${LLVM_ROOT_DIR}/lib)
CMake build system update - Extending CMakeLists.txt to support builds with VC2012. - Fix some typo in CMakeLists.txt - Introduces experimental WITH_AVX_CPU to build with /arch:AVX (VC11 only)
2013-05-14 18:16:25 +02:00
# Explicitly set llvm lib order.
CMake: *Remove WITH_MINGW64 option, automatically test for presence of __MINGW64__ definition instead to determine presence of MinGW32/64. *Placeholder for LLVM libraries (Compiled locally but still crashing on render due to thread issue).
2012-12-09 02:42:26 +01:00
#---- WARNING ON GCC ORDER OF LIBS IS IMPORTANT, DO NOT CHANGE! ---------
set(LLVM_LIBRARY LLVMSelectionDAG LLVMCodeGen LLVMScalarOpts LLVMAnalysis LLVMArchive
LLVMAsmParser LLVMAsmPrinter
LLVMBitReader LLVMBitWriter
LLVMDebugInfo LLVMExecutionEngine
LLVMInstCombine LLVMInstrumentation
LLVMInterpreter LLVMJIT
LLVMLinker LLVMMC
LLVMMCDisassembler LLVMMCJIT
LLVMMCParser LLVMObject
LLVMRuntimeDyld
LLVMSupport
LLVMTableGen LLVMTarget
LLVMTransformUtils LLVMVectorize
LLVMX86AsmParser LLVMX86AsmPrinter
LLVMX86CodeGen LLVMX86Desc
LLVMX86Disassembler LLVMX86Info
LLVMX86Utils LLVMipa
LLVMipo LLVMCore)
CMake build system update - Extending CMakeLists.txt to support builds with VC2012. - Fix some typo in CMakeLists.txt - Introduces experimental WITH_AVX_CPU to build with /arch:AVX (VC11 only)
2013-05-14 18:16:25 +02:00
# imagehelp is needed by LLVM 3.1 on MinGW, check lib\Support\Windows\Signals.inc
CMake: use a list for PLATFORM_LINKLIBS
2014-07-25 06:35:53 +02:00
list(APPEND PLATFORM_LINKLIBS -limagehlp)
CMake: *Remove WITH_MINGW64 option, automatically test for presence of __MINGW64__ definition instead to determine presence of MinGW32/64. *Placeholder for LLVM libraries (Compiled locally but still crashing on render due to thread issue).
2012-12-09 02:42:26 +01:00
endif()
Color Management, Stage 1: Initial OpenColorIO library integration This commit integrates support of OpenColorIO library into build systems. It also contains C-API for OpenColorIO library which could be used by Blender. CMake has got find rules familiar to OpenImageIO's one which makes it easier for build system to find needed libraries and includes. Scons only could use explicitly defined paths to libraries and includes. C-API would be compiled and Blender would be linked against C-API and OpenColorIO but it wouldn't affect on Blender behavior at all. OpenColorIO could be disabled by setting up WITH_OCIO to Off in CMake and setting WITH_BF_OCIO in Scons.
2012-09-15 12:03:17 +02:00
if(WITH_OPENCOLORIO)
set(OPENCOLORIO ${LIBDIR}/opencolorio)
set(OPENCOLORIO_INCLUDE_DIRS ${OPENCOLORIO}/include)
set(OPENCOLORIO_LIBRARIES OpenColorIO)
set(OPENCOLORIO_LIBPATH ${OPENCOLORIO}/lib)
set(OPENCOLORIO_DEFINITIONS)
endif()
MinGW still uses SDL1 - will need to change this of course but no need to keep compilation broken for now
2015-02-03 12:51:12 +01:00
if(WITH_SDL)
set(SDL ${LIBDIR}/sdl)
set(SDL_INCLUDE_DIR ${SDL}/include)
set(SDL_LIBRARY SDL)
set(SDL_LIBPATH ${SDL}/lib)
endif()
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
if(WITH_OPENVDB)
set(OPENVDB ${LIBDIR}/openvdb)
set(OPENVDB_INCLUDE_DIRS ${OPENVDB}/include)
set(OPENVDB_LIBRARIES openvdb ${TBB_LIBRARIES})
set(OPENVDB_LIBPATH ${LIBDIR}/openvdb/lib)
set(OPENVDB_DEFINITIONS)
endif()
*Correct syntax for static, since we invoke g++ as linker and we have to pass it to ld. *CMakefile: Update boost and OpenImageIO libraries for MinGW like in the cycles branch
2011-11-08 17:03:28 +01:00
set(PLATFORM_LINKFLAGS "-Xlinker --stack=2097152")
set 2mb stack for mingw too.
2011-03-12 01:50:34 +01:00
disable recent attempt to static link mingw DLL's causes errors for some users. also remove break statement, mistake on last commit.
2012-01-05 11:05:24 +01:00
## DISABLE - causes linking errors
code cleanup: correct spelling
2012-09-28 08:45:20 +02:00
## for re-distribution, so users dont need mingw installed
disable recent attempt to static link mingw DLL's causes errors for some users. also remove break statement, mistake on last commit.
2012-01-05 11:05:24 +01:00
# set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -static-libgcc -static-libstdc++")
link mingw libstdc++ and libgcc libs statically so users dont need mingw installed to use mingw builds
2012-01-05 08:52:03 +01:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
# Things common to both mingw and MSVC should go here
set(WINTAB_INC ${LIBDIR}/wintab/include)
if(WITH_OPENAL)
set(OPENAL ${LIBDIR}/openal)
set(OPENALDIR ${LIBDIR}/openal)
Code Cleanup: whitespace
2014-01-23 12:34:56 +01:00
set(OPENAL_INCLUDE_DIR ${OPENAL}/include)
CMake/SCons: finish removing MSVC2012 references
2014-05-15 08:12:15 +02:00
if(MSVC12)
Code Cleanup: whitespace
2014-01-23 12:34:56 +01:00
set(OPENAL_LIBRARY openal32)
else()
set(OPENAL_LIBRARY wrap_oal)
endif()
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
set(OPENAL_LIBPATH ${OPENAL}/lib)
endif()
if(WITH_CODEC_SNDFILE)
set(SNDFILE ${LIBDIR}/sndfile)
set(SNDFILE_INCLUDE_DIRS ${SNDFILE}/include)
set(SNDFILE_LIBRARIES libsndfile-1)
set(SNDFILE_LIBPATH ${SNDFILE}/lib) # TODO, deprecate
endif()
if(WITH_RAYOPTIMIZATION AND SUPPORT_SSE_BUILD)
add_definitions(-D__SSE__ -D__MMX__)
endif()
if(WITH_CYCLES_OSL)
set(CYCLES_OSL ${LIBDIR}/osl CACHE PATH "Path to OpenShadingLanguage installation")
find_library(OSL_LIB_EXEC NAMES oslexec PATHS ${CYCLES_OSL}/lib)
find_library(OSL_LIB_COMP NAMES oslcomp PATHS ${CYCLES_OSL}/lib)
find_library(OSL_LIB_QUERY NAMES oslquery PATHS ${CYCLES_OSL}/lib)
Minor changes to CMakeLists.txt to enable debug builds on VS2013. Fix for finding LLVM and OSL debug libs.
2014-02-24 17:53:14 +01:00
find_library(OSL_LIB_EXEC_DEBUG NAMES oslexec_d PATHS ${CYCLES_OSL}/lib)
find_library(OSL_LIB_COMP_DEBUG NAMES oslcomp_d PATHS ${CYCLES_OSL}/lib)
find_library(OSL_LIB_QUERY_DEBUG NAMES oslquery_d PATHS ${CYCLES_OSL}/lib)
list(APPEND OSL_LIBRARIES optimized ${OSL_LIB_COMP} optimized ${OSL_LIB_EXEC} optimized ${OSL_LIB_QUERY} debug ${OSL_LIB_EXEC_DEBUG} debug ${OSL_LIB_COMP_DEBUG} debug ${OSL_LIB_QUERY_DEBUG})
Cycles: Synchronize changes with standalone repository This changes were done in original commit of the standalone Cycles repository and needed here for easier patch synchronization.
2014-12-29 10:48:21 +01:00
find_path(OSL_INCLUDE_DIR OSL/oslclosure.h PATHS ${CYCLES_OSL}/include)
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
find_program(OSL_COMPILER NAMES oslc PATHS ${CYCLES_OSL}/bin)
Cycles: Synchronize changes with standalone repository This changes were done in original commit of the standalone Cycles repository and needed here for easier patch synchronization.
2014-12-29 10:48:21 +01:00
if(OSL_INCLUDE_DIR AND OSL_LIBRARIES AND OSL_COMPILER)
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
set(OSL_FOUND TRUE)
else()
message(STATUS "OSL not found")
CMake: disable OSL if its not found
2014-11-21 13:07:18 +01:00
set(WITH_CYCLES_OSL OFF)
More CMakeLists.txt changes Summary: I added a function that adds all libdir/* to CMAKE_PREFIX_PATH : further there where two places where if(MSVC) else (mingq) where defined after each other. I moved those into one place. The things common to MSVC and mingw are now blow the special code as we set libdir and such things depending on compiler. Besides find_package() working and some cleanups there should be no functional changes Reviewers: dingto Reviewed By: dingto Differential Revision: http://developer.blender.org/D127
2013-12-22 23:24:47 +01:00
endif()
endif()
Fix CMake build system for Windows Add support for OPTION WITH_OPENCOLLADA for Windows
2009-11-11 01:02:49 +01:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
elseif(APPLE)
OSX/cmake: ensure newest Xcode compatibility, important: still needs a patched cmake ( see error you will get if missed ), patched cmake provided here: http://www.jensverwiebe.de/Blender/CMake%202.8-7patched.zip
2012-03-10 17:21:48 +01:00
if(${CMAKE_OSX_DEPLOYMENT_TARGET} STREQUAL "10.5" OR ${CMAKE_OSX_DEPLOYMENT_TARGET} STRGREATER "10.5")
OSX/cmake: use CMAKE_XCODE_ATTRIBUTE rather than CMAKE_OSX_SYSROOT and set min deployment target to 10.6 now
2013-11-15 20:05:23 +01:00
set(WITH_LIBS10.5 ON CACHE BOOL "Use 10.5 libs" FORCE) # valid also for 10.6/7/8/9
CMake/OSX: Bugfix [#26375]: Add default values for the OSX architecture: x86_64 (also used to select the python dynlibs that'll be bundled with the application). Set deployment target to be 10.5 by default. Fix broken build introduced by recent source/creator/CMakeList.txt cleanup
2011-03-07 22:28:36 +01:00
endif()
CMake: show error on missing LIBDIR early on Previously CMake would show many messages about missing libs before checking for a missing LIBDIR. Now show the error immediately and exit. Also allow for custom LIBDIR on OSX.
2016-02-26 03:42:56 +01:00
if(NOT DEFINED LIBDIR)
if(WITH_LIBS10.5)
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/darwin-9.x.universal)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
else()
CMake: show error on missing LIBDIR early on Previously CMake would show many messages about missing libs before checking for a missing LIBDIR. Now show the error immediately and exit. Also allow for custom LIBDIR on OSX.
2016-02-26 03:42:56 +01:00
if(CMAKE_OSX_ARCHITECTURES MATCHES i386)
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/darwin-8.x.i386)
else()
set(LIBDIR ${CMAKE_SOURCE_DIR}/../lib/darwin-8.0.0-powerpc)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
CMake: show error on missing LIBDIR early on Previously CMake would show many messages about missing libs before checking for a missing LIBDIR. Now show the error immediately and exit. Also allow for custom LIBDIR on OSX.
2016-02-26 03:42:56 +01:00
else()
message(STATUS "Using pre-compiled LIBDIR: ${LIBDIR}")
endif()
if(NOT EXISTS "${LIBDIR}/")
message(FATAL_ERROR "Mac OSX requires pre-compiled libs at: '${LIBDIR}'")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
white space commit. (2 spaces -> tab). Was annoying to use a different editor for cmake only. theeth says this should be ok with gsoc and merges from branches.
2009-09-06 03:51:23 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_OPENAL)
find_package(OpenAL)
if(OPENAL_FOUND)
set(WITH_OPENAL ON)
set(OPENAL_INCLUDE_DIR "${LIBDIR}/openal/include")
else()
set(WITH_OPENAL OFF)
endif()
endif()
OpenSubdiv: Commit of OpenSubdiv integration into Blender This commit contains all the remained parts needed for initial integration of OpenSubdiv into Blender's subdivision surface code. Includes both GPU and CPU backends which works in the following way: - When SubSurf modifier is the last in the modifiers stack then GPU pipeline of OpenSubdiv is used, making viewport performance as fast as possible. This also requires graphscard with GLSL 1.5 support. If this requirement is not met, then no GPU pipeline is used at all. - If SubSurf is not a last modifier or if DerivesMesh is being evaluated for rendering then CPU limit evaluation API from OpenSubdiv is used. This only replaces the legacy evaluation code from CCGSubSurf_legacy, but keeps CCG structures exactly the same as they used to be for ages now. This integration is fully covered with ifdef and not enabled by default because there are several TODOs to be solved first: - Face varying data interpolation is not really cleanly implemented for GPU in OpenSubdiv 3.0. It is also not implemented for limit evaluation API. This basically means we'll have really hard time supporting UVs. - Limit evaluation only works with adaptivly subdivided meshes so far, which basically means all the points of CCG are pushed to the limit. This gives different result from old code. - There are some serious optimizations possible on the topology refiner creation, which would speed up initial OpenSubdiv mesh creation. - There are some hardcoded asumptions in the GPU and DerivedMesh areas which could be generalized. That's something where Antony and Campbell can help, making it so the code is structured in a way which is reusable by all planned viewport projects. - There are also some workarounds in the dependency graph to make sure OpenGL buffers are only freed from the main thread. Those who'll be wanting to make experiments with this code should grab dev branch (NOT master) from https://github.com/Nazg-Gul/OpenSubdiv/tree/dev There are some patches applied in there which we're working on on getting into upstream.
2015-07-20 16:08:06 +02:00
if(WITH_OPENSUBDIV)
set(OPENSUBDIV ${LIBDIR}/opensubdiv)
set(OPENSUBDIV_LIBPATH ${OPENSUBDIV}/lib)
find_library(OSL_LIB_UTIL NAMES osdutil PATHS ${OPENSUBDIV_LIBPATH})
find_library(OSL_LIB_CPU NAMES osdCPU PATHS ${OPENSUBDIV_LIBPATH})
find_library(OSL_LIB_GPU NAMES osdGPU PATHS ${OPENSUBDIV_LIBPATH})
set(OPENSUBDIV_INCLUDE_DIR ${OPENSUBDIV}/include)
set(OPENSUBDIV_INCLUDE_DIRS ${OPENSUBDIV_INCLUDE_DIR})
list(APPEND OPENSUBDIV_LIBRARIES ${OSL_LIB_UTIL} ${OSL_LIB_CPU} ${OSL_LIB_GPU})
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_JACK)
revert muddle in changing jack in msvc instead apple
2012-11-11 19:28:45 +01:00
find_library(JACK_FRAMEWORK
NAMES jackmp
)
set(JACK_INCLUDE_DIRS ${JACK_FRAMEWORK}/headers)
if(NOT JACK_FRAMEWORK)
set(WITH_JACK OFF)
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
if(WITH_CODEC_SNDFILE)
set(SNDFILE ${LIBDIR}/sndfile)
added FindSndFile cmake module to replace inline checks.
2011-06-18 14:12:19 +02:00
set(SNDFILE_INCLUDE_DIRS ${SNDFILE}/include)
set(SNDFILE_LIBRARIES sndfile FLAC ogg vorbis vorbisenc)
set(SNDFILE_LIBPATH ${SNDFILE}/lib ${FFMPEG}/lib) # TODO, deprecate
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 08:55:45 +02:00
if(WITH_PYTHON)
CMake/SCons: set Python to 3.5
2015-11-27 07:24:11 +01:00
# we use precompiled libraries for py 3.5 and up by default
OSX bump python to 3.5
2015-11-24 23:18:25 +01:00
set(PYTHON_VERSION 3.5)
WITH_PYTHON_FRAMEWORK cmake option for OSX This option allow Blender to be linked against the Framework python It's useful if you want to have blenderplayer and bpy in the same application and need to avoid PyThread problems. patch reviewed by Jens Verwiebe before 2.66. He may want to change something though. (also small: I changed: /Library/Frameworks/Python.framework/Versions//python by /Library/Frameworks/Python.framework/Versions//Python as the latter seems to be the norm)
2013-02-22 23:24:38 +01:00
if(NOT WITH_PYTHON_MODULE AND NOT WITH_PYTHON_FRAMEWORK)
OSX/Cmake: make bpy module work finally by linking against python3.2 framework
2012-01-16 21:10:38 +01:00
# normally cached but not since we include them with blender
OSX/cmake: py 3.3 migration
2012-11-19 12:45:25 +01:00
set(PYTHON_INCLUDE_DIR "${LIBDIR}/python/include/python${PYTHON_VERSION}m")
Fix T46623: OSX bpy.app.binary_path_python incorrect CMake's PYTHON_EXECUTABLE wasn't set.
2016-03-30 13:44:44 +02:00
set(PYTHON_EXECUTABLE "${LIBDIR}/python/bin/python${PYTHON_VERSION}m")
OSX/cmake: py 3.3 migration
2012-11-19 12:45:25 +01:00
set(PYTHON_LIBRARY python${PYTHON_VERSION}m)
OSX/Cmake: make bpy module work finally by linking against python3.2 framework
2012-01-16 21:10:38 +01:00
set(PYTHON_LIBPATH "${LIBDIR}/python/lib/python${PYTHON_VERSION}")
# set(PYTHON_LINKFLAGS "-u _PyMac_Error") # won't build with this enabled
else()
# module must be compiled against Python framework
set(PYTHON_INCLUDE_DIR "/Library/Frameworks/Python.framework/Versions/${PYTHON_VERSION}/include/python${PYTHON_VERSION}m")
Fix T46623: OSX bpy.app.binary_path_python incorrect CMake's PYTHON_EXECUTABLE wasn't set.
2016-03-30 13:44:44 +02:00
set(PYTHON_EXECUTABLE "/Library/Frameworks/Python.framework/Versions/${PYTHON_VERSION}/bin/python${PYTHON_VERSION}m")
OSX/Cmake: make bpy module work finally by linking against python3.2 framework
2012-01-16 21:10:38 +01:00
#set(PYTHON_LIBRARY python${PYTHON_VERSION})
OSX/cmake/scons: python version foolproof
2013-02-05 20:49:53 +01:00
set(PYTHON_LIBPATH "/Library/Frameworks/Python.framework/Versions/${PYTHON_VERSION}/lib/python${PYTHON_VERSION}/config-${PYTHON_VERSION}m")
OSX/Cmake: make bpy module work finally by linking against python3.2 framework
2012-01-16 21:10:38 +01:00
#set(PYTHON_LINKFLAGS "-u _PyMac_Error -framework Python") # won't build with this enabled
endif()
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 08:55:45 +02:00
# uncached vars
set(PYTHON_INCLUDE_DIRS "${PYTHON_INCLUDE_DIR}")
set(PYTHON_LIBRARIES "${PYTHON_LIBRARY}")
Fix T46623: OSX bpy.app.binary_path_python incorrect CMake's PYTHON_EXECUTABLE wasn't set.
2016-03-30 13:44:44 +02:00
if(NOT EXISTS "${PYTHON_EXECUTABLE}")
message(FATAL_ERROR "Python executable missing: ${PYTHON_EXECUTABLE}")
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
if(WITH_FFTW3)
set(FFTW3 ${LIBDIR}/fftw3)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 16:12:54 +02:00
set(FFTW3_INCLUDE_DIRS ${FFTW3}/include)
set(FFTW3_LIBRARIES fftw3)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(FFTW3_LIBPATH ${FFTW3}/lib)
endif()
set(PNG_LIBRARIES png)
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 15:43:13 +01:00
set(JPEG_LIBRARIES jpeg)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(ZLIB /usr)
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 15:43:13 +01:00
set(ZLIB_INCLUDE_DIRS "${ZLIB}/include")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(ZLIB_LIBRARIES z bz2)
set(FREETYPE ${LIBDIR}/freetype)
set(FREETYPE_INCLUDE_DIRS ${FREETYPE}/include ${FREETYPE}/include/freetype2)
set(FREETYPE_LIBPATH ${FREETYPE}/lib)
set(FREETYPE_LIBRARY freetype)
if(WITH_IMAGE_OPENEXR)
set(OPENEXR ${LIBDIR}/openexr)
fix osx/ols compile after #50876
2012-09-25 20:30:37 +02:00
set(OPENEXR_INCLUDE_DIR ${OPENEXR}/include)
CMake OpenVDB support on OS X Reviewers: kevindietrich, sergey Differential Revision: https://developer.blender.org/D1773
2016-02-06 13:17:53 +01:00
set(OPENEXR_INCLUDE_DIRS ${OPENEXR_INCLUDE_DIR} ${OPENEXR}/include/OpenEXR)
replace own inline cmake include search logic for a typical FindXXX.cmake module.
2011-06-15 14:09:02 +02:00
set(OPENEXR_LIBRARIES Iex Half IlmImf Imath IlmThread)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(OPENEXR_LIBPATH ${OPENEXR}/lib)
endif()
if(WITH_CODEC_FFMPEG)
set(FFMPEG ${LIBDIR}/ffmpeg)
rename cmake include/libraries to conform with suggested cmake names
2011-06-18 16:12:54 +02:00
set(FFMPEG_INCLUDE_DIRS ${FFMPEG}/include)
set(FFMPEG_LIBRARIES avcodec avdevice avformat avutil mp3lame swscale x264 xvidcore theora theoradec theoraenc vorbis vorbisenc vorbisfile ogg)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(FFMPEG_LIBPATH ${FFMPEG}/lib)
endif()
formatting edits only
2011-09-30 17:51:58 +02:00
find_library(SYSTEMSTUBS_LIBRARY
NAMES
SystemStubs
Fixes an issue with OSX Lion Also cleaned up the python detection for OSX Kent
2011-08-02 19:35:07 +02:00
PATHS
)
mark_as_advanced(SYSTEMSTUBS_LIBRARY)
if(SYSTEMSTUBS_LIBRARY)
CMake: use a list for PLATFORM_LINKLIBS
2014-07-25 06:35:53 +02:00
list(APPEND PLATFORM_LINKLIBS stdc++ SystemStubs)
whitespace cleanup
2011-09-25 14:31:21 +02:00
else()
CMake: use a list for PLATFORM_LINKLIBS
2014-07-25 06:35:53 +02:00
list(APPEND PLATFORM_LINKLIBS stdc++)
Fixes an issue with OSX Lion Also cleaned up the python detection for OSX Kent
2011-08-02 19:35:07 +02:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
OSX: complety remove the cocoa options, definitions and conditionals now
2013-11-05 16:37:59 +01:00
set(PLATFORM_CFLAGS "-pipe -funsigned-char")
set(PLATFORM_LINKFLAGS "-fexceptions -framework CoreServices -framework Foundation -framework IOKit -framework AppKit -framework Cocoa -framework Carbon -framework AudioUnit -framework AudioToolbox -framework CoreAudio")
Quicktime: remove backend with the old quicktime API, and keep the QTKit backend. This means that if you have WITH_BF_QUICKTIME or WITH_CODEC_QUICKTIME enabled, it will always use QTKit. The old backend was only used on 32 bit OS X builds, now 32 and 64 bit builds will give consistent input/output. On Windows or Linux quicktime isn't being used.
2013-11-06 02:45:15 +01:00
if(WITH_CODEC_QUICKTIME)
OSX: complety remove the cocoa options, definitions and conditionals now
2013-11-05 16:37:59 +01:00
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -framework QTKit")
if(CMAKE_OSX_ARCHITECTURES MATCHES i386)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -framework QuickTime")
OSX: complety remove the cocoa options, definitions and conditionals now
2013-11-05 16:37:59 +01:00
# libSDL still needs 32bit carbon quicktime
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
OSX: complety remove the cocoa options, definitions and conditionals now
2013-11-05 16:37:59 +01:00
endif()
enable NDOF by default with cmake again, but check if it can be found on OSX, if not disable. I cant test this but at least if I made a mistake it will just not find the SDK and disable. an osx dev needs to test.
2011-08-03 16:18:02 +02:00
OSX: complety remove the cocoa options, definitions and conditionals now
2013-11-05 16:37:59 +01:00
# XXX - SOME MAC DEV PLEASE TEST WITH THE SDK INSTALLED!
# ALSO SHOULD BE MOVED INTO OWN MODULE WHEN FUNCTIONAL
if(WITH_INPUT_NDOF)
# This thread it *should* work and check the framework - campbell
# http://www.cmake.org/pipermail/cmake/2005-December/007740.html
find_library(3DCONNEXION_CLIENT_FRAMEWORK
NAMES 3DconnexionClient
)
if(NOT 3DCONNEXION_CLIENT_FRAMEWORK)
set(WITH_INPUT_NDOF OFF)
endif()
fix for building ndof with cmake on osx
2011-08-07 17:06:35 +02:00
OSX: complety remove the cocoa options, definitions and conditionals now
2013-11-05 16:37:59 +01:00
if(WITH_INPUT_NDOF)
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -F/Library/Frameworks -weak_framework 3DconnexionClient")
set(NDOF_INCLUDE_DIRS /Library/Frameworks/3DconnexionClient.framework/Headers )
enable NDOF by default with cmake again, but check if it can be found on OSX, if not disable. I cant test this but at least if I made a mistake it will just not find the SDK and disable. an osx dev needs to test.
2011-08-03 16:18:02 +02:00
endif()
OSX: complety remove the cocoa options, definitions and conditionals now
2013-11-05 16:37:59 +01:00
endif()
Replacing gettext i18n backend by boost::locale one. This commit adds a small and simplistic C wrapper around boost's locale library as intern/locale, and heavily simplifies/reduces Blender's own i18n code (under blenfont/ dir). And it adds back UI translation on windows' official builds (with msvc)! Note to platform maintainers: iconv and gettext (libintl) can now be removed from precompiled libs (not gettext binaries, under windows, of course ;) ). Note to MinGW32/64 users: boost_locale lib has not yet been uploaded for those build env, please disable WITH_INTERNATIONAL for now (hopefully will be fixed very soon, have contacted psy-fy).
2012-11-11 17:54:26 +01:00
Restore my work overwritten by 52106 and some further reordering for cmake 2.8.10, todo: take into account missing symlinks for Library and /usr/local in newest xcode, affects ndof and jack
2012-11-11 19:06:10 +01:00
if(WITH_JACK)
OSX/cmake: assure finding jack framework
2013-09-10 20:56:33 +02:00
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -F/Library/Frameworks -weak_framework jackmp")
Restore my work overwritten by 52106 and some further reordering for cmake 2.8.10, todo: take into account missing symlinks for Library and /usr/local in newest xcode, affects ndof and jack
2012-11-11 19:06:10 +01:00
endif()
OSX/Cmake: make bpy module work finally by linking against python3.2 framework
2012-01-16 21:10:38 +01:00
WITH_PYTHON_FRAMEWORK cmake option for OSX This option allow Blender to be linked against the Framework python It's useful if you want to have blenderplayer and bpy in the same application and need to avoid PyThread problems. patch reviewed by Jens Verwiebe before 2.66. He may want to change something though. (also small: I changed: /Library/Frameworks/Python.framework/Versions//python by /Library/Frameworks/Python.framework/Versions//Python as the latter seems to be the norm)
2013-02-22 23:24:38 +01:00
if(WITH_PYTHON_MODULE OR WITH_PYTHON_FRAMEWORK)
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} /Library/Frameworks/Python.framework/Versions/${PYTHON_VERSION}/Python")# force cmake to link right framework
OSX/Cmake: make bpy module work finally by linking against python3.2 framework
2012-01-16 21:10:38 +01:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_OPENCOLLADA)
set(OPENCOLLADA ${LIBDIR}/opencollada)
opencollada find module. hopefully solves the problem where includes can in an `/include` subdir or not.
2011-08-24 18:04:35 +02:00
set(OPENCOLLADA_INCLUDE_DIRS
${LIBDIR}/opencollada/include/COLLADAStreamWriter
${LIBDIR}/opencollada/include/COLLADABaseUtils
${LIBDIR}/opencollada/include/COLLADAFramework
${LIBDIR}/opencollada/include/COLLADASaxFrameworkLoader
${LIBDIR}/opencollada/include/GeneratedSaxParser
)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(OPENCOLLADA_LIBPATH ${OPENCOLLADA}/lib)
OSX/cmake: update buildsys for new osl/llvm/oiio usage, also use osx_locals.map in cmake - fixes T40887
2014-07-26 18:10:10 +02:00
set(OPENCOLLADA_LIBRARIES "OpenCOLLADASaxFrameworkLoader -lOpenCOLLADAFramework -lOpenCOLLADABaseUtils -lOpenCOLLADAStreamWriter -lMathMLSolver -lGeneratedSaxParser -lxml2 -lbuffer -lftoa")
OSX/cmake: fix linking utf-functions if llvm is disabled
2014-07-29 19:46:05 +02:00
# Use UTF functions from collada if LLVM is not enabled
if(NOT WITH_LLVM)
set(OPENCOLLADA_LIBRARIES "${OPENCOLLADA_LIBRARIES} -lUTF")
endif()
CMake build system update - Extending CMakeLists.txt to support builds with VC2012. - Fix some typo in CMakeLists.txt - Introduces experimental WITH_AVX_CPU to build with /arch:AVX (VC11 only)
2013-05-14 18:16:25 +02:00
# pcre is bundled with openCollada
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
#set(PCRE ${LIBDIR}/pcre)
#set(PCRE_LIBPATH ${PCRE}/lib)
fix for error linking opencollada on linux.
2011-09-12 15:58:13 +02:00
set(PCRE_LIBRARIES pcre)
Fix CMake build system for Windows Add support for OPTION WITH_OPENCOLLADA for Windows
2009-11-11 01:02:49 +01:00
#libxml2 is used
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
#set(EXPAT ${LIBDIR}/expat)
#set(EXPAT_LIBPATH ${EXPAT}/lib)
set(EXPAT_LIB)
endif()
if(WITH_SDL)
set(SDL ${LIBDIR}/sdl)
set(SDL_INCLUDE_DIR ${SDL}/include)
Switch to SDL2 on OSX
2014-11-19 19:41:41 +01:00
set(SDL_LIBRARY SDL2)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(SDL_LIBPATH ${SDL}/lib)
Switch to SDL2 on OSX
2014-11-19 19:41:41 +01:00
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -lazy_framework ForceFeedback")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
set(PNG "${LIBDIR}/png")
CMake: correct include dirs
2014-07-01 01:36:11 +02:00
set(PNG_INCLUDE_DIRS "${PNG}/include")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(PNG_LIBPATH ${PNG}/lib)
set(JPEG "${LIBDIR}/jpeg")
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 15:43:13 +01:00
set(JPEG_INCLUDE_DIR "${JPEG}/include")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(JPEG_LIBPATH ${JPEG}/lib)
if(WITH_IMAGE_TIFF)
set(TIFF ${LIBDIR}/tiff)
set(TIFF_INCLUDE_DIR ${TIFF}/include)
set(TIFF_LIBRARY tiff)
set(TIFF_LIBPATH ${TIFF}/lib)
endif()
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
if(WITH_INPUT_NDOF)
first attempt at CMake fix (untested)
2011-06-28 01:24:24 +02:00
# linker needs "-weak_framework 3DconnexionClient"
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
if(WITH_BOOST)
set(BOOST ${LIBDIR}/boost)
set(BOOST_INCLUDE_DIR ${BOOST}/include)
OSX/osl: link also boost_wave, cause we use its preprocessor now
2012-11-19 20:10:31 +01:00
set(BOOST_LIBRARIES boost_date_time-mt boost_filesystem-mt boost_regex-mt boost_system-mt boost_thread-mt boost_wave-mt)
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
if(WITH_INTERNATIONAL)
Replacing gettext i18n backend by boost::locale one. This commit adds a small and simplistic C wrapper around boost's locale library as intern/locale, and heavily simplifies/reduces Blender's own i18n code (under blenfont/ dir). And it adds back UI translation on windows' official builds (with msvc)! Note to platform maintainers: iconv and gettext (libintl) can now be removed from precompiled libs (not gettext binaries, under windows, of course ;) ). Note to MinGW32/64 users: boost_locale lib has not yet been uploaded for those build env, please disable WITH_INTERNATIONAL for now (hopefully will be fixed very soon, have contacted psy-fy).
2012-11-11 17:54:26 +01:00
list(APPEND BOOST_LIBRARIES boost_locale-mt)
endif()
Cycles: network render code updated for latest changes and improved This actually works somewhat now, although viewport rendering is broken and any kind of network error or connection failure will kill Blender. * Experimental WITH_CYCLES_NETWORK cmake option * Networked Device is shown as an option next to CPU and GPU Compute * Various updates to work with the latest Cycles code * Locks and thread safety for RPC calls and tiles * Refactored pointer mapping code * Fix error in CPU brand string retrieval code This includes work by Doug Gale, Martijn Berger and Brecht Van Lommel. Reviewers: brecht Differential Revision: http://developer.blender.org/D36
2013-12-07 02:29:53 +01:00
if(WITH_CYCLES_NETWORK)
list(APPEND BOOST_LIBRARIES boost_serialization-mt)
endif()
CMake OpenVDB support on OS X Reviewers: kevindietrich, sergey Differential Revision: https://developer.blender.org/D1773
2016-02-06 13:17:53 +01:00
if(WITH_OPENVDB)
list(APPEND BOOST_LIBRARIES boost_iostreams-mt)
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
set(BOOST_LIBPATH ${BOOST}/lib)
set(BOOST_DEFINITIONS)
endif()
OSX/cmake: fix a recently reported dependency issue
2014-04-13 18:04:35 +02:00
if(WITH_INTERNATIONAL OR WITH_CODEC_FFMPEG)
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -liconv") # boost_locale and ffmpeg needs it !
endif()
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
if(WITH_OPENIMAGEIO)
set(OPENIMAGEIO ${LIBDIR}/openimageio)
set(OPENIMAGEIO_INCLUDE_DIRS ${OPENIMAGEIO}/include)
OSX/cmake: after osl librenew with globals patch, forcing oiio is not longer needed
2012-10-11 12:15:37 +02:00
set(OPENIMAGEIO_LIBRARIES ${OPENIMAGEIO}/lib/libOpenImageIO.a ${PNG_LIBRARIES} ${JPEG_LIBRARIES} ${TIFF_LIBRARY} ${OPENEXR_LIBRARIES} ${ZLIB_LIBRARIES})
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
set(OPENIMAGEIO_LIBPATH ${OPENIMAGEIO}/lib ${JPEG_LIBPATH} ${PNG_LIBPATH} ${TIFF_LIBPATH} ${OPENEXR_LIBPATH} ${ZLIB_LIBPATH})
set(OPENIMAGEIO_DEFINITIONS "-DOIIO_STATIC_BUILD")
CMake: Auto-detect path to idiff application in FindOpenImageIO.cmake Not used at this moment, but will be real soon with new ctests.
2015-01-22 11:52:50 +01:00
set(OPENIMAGEIO_IDIFF "${LIBDIR}/openimageio/bin/idiff")
CMake: Boost and OpenImageIO building support (unused still).
2011-11-07 16:44:09 +01:00
endif()
Color Management, Stage 1: Initial OpenColorIO library integration This commit integrates support of OpenColorIO library into build systems. It also contains C-API for OpenColorIO library which could be used by Blender. CMake has got find rules familiar to OpenImageIO's one which makes it easier for build system to find needed libraries and includes. Scons only could use explicitly defined paths to libraries and includes. C-API would be compiled and Blender would be linked against C-API and OpenColorIO but it wouldn't affect on Blender behavior at all. OpenColorIO could be disabled by setting up WITH_OCIO to Off in CMake and setting WITH_BF_OCIO in Scons.
2012-09-15 12:03:17 +02:00
if(WITH_OPENCOLORIO)
set(OPENCOLORIO ${LIBDIR}/opencolorio)
set(OPENCOLORIO_INCLUDE_DIRS ${OPENCOLORIO}/include)
set(OPENCOLORIO_LIBRARIES OpenColorIO tinyxml yaml-cpp)
set(OPENCOLORIO_LIBPATH ${OPENCOLORIO}/lib)
endif()
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
if(WITH_OPENVDB)
set(OPENVDB ${LIBDIR}/openvdb)
set(OPENVDB_INCLUDE_DIRS ${OPENVDB}/include)
CMake OpenVDB support on OS X Reviewers: kevindietrich, sergey Differential Revision: https://developer.blender.org/D1773
2016-02-06 13:17:53 +01:00
set(TBB_INCLUDE_DIRS ${LIBDIR}/tbb/include)
set(TBB_LIBRARIES ${LIBDIR}/tbb/lib/libtbb.a)
Mac OS X Openvdb, add blosc support. even if WITH_OPENVDB_BLOSC is off openvdb still contains 1 reference to snappy so we link with it always
2016-02-19 11:24:07 +01:00
set(OPENVDB_LIBRARIES openvdb blosc ${TBB_LIBRARIES})
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
set(OPENVDB_LIBPATH ${LIBDIR}/openvdb/lib)
set(OPENVDB_DEFINITIONS)
endif()
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
if(WITH_LLVM)
CMake: rename LLVM_DIRECTORY -> LLVM_ROOT_DIR Matching convention with all other libs
2015-03-05 05:36:22 +01:00
set(LLVM_ROOT_DIR ${LIBDIR}/llvm CACHE PATH "Path to the LLVM installation")
OSX/cmake: little tweak for last commit
2014-07-26 18:39:45 +02:00
set(LLVM_VERSION "3.4" CACHE STRING "Version of LLVM to use")
CMake: rename LLVM_DIRECTORY -> LLVM_ROOT_DIR Matching convention with all other libs
2015-03-05 05:36:22 +01:00
if(EXISTS "${LLVM_ROOT_DIR}/bin/llvm-config")
set(LLVM_CONFIG "${LLVM_ROOT_DIR}/bin/llvm-config")
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
else()
set(LLVM_CONFIG llvm-config)
endif()
execute_process(COMMAND ${LLVM_CONFIG} --version
OUTPUT_VARIABLE LLVM_VERSION
OUTPUT_STRIP_TRAILING_WHITESPACE)
execute_process(COMMAND ${LLVM_CONFIG} --prefix
CMake: rename LLVM_DIRECTORY -> LLVM_ROOT_DIR Matching convention with all other libs
2015-03-05 05:36:22 +01:00
OUTPUT_VARIABLE LLVM_ROOT_DIR
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
OUTPUT_STRIP_TRAILING_WHITESPACE)
execute_process(COMMAND ${LLVM_CONFIG} --libdir
rename LLVM_LIB_DIR to LLVM_LIBPATH to match other cmake vars.
2013-09-25 18:31:54 +02:00
OUTPUT_VARIABLE LLVM_LIBPATH
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
OUTPUT_STRIP_TRAILING_WHITESPACE)
find_library(LLVM_LIBRARY
CMake: LLVM configuration tweak to check if llvm-config actually exists before using it (patch by IRIE Shinsuke). Also search for any library instead of just static ones.
2012-11-09 04:10:29 +01:00
NAMES LLVMAnalysis # first of a whole bunch of libs to get
rename LLVM_LIB_DIR to LLVM_LIBPATH to match other cmake vars.
2013-09-25 18:31:54 +02:00
PATHS ${LLVM_LIBPATH})
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
CMake: rename LLVM_DIRECTORY -> LLVM_ROOT_DIR Matching convention with all other libs
2015-03-05 05:36:22 +01:00
if(LLVM_LIBRARY AND LLVM_ROOT_DIR AND LLVM_LIBPATH)
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
if(LLVM_STATIC)
# if static LLVM libraries were requested, use llvm-config to generate
# the list of what libraries we need, and substitute that in the right
# way for LLVM_LIBRARY.
execute_process(COMMAND ${LLVM_CONFIG} --libfiles
OUTPUT_VARIABLE LLVM_LIBRARY
OUTPUT_STRIP_TRAILING_WHITESPACE)
string(REPLACE " " ";" LLVM_LIBRARY ${LLVM_LIBRARY})
OSX/cmake: allow for llvm dynamic builds too, but prefer static
2014-08-06 12:48:06 +02:00
else()
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -lLLVM-3.4")
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
endif()
else()
message(FATAL_ERROR "LLVM not found.")
endif()
endif()
OSL cmake cleanup: * Removed unused lib and include directories (also one bad 'src' include that wouldn't work anyway) * Copied cmake library finding to APPLE and WIN32 sections. These may need some adjustment for their respective OS.
2012-09-10 10:38:51 +02:00
if(WITH_CYCLES_OSL)
set(CYCLES_OSL ${LIBDIR}/osl CACHE PATH "Path to OpenShadingLanguage installation")
find_library(OSL_LIB_EXEC NAMES oslexec PATHS ${CYCLES_OSL}/lib)
find_library(OSL_LIB_COMP NAMES oslcomp PATHS ${CYCLES_OSL}/lib)
find_library(OSL_LIB_QUERY NAMES oslquery PATHS ${CYCLES_OSL}/lib)
# WARNING! depends on correct order of OSL libs linking
OSL/cmake: the non-intrusive parts, so other os-maintainers can take code over
2012-09-24 21:06:28 +02:00
list(APPEND OSL_LIBRARIES ${OSL_LIB_COMP} -force_load ${OSL_LIB_EXEC} ${OSL_LIB_QUERY})
Cycles: Synchronize changes with standalone repository This changes were done in original commit of the standalone Cycles repository and needed here for easier patch synchronization.
2014-12-29 10:48:21 +01:00
find_path(OSL_INCLUDE_DIR OSL/oslclosure.h PATHS ${CYCLES_OSL}/include)
OSL cmake cleanup: * Removed unused lib and include directories (also one bad 'src' include that wouldn't work anyway) * Copied cmake library finding to APPLE and WIN32 sections. These may need some adjustment for their respective OS.
2012-09-10 10:38:51 +02:00
find_program(OSL_COMPILER NAMES oslc PATHS ${CYCLES_OSL}/bin)
Cycles: Synchronize changes with standalone repository This changes were done in original commit of the standalone Cycles repository and needed here for easier patch synchronization.
2014-12-29 10:48:21 +01:00
if(OSL_INCLUDE_DIR AND OSL_LIBRARIES AND OSL_COMPILER)
OSL cmake cleanup: * Removed unused lib and include directories (also one bad 'src' include that wouldn't work anyway) * Copied cmake library finding to APPLE and WIN32 sections. These may need some adjustment for their respective OS.
2012-09-10 10:38:51 +02:00
set(OSL_FOUND TRUE)
else()
message(STATUS "OSL not found")
CMake: disable OSL if its not found
2014-11-21 13:07:18 +01:00
set(WITH_CYCLES_OSL OFF)
OSL cmake cleanup: * Removed unused lib and include directories (also one bad 'src' include that wouldn't work anyway) * Copied cmake library finding to APPLE and WIN32 sections. These may need some adjustment for their respective OS.
2012-09-10 10:38:51 +02:00
endif()
endif()
OSX/CMAKE: make linking and bundling of clang omp lib work, Cmake will still not find -fopenmp working, so the user must set WITH_OPENMP and flags manually
2014-02-18 23:38:48 +01:00
OSX/cmake: Fix T40887 by detecting if we use an Apple compiler, disable omp in this case
2014-06-30 13:37:00 +02:00
if(WITH_OPENMP)
execute_process(COMMAND ${CMAKE_C_COMPILER} --version OUTPUT_VARIABLE COMPILER_VENDOR)
string(SUBSTRING "${COMPILER_VENDOR}" 0 5 VENDOR_NAME) # truncate output
OSX/cmake: Real fix for T40887, the reason was find_package(OpenMP) silently failing, breaking all other tests following - tested gcc 4.8.1 works again - tested clang-omp in libs works again - i assume atm., if we only use vanilla clang it is the one in darwin libs
2014-07-07 19:20:24 +02:00
if(${VENDOR_NAME} MATCHES "Apple") # Apple does not support OpenMP reliable with gcc and not with clang
OSX/cmake: Fix T40887 by detecting if we use an Apple compiler, disable omp in this case
2014-06-30 13:37:00 +02:00
set(WITH_OPENMP OFF)
else() # vanilla gcc or clang_omp support OpenMP
OSX/cmake: Real fix for T40887, the reason was find_package(OpenMP) silently failing, breaking all other tests following - tested gcc 4.8.1 works again - tested clang-omp in libs works again - i assume atm., if we only use vanilla clang it is the one in darwin libs
2014-07-07 19:20:24 +02:00
message(STATUS "Using special OpenMP enabled compiler !") # letting find_package(OpenMP) module work for gcc
if(CMAKE_C_COMPILER_ID MATCHES "Clang") # clang-omp in darwin libs
set(OPENMP_FOUND ON)
set(OpenMP_C_FLAGS "-fopenmp" CACHE STRING "C compiler flags for OpenMP parallization" FORCE)
set(OpenMP_CXX_FLAGS "-fopenmp" CACHE STRING "C++ compiler flags for OpenMP parallization" FORCE)
include_directories(${LIBDIR}/openmp/include)
link_directories(${LIBDIR}/openmp/lib)
# This is a workaround for our helperbinaries ( datatoc, masgfmt, ... ),
# They are linked also to omp lib, so we need it in builddir for runtime exexcution, TODO: remove all unneeded dependencies from these
Just 2 comments cleaned
2014-11-16 17:12:49 +01:00
execute_process(COMMAND ditto -arch ${CMAKE_OSX_ARCHITECTURES} ${LIBDIR}/openmp/lib/libiomp5.dylib ${CMAKE_BINARY_DIR}/Resources/lib/libiomp5.dylib) # for intermediate binaries, in respect to lib ID
OSX/cmake: Real fix for T40887, the reason was find_package(OpenMP) silently failing, breaking all other tests following - tested gcc 4.8.1 works again - tested clang-omp in libs works again - i assume atm., if we only use vanilla clang it is the one in darwin libs
2014-07-07 19:20:24 +02:00
endif()
OSX/cmake: Fix T40887 by detecting if we use an Apple compiler, disable omp in this case
2014-06-30 13:37:00 +02:00
endif()
OSX/CMAKE: make linking and bundling of clang omp lib work, Cmake will still not find -fopenmp working, so the user must set WITH_OPENMP and flags manually
2014-02-18 23:38:48 +01:00
endif()
OSL cmake cleanup: * Removed unused lib and include directories (also one bad 'src' include that wouldn't work anyway) * Copied cmake library finding to APPLE and WIN32 sections. These may need some adjustment for their respective OS.
2012-09-10 10:38:51 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
set(EXETYPE MACOSX_BUNDLE)
OSX/cmake: fix warning: go back to initial state, not the right way to get rid of this
2012-10-04 13:37:17 +02:00
set(CMAKE_C_FLAGS_DEBUG "-fno-strict-aliasing -g")
set(CMAKE_CXX_FLAGS_DEBUG "-fno-strict-aliasing -g")
OSX/cmake: simplificate compile conditions and silence lot of CLANG warnings
2012-10-01 16:03:02 +02:00
if(CMAKE_OSX_ARCHITECTURES MATCHES "x86_64" OR CMAKE_OSX_ARCHITECTURES MATCHES "i386")
set(CMAKE_CXX_FLAGS_RELEASE "-O2 -mdynamic-no-pic -msse -msse2 -msse3 -mssse3")
set(CMAKE_C_FLAGS_RELEASE "-O2 -mdynamic-no-pic -msse -msse2 -msse3 -mssse3")
CMake: check CMAKE_C_COMPILER_ID instead of CMAKE_CXX_COMPILER_ID While its possible to have different C/C++ compilers, we dont support this at the moment, so just check C compiler ID for now.
2013-12-02 01:36:33 +01:00
if(NOT CMAKE_C_COMPILER_ID MATCHES "Clang")
OSX/cmake: simplificate compile conditions and silence lot of CLANG warnings
2012-10-01 16:03:02 +02:00
set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -ftree-vectorize -fvariable-expansion-in-unroller")
set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} -ftree-vectorize -fvariable-expansion-in-unroller")
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
else()
set(CMAKE_C_FLAGS_RELEASE "-mdynamic-no-pic -fno-strict-aliasing")
set(CMAKE_CXX_FLAGS_RELEASE "-mdynamic-no-pic -fno-strict-aliasing")
endif()
Fix libmv build error on OS X with Xcode 5.
2013-09-09 14:15:14 +02:00
OSX/CMake: fix ftemplate condition
2013-10-24 20:46:00 +02:00
if(${XCODE_VERSION} VERSION_EQUAL 5 OR ${XCODE_VERSION} VERSION_GREATER 5)
# Xcode 5 is always using CLANG, which has too low template depth of 128 for libmv
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ftemplate-depth=1024")
misc minor changes - make cmake osx use of -ftemplate-depth match scons. - use array size within sizeof(), more compact. - replace AT with __func__ where the function is unique enough. - BLI_box_pack_2D -> 2d to match other functions. - rename new mesh normal calculation to mesh.calc_normals_split()
2013-09-10 21:23:39 +02:00
endif()
OSX/cmake: update buildsys for new osl/llvm/oiio usage, also use osx_locals.map in cmake - fixes T40887
2014-07-26 18:10:10 +02:00
# Get rid of eventually clashes, we export some symbols explicite as local
set(PLATFORM_LINKFLAGS "${PLATFORM_LINKFLAGS} -Xlinker -unexported_symbols_list -Xlinker ${CMAKE_SOURCE_DIR}/source/creator/osx_locals.map")
Fix T48250: suppress CMake ranlib warnings to avoid issue with Qt Creator Reviewed By: campbellbarton, brecht Differential Revision: https://developer.blender.org/D1942
2016-04-23 15:44:26 +02:00
Cleanup: cmake
2016-04-23 16:16:15 +02:00
# Suppress ranlib "has no symbols" warnings (workaround for T48250)
set(CMAKE_C_ARCHIVE_CREATE "<CMAKE_AR> Scr <TARGET> <LINK_FLAGS> <OBJECTS>")
set(CMAKE_CXX_ARCHIVE_CREATE "<CMAKE_AR> Scr <TARGET> <LINK_FLAGS> <OBJECTS>")
set(CMAKE_C_ARCHIVE_FINISH "<CMAKE_RANLIB> -no_warning_for_no_symbols -c <TARGET>")
set(CMAKE_CXX_ARCHIVE_FINISH "<CMAKE_RANLIB> -no_warning_for_no_symbols -c <TARGET>")
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#-----------------------------------------------------------------------------
# Common.
bugfix [#23257] cmake tests for SSE, but SSE2 gets enabled patch from Vinay Pawar, some minor changes by me.
2010-08-11 10:23:48 +02:00
Fix #33411: crash baking smoke with FFT high resolution. CMake had FFTW disabled by default, and when FFTW was not enabled it lead to uninitialized memory usage. Now it falls back to wavelet if there is no FFTW, and I've enabled it by default in CMake. If it's not found on Linux it will get disabled automatically.
2012-12-05 16:46:31 +01:00
if(NOT WITH_FFTW3 AND WITH_MOD_OCEANSIM)
message(FATAL_ERROR "WITH_MOD_OCEANSIM requires WITH_FFTW3 to be ON")
endif()
don't disable cycles when OIIO isnt found, instead throw an error, annoying when full build is done and later find cycles isn't on.
2012-07-01 17:26:25 +02:00
if(WITH_CYCLES)
if(NOT WITH_OPENIMAGEIO)
typos on error messages in CMake
2013-09-23 15:21:27 +02:00
message(FATAL_ERROR "Cycles requires WITH_OPENIMAGEIO, the library may not have been found. Configure OIIO or disable WITH_CYCLES")
don't disable cycles when OIIO isnt found, instead throw an error, annoying when full build is done and later find cycles isn't on.
2012-07-01 17:26:25 +02:00
endif()
if(NOT WITH_BOOST)
typos on error messages in CMake
2013-09-23 15:21:27 +02:00
message(FATAL_ERROR "Cycles requires WITH_BOOST, the library may not have been found. Configure BOOST or disable WITH_CYCLES")
don't disable cycles when OIIO isnt found, instead throw an error, annoying when full build is done and later find cycles isn't on.
2012-07-01 17:26:25 +02:00
endif()
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
Cycles OSL: windows build system changes to support static OSL/OIIO.
2012-11-15 18:16:27 +01:00
if(WITH_CYCLES_OSL)
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
if(NOT WITH_LLVM)
typos on error messages in CMake
2013-09-23 15:21:27 +02:00
message(FATAL_ERROR "Cycles OSL requires WITH_LLVM, the library may not have been found. Configure LLVM or disable WITH_CYCLES_OSL")
Better support for LLVM linking, needed for static OSL library. This adds cmake code for LLVM on linux and updates the cmake code used for OSX. LLVM is linked like other external libraries now, by using the setup_liblinks and setup_libdirs macros instead of the PLATFORM_LINKFLAGS variable. The use of llvm-config for getting a list of libraries can also be simplified quite a bit. Caching the LLVM_DIRECTORY and LLVM_VERSION strings could be nicer though.
2012-10-06 13:00:45 +02:00
endif()
endif()
don't disable cycles when OIIO isnt found, instead throw an error, annoying when full build is done and later find cycles isn't on.
2012-07-01 17:26:25 +02:00
endif()
Replacing gettext i18n backend by boost::locale one. This commit adds a small and simplistic C wrapper around boost's locale library as intern/locale, and heavily simplifies/reduces Blender's own i18n code (under blenfont/ dir). And it adds back UI translation on windows' official builds (with msvc)! Note to platform maintainers: iconv and gettext (libintl) can now be removed from precompiled libs (not gettext binaries, under windows, of course ;) ). Note to MinGW32/64 users: boost_locale lib has not yet been uploaded for those build env, please disable WITH_INTERNATIONAL for now (hopefully will be fixed very soon, have contacted psy-fy).
2012-11-11 17:54:26 +01:00
if(WITH_INTERNATIONAL)
if(NOT WITH_BOOST)
typos on error messages in CMake
2013-09-23 15:21:27 +02:00
message(FATAL_ERROR "Internationalization requires WITH_BOOST, the library may not have been found. Configure BOOST or disable WITH_INTERNATIONAL")
Replacing gettext i18n backend by boost::locale one. This commit adds a small and simplistic C wrapper around boost's locale library as intern/locale, and heavily simplifies/reduces Blender's own i18n code (under blenfont/ dir). And it adds back UI translation on windows' official builds (with msvc)! Note to platform maintainers: iconv and gettext (libintl) can now be removed from precompiled libs (not gettext binaries, under windows, of course ;) ). Note to MinGW32/64 users: boost_locale lib has not yet been uploaded for those build env, please disable WITH_INTERNATIONAL for now (hopefully will be fixed very soon, have contacted psy-fy).
2012-11-11 17:54:26 +01:00
endif()
endif()
don't disable cycles when OIIO isnt found, instead throw an error, annoying when full build is done and later find cycles isn't on.
2012-07-01 17:26:25 +02:00
add sse flags for cmake/msvc
2011-08-01 08:11:41 +02:00
# See TEST_SSE_SUPPORT() for how this is defined.
Optimize linear<->sRGB conversion for SSE2 processors Using SSE2 intrinsics when available for this kind of conversions. It's not totally accurate, but accurate enough for the purposes where we're using direct colorspace conversion by-passing OCIO. Partially based on code from Cycles, partially based on other online articles: https://stackoverflow.com/questions/6475373/optimizations-for-pow-with-const-non-integer-exponent Makes projection painting on hi-res float textures smoother. This commit also enables global SSE2 in Blender. It shouldn't bring any regressions in supported hardware (we require SSE2 since 2.64 now), but should keep an eye on because compilers might have some bugs with that (unlikely, but possible).
2016-05-05 19:25:08 +02:00
# Do it globally, SSE2 is required for quite some time now.
# Doing it now allows to use SSE/SSE2 in inline headers.
if(SUPPORT_SSE_BUILD)
set(PLATFORM_CFLAGS " ${COMPILER_SSE_FLAG} ${PLATFORM_CFLAGS}")
add_definitions(-D__SSE__ -D__MMX__)
endif()
if(SUPPORT_SSE2_BUILD)
set(PLATFORM_CFLAGS " ${COMPILER_SSE2_FLAG} ${PLATFORM_CFLAGS}")
add_definitions(-D__SSE2__)
if(NOT SUPPORT_SSE_BUILD) # dont double up
add_definitions(-D__MMX__)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
endif()
cleanup endian handling - define __BIG_ENDIAN__ or __LITTLE_ENDIAN__ with cmake & scons. - ENDIAN_ORDER is now a define rather than a global short. - replace checks like this with single ifdef: #if defined(__sgi) || defined (__sparc) || defined (__sparc__) || defined (__PPC__) || defined (__ppc__) || defined (__hppa__) || defined (__BIG_ENDIAN__) - remove BKE_endian.h which isn't used
2011-09-19 10:02:17 +02:00
# set the endian define
Fix for endiantest, xcode condition interferred with other os
2012-08-07 14:03:43 +02:00
if(MSVC)
fix for building on windows, clear some warnings too
2011-09-27 03:32:27 +02:00
# for some reason this fails on msvc
cleanup endian handling - define __BIG_ENDIAN__ or __LITTLE_ENDIAN__ with cmake & scons. - ENDIAN_ORDER is now a define rather than a global short. - replace checks like this with single ifdef: #if defined(__sgi) || defined (__sparc) || defined (__sparc__) || defined (__PPC__) || defined (__ppc__) || defined (__hppa__) || defined (__BIG_ENDIAN__) - remove BKE_endian.h which isn't used
2011-09-19 10:02:17 +02:00
add_definitions(-D__LITTLE_ENDIAN__)
OSX/cmake: refactoring of setting endianess defines, this fixes compile of builds with endianess other than the buildmachine and avoids also failing configuration with xcode 4.4 due not supporting big_endian archs anymore
2012-08-07 15:51:19 +02:00
# OSX-Note: as we do crosscompiling with specific set architecture,
# endianess-detection and autosetting is counterproductive
# so we just set endianess according CMAKE_OSX_ARCHITECTURES
elseif(CMAKE_OSX_ARCHITECTURES MATCHES i386 OR CMAKE_OSX_ARCHITECTURES MATCHES x86_64)
add_definitions(-D__LITTLE_ENDIAN__)
elseif(CMAKE_OSX_ARCHITECTURES MATCHES ppc OR CMAKE_OSX_ARCHITECTURES MATCHES ppc64)
add_definitions(-D__BIG_ENDIAN__)
fix for building on windows, clear some warnings too
2011-09-27 03:32:27 +02:00
else()
include(TestBigEndian)
test_big_endian(_SYSTEM_BIG_ENDIAN)
if(_SYSTEM_BIG_ENDIAN)
add_definitions(-D__BIG_ENDIAN__)
else()
add_definitions(-D__LITTLE_ENDIAN__)
endif()
unset(_SYSTEM_BIG_ENDIAN)
cleanup endian handling - define __BIG_ENDIAN__ or __LITTLE_ENDIAN__ with cmake & scons. - ENDIAN_ORDER is now a define rather than a global short. - replace checks like this with single ifdef: #if defined(__sgi) || defined (__sparc) || defined (__sparc__) || defined (__PPC__) || defined (__ppc__) || defined (__hppa__) || defined (__BIG_ENDIAN__) - remove BKE_endian.h which isn't used
2011-09-19 10:02:17 +02:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_IMAGE_OPENJPEG)
add cmake option WITH_SYSTEM_OPENJPEG so linux can build cycles without having libopenjpeg installed.
2012-06-23 16:23:44 +02:00
if(WITH_SYSTEM_OPENJPEG)
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
# dealt with above
CMake: Don't modify global CFlags when enabling/disabling OpenJpeg
2015-09-16 16:08:26 +02:00
set(OPENJPEG_DEFINES "")
patch from IRIE Shinsuke, use systems openjpeg on *nix.
2011-02-15 20:04:51 +01:00
else()
cmake: added FindOpenJPEG module.
2011-06-19 09:46:24 +02:00
set(OPENJPEG_INCLUDE_DIRS "${CMAKE_SOURCE_DIR}/extern/libopenjpeg")
CMake: Don't modify global CFlags when enabling/disabling OpenJpeg
2015-09-16 16:08:26 +02:00
set(OPENJPEG_DEFINES "-DOPJ_STATIC")
patch from IRIE Shinsuke, use systems openjpeg on *nix.
2011-02-15 20:04:51 +01:00
endif()
CMake: Attempt to fix compilation error on Windows after recent changes
2015-09-17 11:17:00 +02:00
# Special handling of Windows platform where openjpeg is always static.
if(WIN32)
set(OPENJPEG_DEFINES "-DOPJ_STATIC")
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
CMake: unbundle eigen3 Optionally use systems eigen3 library. T41989 by @hasufell with edits
2015-03-19 05:41:41 +01:00
if(NOT WITH_SYSTEM_EIGEN3)
set(EIGEN3_INCLUDE_DIRS ${CMAKE_SOURCE_DIR}/extern/Eigen3)
endif()
WebPlugin fix: * web plugin works on opera too sandboxing: * added AppArmor configuration * enabled privilege separation for the web plugin: the blender player can run as a lower privileged user, xauth token is generated on the fly . testing: * web plugin tested on ubuntu 32/64bit, fedora and FreeBSD Changed only cmake build script: AppArmor is enabled by default, if you want to enable privilege separation instead, you have to change the cmake variable WEBPLUGIN_SANDBOX_MODE to privsep (or none to disable it). Warning: source/gameengine/GamePlayer/xembed/blenderplayer-wrapper.c must be setuid root in order to change user successfully
2008-10-07 19:13:35 +02:00
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#-----------------------------------------------------------------------------
# Configure OpenGL.
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
find_package(OpenGL)
cmake: remove python include in the wm module, set opengl as a system include.
2011-06-08 07:39:58 +02:00
blender_include_dirs_sys("${OPENGL_INCLUDE_DIR}")
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
if(WITH_GLU)
list(APPEND BLENDER_GL_LIBRARIES "${OPENGL_glu_LIBRARY}")
list(APPEND GL_DEFINITIONS -DWITH_GLU)
endif()
if(WITH_SYSTEM_GLES)
find_package_wrapper(OpenGLES)
endif()
if(WITH_GL_PROFILE_COMPAT OR WITH_GL_PROFILE_CORE)
list(APPEND BLENDER_GL_LIBRARIES "${OPENGL_gl_LIBRARY}")
elseif(WITH_GL_PROFILE_ES20)
if(WITH_SYSTEM_GLES)
if(NOT OPENGLES_LIBRARY)
message(FATAL_ERROR "Unable to find OpenGL ES libraries. Install them or disable WITH_SYSTEM_GLES.")
endif()
list(APPEND BLENDER_GL_LIBRARIES OPENGLES_LIBRARY)
else()
set(OPENGLES_LIBRARY "" CACHE FILEPATH "OpenGL ES 2.0 library file")
mark_as_advanced(OPENGLES_LIBRARY)
list(APPEND BLENDER_GL_LIBRARIES "${OPENGLES_LIBRARY}")
Cleanup: cmake
2014-11-13 15:03:30 +01:00
if(NOT OPENGLES_LIBRARY)
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
message(FATAL_ERROR "To compile WITH_GL_EGL you need to set OPENGLES_LIBRARY to the file path of an OpenGL ES 2.0 library.")
endif()
endif()
if(WIN32)
# Setup paths to files needed to install and redistribute Windows Blender with OpenGL ES
set(OPENGLES_DLL "" CACHE FILEPATH "OpenGL ES 2.0 redistributable DLL file")
mark_as_advanced(OPENGLES_DLL)
if(NOT OPENGLES_DLL)
message(FATAL_ERROR "To compile WITH_GL_PROFILE_ES20 you need to set OPENGLES_DLL to the file path of an OpenGL ES 2.0 runtime dynamic link library (DLL).")
endif()
if(WITH_GL_ANGLE)
list(APPEND GL_DEFINITIONS -DWITH_ANGLE)
set(D3DCOMPILER_DLL "" CACHE FILEPATH "Direct3D Compiler redistributable DLL file (needed by ANGLE)")
get_filename_component(D3DCOMPILER_FILENAME "${D3DCOMPILER_DLL}" NAME)
list(APPEND GL_DEFINITIONS "-DD3DCOMPILER=\"\\\"${D3DCOMPILER_FILENAME}\\\"\"")
mark_as_advanced(D3DCOMPILER_DLL)
Cleanup: cmake
2014-11-13 15:03:30 +01:00
if(D3DCOMPILER_DLL STREQUAL "")
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
message(FATAL_ERROR "To compile WITH_GL_ANGLE you need to set D3DCOMPILER_DLL to the file path of a copy of the DirectX redistributable DLL file: D3DCompiler_46.dll")
endif()
endif()
endif()
endif()
if(WITH_GL_EGL)
list(APPEND GL_DEFINITIONS -DWITH_GL_EGL)
if(WITH_SYSTEM_GLES)
if(NOT OPENGLES_EGL_LIBRARY)
message(FATAL_ERROR "Unable to find OpenGL ES libraries. Install them or disable WITH_SYSTEM_GLES.")
endif()
list(APPEND BLENDER_GL_LIBRARIES OPENGLES_EGL_LIBRARY)
else()
set(OPENGLES_EGL_LIBRARY "" CACHE FILEPATH "EGL library file")
mark_as_advanced(OPENGLES_EGL_LIBRARY)
list(APPEND BLENDER_GL_LIBRARIES "${OPENGLES_LIBRARY}" "${OPENGLES_EGL_LIBRARY}")
Cleanup: cmake
2014-11-13 15:03:30 +01:00
if(NOT OPENGLES_EGL_LIBRARY)
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
message(FATAL_ERROR "To compile WITH_GL_EGL you need to set OPENGLES_EGL_LIBRARY to the file path of an EGL library.")
endif()
endif()
if(WIN32)
# Setup paths to files needed to install and redistribute Windows Blender with OpenGL ES
set(OPENGLES_EGL_DLL "" CACHE FILEPATH "EGL redistributable DLL file")
mark_as_advanced(OPENGLES_EGL_DLL)
if(NOT OPENGLES_EGL_DLL)
message(FATAL_ERROR "To compile WITH_GL_EGL you need to set OPENGLES_EGL_DLL to the file path of an EGL runtime dynamic link library (DLL).")
endif()
endif()
endif()
if(WITH_GL_PROFILE_COMPAT)
list(APPEND GL_DEFINITIONS -DWITH_GL_PROFILE_COMPAT)
endif()
if(WITH_GL_PROFILE_CORE)
list(APPEND GL_DEFINITIONS -DWITH_GL_PROFILE_CORE)
endif()
if(WITH_GL_PROFILE_ES20)
list(APPEND GL_DEFINITIONS -DWITH_GL_PROFILE_ES20)
endif()
if(WITH_GL_EGL)
list(APPEND GL_DEFINITIONS -DWITH_EGL)
endif()
Merge from trunk -r 22040:23000.
2009-10-19 18:20:12 +02:00
use CMake's OpenMP built in detection rather then defining flags ourselves.
2010-11-19 12:33:12 +01:00
#-----------------------------------------------------------------------------
# Configure OpenMP.
OSX/cmake: more work on T40887 and a tentative fix - test fail due libiomp5 is not available @ testing time - must solve this by adding requred flags/includes to tests - atm release builds are possible with this hack
2014-07-08 00:29:53 +02:00
if(WITH_OPENMP)
formatting edits only
2011-09-30 17:51:58 +02:00
find_package(OpenMP)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(OPENMP_FOUND)
Buildbot: Initial work to move linux build environment to CMake This is so called "seems to work in dry tests" commit which is aimed to switch linux release environment to CMake. Some notes: - There's no special handle of libstdc++, but it wasn't really static for quite some time in SCons configuration and nobody really complained. - It was quite tricky to get OpenMP linked statically with just using some configuration so we went ahead and added a special option to CMake now which is only exist on Linux and advertised as shouldn't be used. - Packing is happening manually in slave_pack.py. This is because we have to add some really special files to the archive (mesa libraries for example) which we can't really handle from CMake/CPack in a nice generic way. Don't think it's bad approach, at least crappynness is localized and it's not _that_ crappy anyway. - Windows buildbot should keep working, but needs doublechecing. It's just a build folder changed, but you never know what it might imply. - Some further tweaks are likely needed to ensure all builders are working. Thanks Campbell for assistance in this patch!
2015-12-02 14:09:06 +01:00
if(NOT WITH_OPENMP_STATIC)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${OpenMP_C_FLAGS}")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${OpenMP_CXX_FLAGS}")
else()
# Typically avoid adding flags as defines but we can't
CMake: Fix typo in comment
2016-01-05 15:41:08 +01:00
# pass OpenMP flags to the linker for static builds, meaning
Buildbot: Initial work to move linux build environment to CMake This is so called "seems to work in dry tests" commit which is aimed to switch linux release environment to CMake. Some notes: - There's no special handle of libstdc++, but it wasn't really static for quite some time in SCons configuration and nobody really complained. - It was quite tricky to get OpenMP linked statically with just using some configuration so we went ahead and added a special option to CMake now which is only exist on Linux and advertised as shouldn't be used. - Packing is happening manually in slave_pack.py. This is because we have to add some really special files to the archive (mesa libraries for example) which we can't really handle from CMake/CPack in a nice generic way. Don't think it's bad approach, at least crappynness is localized and it's not _that_ crappy anyway. - Windows buildbot should keep working, but needs doublechecing. It's just a build folder changed, but you never know what it might imply. - Some further tweaks are likely needed to ensure all builders are working. Thanks Campbell for assistance in this patch!
2015-12-02 14:09:06 +01:00
# we can't add any OpenMP related flags to CFLAGS variables
# since they're passed to the linker as well.
add_definitions("${OpenMP_C_FLAGS}")
CMake: Use implicit compiler library paths to find OpenMP library Was lost since the original patch sent to Cambo, didn't notice the failure before because had it applied locally. Without this flag certain configuration wouldn't fins libgomp.
2015-12-03 11:34:41 +01:00
find_library_static(OpenMP_LIBRARIES gomp ${CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES})
Buildbot: Initial work to move linux build environment to CMake This is so called "seems to work in dry tests" commit which is aimed to switch linux release environment to CMake. Some notes: - There's no special handle of libstdc++, but it wasn't really static for quite some time in SCons configuration and nobody really complained. - It was quite tricky to get OpenMP linked statically with just using some configuration so we went ahead and added a special option to CMake now which is only exist on Linux and advertised as shouldn't be used. - Packing is happening manually in slave_pack.py. This is because we have to add some really special files to the archive (mesa libraries for example) which we can't really handle from CMake/CPack in a nice generic way. Don't think it's bad approach, at least crappynness is localized and it's not _that_ crappy anyway. - Windows buildbot should keep working, but needs doublechecing. It's just a build folder changed, but you never know what it might imply. - Some further tweaks are likely needed to ensure all builders are working. Thanks Campbell for assistance in this patch!
2015-12-02 14:09:06 +01:00
endif()
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
else()
set(WITH_OPENMP OFF)
endif()
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 04:32:51 +01:00
formatting edits only
2011-09-30 17:51:58 +02:00
mark_as_advanced(
OpenMP_C_FLAGS
OpenMP_CXX_FLAGS
)
endif()
use CMake's OpenMP built in detection rather then defining flags ourselves.
2010-11-19 12:33:12 +01:00
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-06 01:31:01 +02:00
#-----------------------------------------------------------------------------
# Configure GLEW
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
if(WITH_GLEW_MX)
list(APPEND GL_DEFINITIONS -DWITH_GLEW_MX)
endif()
rename WITH_BUILTIN_GLEW, WITH_SYSTEM_GLEW & negate.
2012-06-23 15:42:14 +02:00
if(WITH_SYSTEM_GLEW)
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-06 01:31:01 +02:00
find_package(GLEW)
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
# Note: There is an assumption here that the system GLEW is not a static library.
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-06 01:31:01 +02:00
if(NOT GLEW_FOUND)
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
message(FATAL_ERROR "GLEW is required to build Blender. Install it or disable WITH_SYSTEM_GLEW.")
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-06 01:31:01 +02:00
endif()
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
if(WITH_GLEW_MX)
set(BLENDER_GLEW_LIBRARIES ${GLEW_MX_LIBRARY})
else()
set(BLENDER_GLEW_LIBRARIES ${GLEW_LIBRARY})
endif()
rename WITH_BUILTIN_GLEW, WITH_SYSTEM_GLEW & negate.
2012-06-23 15:42:14 +02:00
else()
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
if(WITH_GLEW_ES)
set(GLEW_INCLUDE_PATH "${CMAKE_SOURCE_DIR}/extern/glew-es/include")
list(APPEND GL_DEFINITIONS -DGLEW_STATIC -DWITH_GLEW_ES)
# These definitions remove APIs from glew.h, making GLEW smaller, and catching unguarded API usage
if(NOT WITH_GL_PROFILE_ES20)
# No ES functions are needed
list(APPEND GL_DEFINITIONS -DGLEW_NO_ES)
elseif(NOT (WITH_GL_PROFILE_CORE OR WITH_GL_PROFILE_COMPAT))
# ES is enabled, but the other functions are all disabled
list(APPEND GL_DEFINITIONS -DGLEW_ES_ONLY)
endif()
if(WITH_GL_PROFILE_ES20)
if(WITH_GL_EGL)
list(APPEND GL_DEFINITIONS -DGLEW_USE_LIB_ES20)
endif()
# ToDo: This is an experiment to eliminate ES 1 symbols,
# GLEW doesn't really properly provide this level of control
# (for example, without modification it eliminates too many symbols)
# so there are lots of modifications to GLEW to make this work,
# and no attempt to make it work beyond Blender at this point.
list(APPEND GL_DEFINITIONS -DGL_ES_VERSION_1_0=0 -DGL_ES_VERSION_CL_1_1=0 -DGL_ES_VERSION_CM_1_1=0)
endif()
if(WITH_GL_EGL)
list(APPEND GL_DEFINITIONS -DGLEW_INC_EGL)
endif()
set(BLENDER_GLEW_LIBRARIES extern_glew_es bf_intern_glew_mx)
else()
set(GLEW_INCLUDE_PATH "${CMAKE_SOURCE_DIR}/extern/glew/include")
list(APPEND GL_DEFINITIONS -DGLEW_STATIC)
# This won't affect the non-experimental glew library,
# but is used for conditional compilation elsewhere.
list(APPEND GL_DEFINITIONS -DGLEW_NO_ES)
set(BLENDER_GLEW_LIBRARIES extern_glew)
endif()
add option WITH_BUILTIN_GLEW, so linux packagers can disable to use their own glew library.
2011-04-06 01:31:01 +02:00
endif()
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
if(NOT WITH_GLU)
list(APPEND GL_DEFINITIONS -DGLEW_NO_GLU)
endif()
add option WITH_SYSTEM_BULLET to link against the bullet installation found on the system. Note: this doesn't work yet for everything with latest stable bullet (2.81), need to look into why and likely apply some patches upstream. However I managed to link blender by disabling some features, likely it can be made to work without too much trouble.
2013-01-03 01:23:52 +01:00
#-----------------------------------------------------------------------------
# Configure Bullet
if(WITH_BULLET AND WITH_SYSTEM_BULLET)
find_package(Bullet)
if(NOT BULLET_FOUND)
set(WITH_BULLET OFF)
endif()
else()
set(BULLET_INCLUDE_DIRS "${CMAKE_SOURCE_DIR}/extern/bullet2/src")
# set(BULLET_LIBRARIES "")
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#-----------------------------------------------------------------------------
support for blender as a module on win32.
2011-03-24 01:14:49 +01:00
# Configure Python.
if(WITH_PYTHON_MODULE)
add_definitions(-DPy_ENABLE_SHARED)
formatting edits only
2011-09-30 17:51:58 +02:00
endif()
support for blender as a module on win32.
2011-03-24 01:14:49 +01:00
Move GLog/GFlags to extern/ This is where the libraries belongs to actually, they are not only used by Libmv now, but also by tests and Cycles.
2016-01-04 12:47:36 +01:00
#-----------------------------------------------------------------------------
# Configure GLog/GFlags
if(WITH_LIBMV OR WITH_GTESTS OR (WITH_CYCLES AND WITH_CYCLES_LOGGING))
set(GLOG_DEFINES
-DGOOGLE_GLOG_DLL_DECL=
)
set(GFLAGS_DEFINES
-DGFLAGS_DLL_DEFINE_FLAG=
-DGFLAGS_DLL_DECLARE_FLAG=
-DGFLAGS_DLL_DECL=
)
endif()
Move Ceres to extern/ Even tho it's currently only used by Libmv we might use it for something else in the future. Plus, it's actually where it logically belongs to.
2016-01-04 14:11:12 +01:00
#-----------------------------------------------------------------------------
# Configure Ceres
if(WITH_LIBMV)
set(CERES_DEFINES)
if(SHARED_PTR_FOUND)
if(SHARED_PTR_TR1_MEMORY_HEADER)
list(APPEND CERES_DEFINES -DCERES_TR1_MEMORY_HEADER)
endif()
if(SHARED_PTR_TR1_NAMESPACE)
list(APPEND CERES_DEFINES -DCERES_TR1_SHARED_PTR)
endif()
else()
message(FATAL_ERROR "Ceres: Unable to find shared_ptr.")
endif()
if(HAVE_STD_UNORDERED_MAP_HEADER)
if(HAVE_UNORDERED_MAP_IN_STD_NAMESPACE)
list(APPEND CERES_DEFINES -DCERES_STD_UNORDERED_MAP)
else()
if(HAVE_UNORDERED_MAP_IN_TR1_NAMESPACE)
list(APPEND CERES_DEFINES -DCERES_STD_UNORDERED_MAP_IN_TR1_NAMESPACE)
else()
list(APPEND CERES_DEFINES -DCERES_NO_UNORDERED_MAP)
message(STATUS "Ceres: Replacing unordered_map/set with map/set (warning: slower!)")
endif()
endif()
else()
if(HAVE_UNORDERED_MAP_IN_TR1_NAMESPACE)
list(APPEND CERES_DEFINES -DCERES_TR1_UNORDERED_MAP)
else()
list(APPEND CERES_DEFINES -DCERES_NO_UNORDERED_MAP)
message(STATUS "Ceres: Replacing unordered_map/set with map/set (warning: slower!)")
endif()
endif()
endif()
support for blender as a module on win32.
2011-03-24 01:14:49 +01:00
#-----------------------------------------------------------------------------
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
# Extra compile flags
define NDEBUG for release builds so assert() is disabled.
2010-10-18 14:35:40 +02:00
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(CMAKE_COMPILER_IS_GNUCC)
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 10:55:35 +01:00
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 04:32:51 +01:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ALL -Wall)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_CAST_ALIGN -Wcast-align)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ERROR_IMPLICIT_FUNCTION_DECLARATION -Werror=implicit-function-declaration)
quiet -Wmissing-prototypes warnings, and enable this warning by default for C with gcc. helps for finding unused functions and making functions static, also did some minor code cleanup.
2012-09-15 03:52:28 +02:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ERROR_RETURN_TYPE -Werror=return-type)
C99 is now the C standard for all our C code. The main new feature is mixed variable declarations and code, which can help reduce uninitialized variables or accidental variable reuse. Due to incomplete C99 support in VS 2013, variable length arrays are not supported, BLI_array_alloca must still be used. The header <tgmath.h> is also not supported. Differential Revision: https://developer.blender.org/D1631
2015-11-22 17:12:54 +01:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ERROR_VLA -Werror=vla)
CMake, GCC: replace -Werror=strict-prototypes with -Wstrict-prototypes, some external headers cause this.
2011-03-15 23:30:07 +01:00
# system headers sometimes do this, disable for now, was: -Werror=strict-prototypes
quiet -Wmissing-prototypes warnings, and enable this warning by default for C with gcc. helps for finding unused functions and making functions static, also did some minor code cleanup.
2012-09-15 03:52:28 +02:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_STRICT_PROTOTYPES -Wstrict-prototypes)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_MISSING_PROTOTYPES -Wmissing-prototypes)
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 04:32:51 +01:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_CHAR_SUBSCRIPTS -Wno-char-subscripts)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_UNKNOWN_PRAGMAS -Wno-unknown-pragmas)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_POINTER_ARITH -Wpointer-arith)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_UNUSED_PARAMETER -Wunused-parameter)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_WRITE_STRINGS -Wwrite-strings)
fix for error in recent commit (made function static that shouldn't have been), add extra gcc warnings to cmake.
2012-09-16 03:35:00 +02:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_LOGICAL_OP -Wlogical-op)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_UNDEF -Wundef)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_INIT_SELF -Winit-self) # needs -Wuninitialized
code cleanup: remove unused macros, commet some which may be useful later - or good to keep for completeness. quieted some warnings and add flags -Wmissing-include-dirs and -Wno-div-by-zero to cmake/gcc
2012-09-20 03:02:39 +02:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_NULL -Wnonnull) # C only
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_MISSING_INCLUDE_DIRS -Wmissing-include-dirs)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_DIV_BY_ZERO -Wno-div-by-zero)
enable type limits warning when compiling with gcc.
2013-07-19 12:39:25 +02:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_TYPE_LIMITS -Wtype-limits)
CMake: add -Wformat-signedness
2015-04-24 11:11:02 +02:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_FORMAT_SIGN -Wformat-signedness)
comment -Wundef for cmake default flags, this causes too many warnings with mingw.
2011-09-26 11:43:35 +02:00
dont ise -Wuninitialized on gcc 4.2 and older, it gives annoying warnings.
2012-10-20 15:29:07 +02:00
# gcc 4.2 gives annoying warnings on every file with this
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
if(NOT "${CMAKE_C_COMPILER_VERSION}" VERSION_LESS "4.3")
dont ise -Wuninitialized on gcc 4.2 and older, it gives annoying warnings.
2012-10-20 15:29:07 +02:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_UNINITIALIZED -Wuninitialized)
endif()
disable -Wredundant-decls for gcc versions older then 4.6
2013-03-14 14:00:00 +01:00
# versions before gcc4.6 give many BLI_math warnings
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
if(NOT "${CMAKE_C_COMPILER_VERSION}" VERSION_LESS "4.6")
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_REDUNDANT_DECLS -Wredundant-decls)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_REDUNDANT_DECLS -Wredundant-decls)
disable -Wredundant-decls for gcc versions older then 4.6
2013-03-14 14:00:00 +01:00
endif()
CMake: use -Wshadow warning for C source C source now builds without shadowing, enable with GCC by default.
2015-11-23 05:45:52 +01:00
# versions before gcc4.8 include global name-space.
if(NOT "${CMAKE_C_COMPILER_VERSION}" VERSION_LESS "4.8")
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_SHADOW -Wshadow)
endif()
quiet various warnings, also disable -Wdouble-promotion with cmake since it gives warnings with variable length args.
2011-04-03 12:04:16 +02:00
# disable because it gives warnings for printf() & friends.
# ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_DOUBLE_PROMOTION -Wdouble-promotion -Wno-error=double-promotion)
OSX: fix compile by conditional unsupported flags
2012-01-01 17:46:08 +01:00
if(NOT APPLE)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_ERROR_UNUSED_BUT_SET_VARIABLE -Wno-error=unused-but-set-variable)
endif()
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 04:32:51 +01:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_ALL -Wall)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_INVALID_OFFSETOF -Wno-invalid-offsetof)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_SIGN_COMPARE -Wno-sign-compare)
fix for error in recent commit (made function static that shouldn't have been), add extra gcc warnings to cmake.
2012-09-16 03:35:00 +02:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_LOGICAL_OP -Wlogical-op)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_INIT_SELF -Winit-self) # needs -Wuninitialized
code cleanup: remove unused macros, commet some which may be useful later - or good to keep for completeness. quieted some warnings and add flags -Wmissing-include-dirs and -Wno-div-by-zero to cmake/gcc
2012-09-20 03:02:39 +02:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_MISSING_INCLUDE_DIRS -Wmissing-include-dirs)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_DIV_BY_ZERO -Wno-div-by-zero)
enable type limits warning when compiling with gcc.
2013-07-19 12:39:25 +02:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_TYPE_LIMITS -Wtype-limits)
CMake: Enable strict flags for C++
2015-03-27 11:55:58 +01:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_ERROR_RETURN_TYPE -Werror=return-type)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_ERROR_IMPLICIT_FUNCTION_DECLARATION -Werror=implicit-function-declaration)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_CHAR_SUBSCRIPTS -Wno-char-subscripts)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_UNKNOWN_PRAGMAS -Wno-unknown-pragmas)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_POINTER_ARITH -Wpointer-arith)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_UNUSED_PARAMETER -Wunused-parameter)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_WRITE_STRINGS -Wwrite-strings)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_UNDEF -Wundef)
CMake: add -Wformat-signedness
2015-04-24 11:11:02 +02:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_FORMAT_SIGN -Wformat-signedness)
CMake: disable some warnings on mac that cause prints in nearly every file, and remove duplicate -Wundef entries.
2012-10-01 18:45:50 +02:00
dont ise -Wuninitialized on gcc 4.2 and older, it gives annoying warnings.
2012-10-20 15:29:07 +02:00
# gcc 4.2 gives annoying warnings on every file with this
Merged changes in the trunk up to revision 55546. Conflicts resolved: source/blenderplayer/bad_level_call_stubs/SConscript Partly reverted changes to intern/cycles/blender/addon/ui.py in revision 52899 to make it easier to merge trunk changes.
2013-03-24 13:13:13 +01:00
if(NOT "${CMAKE_C_COMPILER_VERSION}" VERSION_LESS "4.3")
dont ise -Wuninitialized on gcc 4.2 and older, it gives annoying warnings.
2012-10-20 15:29:07 +02:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_UNINITIALIZED -Wuninitialized)
endif()
CMake: disable some warnings on mac that cause prints in nearly every file, and remove duplicate -Wundef entries.
2012-10-01 18:45:50 +02:00
# causes too many warnings
if(NOT APPLE)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_UNDEF -Wundef)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_MISSING_DECLARATIONS -Wmissing-declarations)
endif()
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 10:55:35 +01:00
correct flags for older GCC's which dont suppport -Wno-deprecated-declarations, detect if the flag is supported before use
2011-10-30 05:48:00 +01:00
# flags to undo strict flags
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_DEPRECATED_DECLARATIONS -Wno-deprecated-declarations)
hopefully fix problem with cmake on osx (older gcc version)
2011-11-01 01:34:09 +01:00
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_UNUSED_PARAMETER -Wno-unused-parameter)
OSX: fix compile by conditional unsupported flags
2012-01-01 17:46:08 +01:00
if(NOT APPLE)
left out one tiny word...
2012-01-01 23:23:08 +01:00
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_ERROR_UNUSED_BUT_SET_VARIABLE -Wno-error=unused-but-set-variable)
OSX: fix compile by conditional unsupported flags
2012-01-01 17:46:08 +01:00
endif()
correct flags for older GCC's which dont suppport -Wno-deprecated-declarations, detect if the flag is supported before use
2011-10-30 05:48:00 +01:00
CMake: check CMAKE_C_COMPILER_ID instead of CMAKE_CXX_COMPILER_ID While its possible to have different C/C++ compilers, we dont support this at the moment, so just check C compiler ID for now.
2013-12-02 01:36:33 +01:00
elseif(CMAKE_C_COMPILER_ID MATCHES "Clang")
minor fixes - new compositor could use uninitialized var - profile conversion could use uninitialized var - set better warnings for clang+cmake. - remove picky warnings from sphinx doc gen shell script.
2012-06-11 14:13:41 +02:00
OSX/CMAKE: Way better fix for T40887, checks where failing with clang-omp - found a way to feed just extra flags to the testcompiles
2014-07-08 23:35:04 +02:00
if(APPLE AND WITH_OPENMP) # we need the Intel omp lib linked here to not fail all tests due presence of -fopenmp !
set(CMAKE_REQUIRED_FLAGS "-L${LIBDIR}/openmp/lib -liomp5") # these are only used for the checks
endif()
quiet -Wmissing-prototypes warnings, and enable this warning by default for C with gcc. helps for finding unused functions and making functions static, also did some minor code cleanup.
2012-09-15 03:52:28 +02:00
# strange, clang complains these are not supported, but then yses them.
minor fixes - new compositor could use uninitialized var - profile conversion could use uninitialized var - set better warnings for clang+cmake. - remove picky warnings from sphinx doc gen shell script.
2012-06-11 14:13:41 +02:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ALL -Wall)
Fix various warnings with clang build, and adjust cmake clang warnings flags to include a few more that gcc is using too.
2013-02-26 22:58:06 +01:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ERROR_IMPLICIT_FUNCTION_DECLARATION -Werror=implicit-function-declaration)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ERROR_RETURN_TYPE -Werror=return-type)
minor fixes - new compositor could use uninitialized var - profile conversion could use uninitialized var - set better warnings for clang+cmake. - remove picky warnings from sphinx doc gen shell script.
2012-06-11 14:13:41 +02:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_AUTOLOGICAL_COMPARE -Wno-tautological-compare)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_UNKNOWN_PRAGMAS -Wno-unknown-pragmas)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_CHAR_SUBSCRIPTS -Wno-char-subscripts)
quiet -Wmissing-prototypes warnings, and enable this warning by default for C with gcc. helps for finding unused functions and making functions static, also did some minor code cleanup.
2012-09-15 03:52:28 +02:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_STRICT_PROTOTYPES -Wstrict-prototypes)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_MISSING_PROTOTYPES -Wmissing-prototypes)
Fix various warnings with clang build, and adjust cmake clang warnings flags to include a few more that gcc is using too.
2013-02-26 22:58:06 +01:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_UNUSED_PARAMETER -Wunused-parameter)
minor fixes - new compositor could use uninitialized var - profile conversion could use uninitialized var - set better warnings for clang+cmake. - remove picky warnings from sphinx doc gen shell script.
2012-06-11 14:13:41 +02:00
add back -Wundef for g++, also correct clang warnings and add -Wunused-macros warning.
2012-09-20 11:19:49 +02:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_ALL -Wall)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_AUTOLOGICAL_COMPARE -Wno-tautological-compare)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_UNKNOWN_PRAGMAS -Wno-unknown-pragmas)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_CHAR_SUBSCRIPTS -Wno-char-subscripts)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_OVERLOADED_VIRTUAL -Wno-overloaded-virtual) # we get a lot of these, if its a problem a dev needs to look into it.
Fix various warnings with clang build, and adjust cmake clang warnings flags to include a few more that gcc is using too.
2013-02-26 22:58:06 +01:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_SIGN_COMPARE -Wno-sign-compare)
add back -Wundef for g++, also correct clang warnings and add -Wunused-macros warning.
2012-09-20 11:19:49 +02:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_INVALID_OFFSETOF -Wno-invalid-offsetof)
Fix various warnings with clang build, and adjust cmake clang warnings flags to include a few more that gcc is using too.
2013-02-26 22:58:06 +01:00
# gives too many unfixable warnings
# ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_UNUSED_MACROS -Wunused-macros)
# ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_UNUSED_MACROS -Wunused-macros)
minor fixes - new compositor could use uninitialized var - profile conversion could use uninitialized var - set better warnings for clang+cmake. - remove picky warnings from sphinx doc gen shell script.
2012-06-11 14:13:41 +02:00
tweaks to clang so blender can build with -Werror
2013-03-14 08:25:54 +01:00
# flags to undo strict flags
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_UNUSED_PARAMETER -Wno-unused-parameter)
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_UNUSED_MACROS -Wno-unused-macros)
clang/cmake - quiet warnings for external libs and reference moto as a system include.
2013-07-15 10:26:16 +02:00
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_MISSING_VARIABLE_DECLARATIONS -Wno-missing-variable-declarations)
Code Cleanup: warnings
2013-11-22 01:30:40 +01:00
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_INCOMPAT_PTR_DISCARD_QUAL -Wno-incompatible-pointer-types-discards-qualifiers)
clang/cmake - quiet warnings for external libs and reference moto as a system include.
2013-07-15 10:26:16 +02:00
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_UNUSED_FUNCTION -Wno-unused-function)
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_INT_TO_VOID_POINTER_CAST -Wno-int-to-void-pointer-cast)
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_MISSING_PROTOTYPES -Wno-missing-prototypes)
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_DUPLICATE_ENUM -Wno-duplicate-enum)
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_UNDEF -Wno-undef)
ADD_CHECK_C_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS C_WARN_NO_MISSING_NORETURN -Wno-missing-noreturn)
ADD_CHECK_CXX_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS CXX_WARN_NO_UNUSED_PRIVATE_FIELD -Wno-unused-private-field)
ADD_CHECK_CXX_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS CXX_WARN_NO_CXX11_NARROWING -Wno-c++11-narrowing)
ADD_CHECK_CXX_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS CXX_WARN_NO_NON_VIRTUAL_DTOR -Wno-non-virtual-dtor)
ADD_CHECK_CXX_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS CXX_WARN_NO_UNUSED_MACROS -Wno-unused-macros)
ADD_CHECK_CXX_COMPILER_FLAG(CC_REMOVE_STRICT_FLAGS CXX_WARN_NO_REORDER -Wno-reorder)
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 10:55:35 +01:00
elseif(CMAKE_C_COMPILER_ID MATCHES "Intel")
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 04:32:51 +01:00
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_ALL -Wall)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_POINTER_ARITH -Wpointer-arith)
ADD_CHECK_C_COMPILER_FLAG(C_WARNINGS C_WARN_NO_UNKNOWN_PRAGMAS -Wno-unknown-pragmas)
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 10:55:35 +01:00
fix for cmake flag detection, was not caching the resulting variable so the test ran each time. also cache SSE, SSE2 checks.
2010-12-21 04:32:51 +01:00
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_ALL -Wall)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_INVALID_OFFSETOF -Wno-invalid-offsetof)
ADD_CHECK_CXX_COMPILER_FLAG(CXX_WARNINGS CXX_WARN_NO_SIGN_COMPARE -Wno-sign-compare)
CMake now tests warnings are supported, GCC 4.0 wasn't working because of unsupported warnings. this can work for other compilers too, currently intel and gcc use this.
2010-12-16 10:55:35 +01:00
fix [#28786] Large enum lists display columns in inverted order (right to left) also cleared annoying intel c++ warnings.
2011-10-01 23:09:42 +02:00
# disable numbered, false positives
set(C_WARNINGS "${C_WARNINGS} -wd188,186,144,913,556")
set(CXX_WARNINGS "${CXX_WARNINGS} -wd188,186,144,913,556")
Cmake cleanup Move compiler warnings for msvc to common compilerwarnings.
2014-11-08 21:17:04 +01:00
elseif(CMAKE_C_COMPILER_ID MATCHES "MSVC")
# most msvc warnings are C & C++
set(_WARNINGS
# warning level:
"/W3"
"/w34062" # switch statement contains 'default' but no 'case' labels
# disable:
"/wd4018" # signed/unsigned mismatch
CMake: disable warning 4146 This is warning on noisy (false positives).
2015-12-21 04:54:36 +01:00
"/wd4146" # unary minus operator applied to unsigned type, result still unsigned
Cmake cleanup Move compiler warnings for msvc to common compilerwarnings.
2014-11-08 21:17:04 +01:00
"/wd4065" # switch statement contains 'default' but no 'case' labels
"/wd4127" # conditional expression is constant
"/wd4181" # qualifier applied to reference type; ignored
"/wd4200" # zero-sized array in struct/union
"/wd4244" # conversion from 'type1' to 'type2', possible loss of data
"/wd4267" # conversion from 'size_t' to 'type', possible loss of data
"/wd4305" # truncation from 'type1' to 'type2'
"/wd4800" # forcing value to bool 'true' or 'false'
# errors:
"/we4013" # 'function' undefined; assuming extern returning int
"/we4431" # missing type specifier - int assumed
)
fix [#28786] Large enum lists display columns in inverted order (right to left) also cleared annoying intel c++ warnings.
2011-10-01 23:09:42 +02:00
Cmake cleanup Move compiler warnings for msvc to common compilerwarnings.
2014-11-08 21:17:04 +01:00
string(REPLACE ";" " " _WARNINGS "${_WARNINGS}")
set(C_WARNINGS "${_WARNINGS}")
set(CXX_WARNINGS "${_WARNINGS}")
unset(_WARNINGS)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
- fixed remaining unused warnings. - omit render code from this warning (cmake only), until render branch is merged. - moved -Wunused-parameter warning to apply to all C code in blender (not just ./source/blender), (cmake only).
2010-10-17 08:38:56 +02:00
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 08:55:45 +02:00
# ensure python header is found since detection can fail, this could happen
# with _any_ library but since we used a fixed python version this tends to
# be most problematic.
if(WITH_PYTHON)
if(NOT EXISTS "${PYTHON_INCLUDE_DIR}/Python.h")
message(FATAL_ERROR "Missing: \"${PYTHON_INCLUDE_DIR}/Python.h\",\n"
"Set the cache entry 'PYTHON_INCLUDE_DIR' to point "
"to a valid python include path. Containing "
"Python.h for python version \"${PYTHON_VERSION}\"")
endif()
WITH_PYTHON_INSTALL_NUMPY option for unix/cmake, just copies from site-packages.
2012-04-30 11:38:32 +02:00
CMake: Silent Numpy warning on OSX It is in the archive actually and being installed nicely by the looks of it.
2016-02-01 10:39:16 +01:00
if(WIN32 OR APPLE)
Build system support for numpy on ms-windows
2014-03-04 14:20:11 +01:00
# pass, we have this in an archive to extract
elseif(WITH_PYTHON_INSTALL AND WITH_PYTHON_INSTALL_NUMPY)
Make requests python package to be detected in the same way as numpy This solves missing requests package reported on the systems where it's located in dist-packages rather than in site-packages. To do this there's now a helper macros which handles both requests and numpy now and could be used for more packages in the future. Reviewers: campbellbarton Reviewed By: campbellbarton Differential Revision: https://developer.blender.org/D686
2014-07-28 16:42:30 +02:00
find_python_package(numpy)
WITH_PYTHON_INSTALL_NUMPY option for unix/cmake, just copies from site-packages.
2012-04-30 11:38:32 +02:00
endif()
Build system: add cmake option to install requests
2014-03-04 19:39:53 +01:00
if(WIN32 OR APPLE)
# pass, we have this in lib/python/site-packages
elseif(WITH_PYTHON_INSTALL_REQUESTS)
Make requests python package to be detected in the same way as numpy This solves missing requests package reported on the systems where it's located in dist-packages rather than in site-packages. To do this there's now a helper macros which handles both requests and numpy now and could be used for more packages in the future. Reviewers: campbellbarton Reviewed By: campbellbarton Differential Revision: https://developer.blender.org/D686
2014-07-28 16:42:30 +02:00
find_python_package(requests)
Build system: add cmake option to install requests
2014-03-04 19:39:53 +01:00
endif()
print an error message if Python.h can't be found for cmake and scons since its such a common problem.
2011-07-16 08:55:45 +02:00
endif()
CMake: use CXX for C++ in var name Follow convention cmake uses.
2016-03-13 05:01:52 +01:00
if(WITH_CXX11)
Initial compilation support with C++11 featureset enabled This commit makes some preliminary fixes and tweaks aimed to make blender compilable with C++11 feature set. This includes: - Build system attribute to enable C++11 featureset. It's for sure default OFF, but easy to enable to have a play around with it and make sure all the stuff is compilable before we go C++11 for real. - Changes in Compositor to use non-named cl_int structure fields. This is because __STRICT_ANSI__ is defined by default by GCC and OpenCL does not use named fields in this case. - Changes to TYPE_CHECK() related on lack of typeof() in C++11 This uses decltype() instead with some trickery to make sure returned type is not a reference. - Changes for auto_ptr in Freestyle This actually conditionally switches between auto_ptr and unique_ptr since auto_ptr is deprecated in C++11. Seems to be not strictly needed but still nice to be ready for such an update anyway/ This all based on changes form depsgraph_refactor branch apart from the weird changes which were made in order to support MinGW compilation. Those parts of change would need to be carefully reviewed again after official move to gcc49 in MinGW. Tested on Linux with GCC-4.7 and Clang-3.5, other platforms are not tested and likely needs some more tweaks. Reviewers: campbellbarton, juicyfruit, mont29, lukastoenne, psy-fi, kjym3 Differential Revision: https://developer.blender.org/D1089
2015-02-09 18:23:21 +01:00
if(CMAKE_COMPILER_IS_GNUCC OR CMAKE_C_COMPILER_ID MATCHES "Clang")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
elseif(MSVC12)
# Nothing special is needed, C++11 features are available by default.
else()
message(FATAL_ERROR "Compiler ${CMAKE_C_COMPILER_ID} is not supported for C++11 build yet")
endif()
endif()
CMake: check GNU compiler before using extension Minor edit, don't assume non-msvc compilers are gcc/gnu compatible.
2015-11-22 22:31:29 +01:00
# Visual Studio has all standards it supports available by default
CMake: enable -std=gnu99 for clang and icc.
2015-11-23 18:22:53 +01:00
if(CMAKE_COMPILER_IS_GNUCC OR CMAKE_C_COMPILER_ID MATCHES "Clang" OR CMAKE_C_COMPILER_ID MATCHES "Intel")
C99 is now the C standard for all our C code. The main new feature is mixed variable declarations and code, which can help reduce uninitialized variables or accidental variable reuse. Due to incomplete C99 support in VS 2013, variable length arrays are not supported, BLI_array_alloca must still be used. The header <tgmath.h> is also not supported. Differential Revision: https://developer.blender.org/D1631
2015-11-22 17:12:54 +01:00
# Use C99 + GNU extensions, works with GCC, Clang, ICC
Experimental option to build Blender with C11 support It'll be nice to eventually go C11/C++11 by default, but for until then it's kinda handy to be able to build locally with C11 support, Reviewers: mont29, campbellbarton Reviewed By: mont29, campbellbarton Differential Revision: https://developer.blender.org/D1752
2016-01-29 17:43:40 +01:00
if(WITH_C11)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu11")
else()
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=gnu99")
endif()
C99 is now the C standard for all our C code. The main new feature is mixed variable declarations and code, which can help reduce uninitialized variables or accidental variable reuse. Due to incomplete C99 support in VS 2013, variable length arrays are not supported, BLI_array_alloca must still be used. The header <tgmath.h> is also not supported. Differential Revision: https://developer.blender.org/D1631
2015-11-22 17:12:54 +01:00
endif()
switch order cmake includes warning flags so its possible to disable them
2012-10-20 15:08:51 +02:00
# Include warnings first, so its possible to disable them with user defined flags
# eg: -Wno-uninitialized
set(CMAKE_C_FLAGS "${C_WARNINGS} ${CMAKE_C_FLAGS} ${PLATFORM_CFLAGS}")
set(CMAKE_CXX_FLAGS "${CXX_WARNINGS} ${CMAKE_CXX_FLAGS} ${PLATFORM_CFLAGS}")
Merge from trunk -r 22040:23000.
2009-10-19 18:20:12 +02:00
cmake: set python, llvm and osl libs as advanced.
2013-08-28 06:32:39 +02:00
# defined above, platform spesific but shared names
mark_as_advanced(
CYCLES_OSL
OSL_LIB_EXEC
OSL_COMPILER
OSL_LIB_COMP
OSL_LIB_QUERY
Cycles: Synchronize changes with standalone repository This changes were done in original commit of the standalone Cycles repository and needed here for easier patch synchronization.
2014-12-29 10:48:21 +01:00
OSL_INCLUDE_DIR
cmake: set python, llvm and osl libs as advanced.
2013-08-28 06:32:39 +02:00
)
mark_as_advanced(
LLVM_CONFIG
CMake: rename LLVM_DIRECTORY -> LLVM_ROOT_DIR Matching convention with all other libs
2015-03-05 05:36:22 +01:00
LLVM_ROOT_DIR
cmake: set python, llvm and osl libs as advanced.
2013-08-28 06:32:39 +02:00
LLVM_LIBRARY
LLVM_VERSION
)
Experimental option to build blender as a python module, rather then blender embedding python. CMake build option WITH_PYTHON_MODULE, will build ./bin/bpy.so This allows 'bpy' to be imported from python or other applications/IDE's which embed python, eg: python -c "import bpy ; bpy.ops.render.render(write_still=True)" This runs in background mode and has similar restrictions to running a script: blender --background --python test.py TODO: - install to site-packages with blender scripts - add support for imp.reload()
2011-02-21 00:39:29 +01:00
#-------------------------------------------------------------------------------
# Global Defines
fix for option WITH_CXX_GUARDEDALLOC with msvc
2011-05-24 08:44:39 +02:00
# better not set includes here but this debugging option is off by default.
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_CXX_GUARDEDALLOC)
fix for option WITH_CXX_GUARDEDALLOC with msvc
2011-05-24 08:44:39 +02:00
include_directories(${CMAKE_SOURCE_DIR}/intern/guardedalloc)
more guardedalloc use in C++, also make compositorMutex a static var, was allocated and never freed.
2012-06-25 12:35:24 +02:00
add_definitions(-DWITH_CXX_GUARDEDALLOC)
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
BKE_assert(), only prints the error unless cmake define WITH_ASSERT_ABORT is enabled and it will call abort(). made this option advanced so people don't enable along with other features.
2010-12-15 11:22:26 +01:00
if(WITH_ASSERT_ABORT)
add_definitions(-DWITH_ASSERT_ABORT)
endif()
last commit to fix warnings didnt set them at all, not it works as it should. also made cmakes output a lot quieter, messages can be uncommented for debugging or added back if other devs need this for some reason.
2010-12-16 13:48:30 +01:00
# message(STATUS "Using CFLAGS: ${CMAKE_C_FLAGS}")
# message(STATUS "Using CXXFLAGS: ${CMAKE_CXX_FLAGS}")
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#-----------------------------------------------------------------------------
# Libraries
CMake: use a global list to store libraries built rather then cmake_blender_libs.txt file.
2010-12-06 11:56:37 +01:00
Some WITH_TESTS weer not renamed to WITH_GTEST
2014-06-18 18:28:27 +02:00
if(WITH_GTESTS)
GTest unit testing framework Currently covers only small set of functionality.
2014-06-18 14:49:17 +02:00
include(GTestTesting)
endif()
Cycles: Add a cmake config to easily compile Cycles Standalone. On Linux/Mac OS X, simply type "make cycles" inside the Blender source directory, to get a standalone build of the engine. Reviewed by: Brecht Differential Revision: https://developer.blender.org/D228
2014-01-20 20:41:54 +01:00
if(WITH_BLENDER OR WITH_PLAYER)
add_subdirectory(intern)
add_subdirectory(extern)
GTest unit testing framework Currently covers only small set of functionality.
2014-06-18 14:49:17 +02:00
# source after intern and extern to gather all
# internal and external library information first, for test linking
add_subdirectory(source)
Cycles: Add a cmake config to easily compile Cycles Standalone. On Linux/Mac OS X, simply type "make cycles" inside the Blender source directory, to get a standalone build of the engine. Reviewed by: Brecht Differential Revision: https://developer.blender.org/D228
2014-01-20 20:41:54 +01:00
elseif(WITH_CYCLES_STANDALONE)
add_subdirectory(intern/cycles)
Fix Cycles Standalone compile.
2014-09-14 17:40:34 +02:00
add_subdirectory(extern/clew)
Cycles: Add option to directly link against CUDA libraries The main purpose of such linking is to make Blender compatible with NVidia's debuggers and profilers which are doing some LD_PRELOAD magic to intercept some function calls. Such magic conflicts with our CUDA wrangler magic and causes segmentation faults. The option is disabled by default, so there's no affect on any of artists. In order to make Blender linked directly against CUDA library use the WITH_CUDA_DYNLOAD CMake option (it's marked as advanced).
2016-01-14 08:24:09 +01:00
if(WITH_CUDA_DYNLOAD)
add_subdirectory(extern/cuew)
endif()
fix building cycles standalone on windows / cmake
2014-01-25 14:19:32 +01:00
if(NOT WITH_SYSTEM_GLEW)
Cycles: Add a cmake config to easily compile Cycles Standalone. On Linux/Mac OS X, simply type "make cycles" inside the Blender source directory, to get a standalone build of the engine. Reviewed by: Brecht Differential Revision: https://developer.blender.org/D228
2014-01-20 20:41:54 +01:00
add_subdirectory(extern/glew)
endif()
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#-----------------------------------------------------------------------------
# Blender Application
Advanced CMake option to build the player without blender: WITH_BLENDER
2011-07-13 10:15:06 +02:00
if(WITH_BLENDER)
add_subdirectory(source/creator)
endif()
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
Patch 17508: Blender Web Plugin - XEmbed. Enable XEmbed integration of blenderplayer, using -i as input parameter to pass embedder window id. create a minimal web plugin to embed blenderplayer on web pages (using gecko/mozilla as browser). Only for *nix.
2008-09-09 23:15:30 +02:00
CMake lists initial submission. Documentationand further verification for different platforms will follow soon. This was just tested against current CVS on MSVC 2005 with Verse, QuickTime, OpenEXR, Player all on.
2006-11-17 03:27:12 +01:00
#-----------------------------------------------------------------------------
# Blender Player
use lowercase for cmake builtin names and macros, remove contents in else() and endif() which is no longer needed.
2010-12-08 09:43:06 +01:00
if(WITH_PLAYER)
add_subdirectory(source/blenderplayer)
endif()
CPack packaging support from Dan Eicher, tested to build redhat RPM's, a Mac bundle also defined.
2011-02-15 19:33:05 +01:00
Move tests into tests/ top-level dir
2014-06-18 13:44:40 +02:00
#-----------------------------------------------------------------------------
# Testing
add_subdirectory(tests)
CPack packaging support from Dan Eicher, tested to build redhat RPM's, a Mac bundle also defined.
2011-02-15 19:33:05 +01:00
#-----------------------------------------------------------------------------
# CPack for generating packages
include(build_files/cmake/packaging.cmake)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
#-----------------------------------------------------------------------------
# Print Final Configuration
if(FIRST_RUN)
CMake: use functions instead of macros Reduces issues with vars leaking into the parent scope.
2015-06-17 01:16:17 +02:00
set(_config_msg "\nBlender Configuration\n=====================")
function(info_cfg_option
_setting
)
set(_msg " - ${_setting}")
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
string(LENGTH "${_msg}" _len)
WITH_PYTHON_INSTALL_NUMPY option for unix/cmake, just copies from site-packages.
2012-04-30 11:38:32 +02:00
while("32" GREATER "${_len}")
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
set(_msg "${_msg} ")
math(EXPR _len "${_len} + 1")
endwhile()
CMake: use functions instead of macros Reduces issues with vars leaking into the parent scope.
2015-06-17 01:16:17 +02:00
set(_config_msg "${_config_msg}\n${_msg}${${_setting}}" PARENT_SCOPE)
endfunction()
formatting edits only
2011-09-30 17:51:58 +02:00
CMake: use functions instead of macros Reduces issues with vars leaking into the parent scope.
2015-06-17 01:16:17 +02:00
function(info_cfg_text
_text
)
formatting edits only
2011-09-30 17:51:58 +02:00
CMake: use functions instead of macros Reduces issues with vars leaking into the parent scope.
2015-06-17 01:16:17 +02:00
set(_config_msg "${_config_msg}\n\n ${_text}" PARENT_SCOPE)
endfunction()
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
CMake: check CMAKE_C_COMPILER_ID instead of CMAKE_CXX_COMPILER_ID While its possible to have different C/C++ compilers, we dont support this at the moment, so just check C compiler ID for now.
2013-12-02 01:36:33 +01:00
message(STATUS "C Compiler: \"${CMAKE_C_COMPILER_ID}\"")
message(STATUS "C++ Compiler: \"${CMAKE_CXX_COMPILER_ID}\"")
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_text("Build Options:")
info_cfg_option(WITH_GAMEENGINE)
info_cfg_option(WITH_PLAYER)
info_cfg_option(WITH_BULLET)
option to build without the legacy compositor
2012-08-20 00:19:19 +02:00
info_cfg_option(WITH_IK_SOLVER)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_option(WITH_IK_ITASC)
info_cfg_option(WITH_OPENCOLLADA)
info_cfg_option(WITH_FFTW3)
info_cfg_option(WITH_INTERNATIONAL)
more cmake/x11 edits - added includes for spnav - added FindSpacenav.cmake which allows using spacenav from a nonstandard path. - remove NDOF_LIBPATH, use a full library path instead.
2011-08-02 08:32:53 +02:00
info_cfg_option(WITH_INPUT_NDOF)
Cycles: svn merge -r41613:41627 ^/trunk/blender
2011-11-07 18:13:32 +01:00
info_cfg_option(WITH_CYCLES)
fix for building on osx with recent freestyle bugfix.
2013-05-24 12:15:20 +02:00
info_cfg_option(WITH_FREESTYLE)
Color Management, Stage 1: Initial OpenColorIO library integration This commit integrates support of OpenColorIO library into build systems. It also contains C-API for OpenColorIO library which could be used by Blender. CMake has got find rules familiar to OpenImageIO's one which makes it easier for build system to find needed libraries and includes. Scons only could use explicitly defined paths to libraries and includes. C-API would be compiled and Blender would be linked against C-API and OpenColorIO but it wouldn't affect on Blender behavior at all. OpenColorIO could be disabled by setting up WITH_OCIO to Off in CMake and setting WITH_BF_OCIO in Scons.
2012-09-15 12:03:17 +02:00
info_cfg_option(WITH_OPENCOLORIO)
Implementation of OpenVDB as a possible cache format for smoke simulations. This commits implements OpenVDB as an extra cache format in the Point Cache system for smoke simulations. Compilation with the library is turned off by default for now, and shall be enabled when the library is present. A documentation of its doings is available here: http:// wiki.blender.org/index.php/User:Kevindietrich/OpenVDBSmokeExport. A guide to compile OpenVDB can be found here (Linux): http:// wiki.blender.org/index.php?title=Dev:Doc/Building_Blender/Linux/ Dependencies_From_Source#OpenVDB Reviewers: sergey, lukastoenne, brecht, campbellbarton Reviewed By: brecht, campbellbarton Subscribers: galenb, Blendify, robocyte, Lapineige, bliblubli, jtheninja, lukasstockner97, dingto, brecht Differential Revision: https://developer.blender.org/D1721
2016-01-23 08:39:29 +01:00
info_cfg_option(WITH_OPENVDB)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_text("Compiler Options:")
info_cfg_option(WITH_BUILDINFO)
info_cfg_option(WITH_OPENMP)
info_cfg_option(WITH_RAYOPTIMIZATION)
info_cfg_text("System Options:")
info_cfg_option(WITH_INSTALL_PORTABLE)
Mode switching for GHOST under X11: adds the ability to change screen resolutions in the blenderplayer on GNU/Linux. Code ported from Quake 2.
2012-01-02 13:25:14 +01:00
info_cfg_option(WITH_X11_XF86VMODE)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_option(WITH_X11_XINPUT)
cmake/mingw now builds with default configuration (needed to disable tiff/exr/cycles)
2012-04-12 07:34:17 +02:00
info_cfg_option(WITH_MEM_JEMALLOC)
avoid divide by zero with grid fill (when there is no selection)
2013-10-05 13:59:15 +02:00
info_cfg_option(WITH_MEM_VALGRIND)
add cmake option WITH_SYSTEM_OPENJPEG so linux can build cycles without having libopenjpeg installed.
2012-06-23 16:23:44 +02:00
info_cfg_option(WITH_SYSTEM_GLEW)
info_cfg_option(WITH_SYSTEM_OPENJPEG)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_text("Image Formats:")
Fix for commit r60718. There was a remaining WITH_IMAGE_OPENIMAGEIO in CMakeLists.txt still.
2013-10-13 11:35:54 +02:00
info_cfg_option(WITH_OPENIMAGEIO)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_option(WITH_IMAGE_CINEON)
info_cfg_option(WITH_IMAGE_DDS)
info_cfg_option(WITH_IMAGE_HDR)
info_cfg_option(WITH_IMAGE_OPENEXR)
info_cfg_option(WITH_IMAGE_OPENJPEG)
info_cfg_option(WITH_IMAGE_TIFF)
info_cfg_text("Audio:")
info_cfg_option(WITH_OPENAL)
info_cfg_option(WITH_SDL)
Support dynamic loading of SDL libraries This is mainly to address old issue when one need to have SDL library installed in order to use our official builds. Some hip distros already installs SDL, but it's not quite the same across all the variety of the distros. We also now switching to SDL-2.0, most of the distros have it in repositories already, so it shouldn't be huge deal to install it if needed. Reviewers: campbellbarton Reviewed By: campbellbarton Differential Revision: https://developer.blender.org/D878
2014-11-17 12:35:36 +01:00
info_cfg_option(WITH_SDL_DYNLOAD)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_option(WITH_JACK)
Fix #33518: Jack sync doesn't work in 2.64, 2.64 or 2.65 stable versions Added new build option WITH_JACK_DYNLOAD for CMake and WITH_BF_JACK_DYNLOAD for SCons, which means there'll be no build-time linking against libjack and getting symbols from libjack will happen runtime using dlopen and dlsym tricks. Alternative would be to use weak linking, but it'll require having wrapper for preloading libjack. This new options are disabled by default and they only intended to be used on linux. Other platforms shall not be using this and there shall be no functional changes on non-linux platforms at all.
2013-03-27 08:19:54 +01:00
info_cfg_option(WITH_JACK_DYNLOAD)
add option to build without blenders default avi codec.
2012-10-08 04:51:42 +02:00
info_cfg_option(WITH_CODEC_AVI)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_option(WITH_CODEC_FFMPEG)
info_cfg_option(WITH_CODEC_SNDFILE)
info_cfg_text("Compression:")
info_cfg_option(WITH_LZMA)
info_cfg_option(WITH_LZO)
info_cfg_text("Python:")
info_cfg_option(WITH_PYTHON_INSTALL)
WITH_PYTHON_INSTALL_NUMPY option for unix/cmake, just copies from site-packages.
2012-04-30 11:38:32 +02:00
info_cfg_option(WITH_PYTHON_INSTALL_NUMPY)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_option(WITH_PYTHON_MODULE)
info_cfg_option(WITH_PYTHON_SAFETY)
WITH_PYTHON_FRAMEWORK cmake option for OSX This option allow Blender to be linked against the Framework python It's useful if you want to have blenderplayer and bpy in the same application and need to avoid PyThread problems. patch reviewed by Jens Verwiebe before 2.66. He may want to change something though. (also small: I changed: /Library/Frameworks/Python.framework/Versions//python by /Library/Frameworks/Python.framework/Versions//Python as the latter seems to be the norm)
2013-02-22 23:24:38 +01:00
if(APPLE)
info_cfg_option(WITH_PYTHON_FRAMEWORK)
endif()
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_text("Modifiers:")
info_cfg_option(WITH_MOD_BOOLEAN)
option to build without remesh modifier for cmake and scons
2011-12-31 04:34:44 +01:00
info_cfg_option(WITH_MOD_REMESH)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_option(WITH_MOD_FLUID)
rename cmake WITH_OCEANSIM --> WITH_MOD_OCEANSIM and tag CYCLES_CUDA_BINARIES_ARCH as advanced.
2011-11-13 15:16:43 +01:00
info_cfg_option(WITH_MOD_OCEANSIM)
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
Ghost Context Refactor https://developer.blender.org/D643 Separates graphics context creation from window code in Ghost so that they can vary separately.
2014-10-07 22:46:19 +02:00
info_cfg_text("OpenGL:")
info_cfg_option(WITH_GLEW_ES)
info_cfg_option(WITH_GLU)
info_cfg_option(WITH_GL_EGL)
info_cfg_option(WITH_GL_PROFILE_COMPAT)
info_cfg_option(WITH_GL_PROFILE_CORE)
info_cfg_option(WITH_GL_PROFILE_ES20)
if(WIN32)
info_cfg_option(WITH_GL_ANGLE)
endif()
since cmake new auto-detects many features, print a summery of the configuration on first run.
2011-06-19 15:49:20 +02:00
info_cfg_text("")
message("${_config_msg}")
endif()
CMake: cleanup, namespace & unused vars also add macro 'print_all_vars()', if(0)'d - debugging only.
2014-11-16 12:57:42 +01:00
if(0)
print_all_vars()
endif()