Float2 are now a new type for attributes in Cycles. Before, the choices
for attribute storage were float and float3, the latter padded to
float4. This meant that UV maps were inflated to twice the size
necessary.
Reviewers: brecht, sergey
Reviewed By: brecht
Subscribers: #cycles
Tags: #cycles
Differential Revision: https://developer.blender.org/D4409
The Lamp data was not always set. When using CUDA or CPU it was, but when using OpenCL
without `OBJECT_MOTION` `sd->lamp` not updated to the actual lamp. This made the
TextureCoordinate output the wrong normal when used in a light shader.
As the normal was incorrect it made the IES node render incorrectly.
(what is the default for the IES node).
By setting the lamp data when no `__OBJECT_MOTION__` compile directive is present makes
sure that the normal is correctly calculated.
Fix D4450
Reviewed By: Brecht van Lommel
Displacement and Background kernels are selectively used, but always compiled. This patch will not compile these kernels when they are not needed.
Displacement kernel is only used for true displacement.
Background kernel is only used when there is a (Cycles)Light of type `LIGHT_BACKGROUND`.
Reviewed By: brecht, #cycles
Tags: #cycles
Maniphest Tasks: T61971
Differential Revision: https://developer.blender.org/D4412
The goal of this patch is to have limit the number of times
kernels needs to be compiled and are reused as kernels with
different compile directives can lead to identical same
binaries.
The implementation does this by stripping the compile directives.
and reshuffling kernels so the output is more likely to be the
same.
We focussed on the kernels where it was easy to detect and maintain
(bundle, bake, displace, do_volume and background). More optimizations
could be done but they are probably less obvious.
Merged the data_init and state_buffer_size kernels to split_bundle.
This patch will also remove empty kernels for do_volume and bake
when their features are not enabled.
When using the benchmark files there are less background, bake and
do_volume kernels compiled.
Fix: T61576, T61501, T61466
Reviewed By: brecht, #cycles
Differential Revision: https://developer.blender.org/D4390
When using preview rendering through a camera or final rendering
the `scene.render.use_motion_blur` was not respected when building
the compile directives.
This patch will when building the compile directives check if
motion blur is enabled at all. This should lead to more efficient
kernels when no motion blur is needed.
Tags: #cycles
Differential Revision: https://developer.blender.org/D4387
The bake kernels are also used during mesh displacement and light
importance sampling. We disabled the implementation of these kernels
when baking was not enabled.
Was happening when looking for all intersections for transparent shadow rays
in the case the ray is degenerate.
Still quesitonable whether we should consider this a transparent or opaque
configuraiton. Ideally, we should prevent such rays from happening, but that
is another vector of debugging.
Using OpenCL MegaKernel has been slow and therefore not usefull.
This patch will remove the mega kernel from the OpenCL codebase
and the OpenCLDeviceBase class.
T61736: removal of mega kernel
T61703: baking does not work with mega kernel
Tags: #cycles
Differential Revision: https://developer.blender.org/D4383
There is a generic function to retrieve float and float3 attributes
`primitive_attribute_float` and primitive_attribute_float3`. Inside
these functions an prioritised if-else construction checked where
the attribute is stored and then retrieved from that location.
Actually the calling function most of the time already knows where
the data is stored. So we could simplify this by splitting these
functions and remove the check logic.
This patch splits the `primitive_attribute_float?` functions into
`primitive_surface_attribute_float?` and `primitive_volume_attribute_float?`.
What leads to less branching and more optimum kernels.
The original function is still being used by OSL and `svm_node_attr`.
This will reduce the compilation time and render time for kernels.
Especially in production scenes there is a lot of benefit.
Impact in compilation times
job | scene_name | previous | new | percentage
-------+-----------------+----------+-------+------------
t61513 | empty | 10.63 | 10.66 | 0%
t61513 | bmw | 17.91 | 17.65 | 1%
t61513 | fishycat | 19.57 | 17.68 | 10%
t61513 | barbershop | 54.10 | 24.41 | 55%
t61513 | classroom | 17.55 | 16.29 | 7%
t61513 | koro | 18.92 | 18.05 | 5%
t61513 | pavillion | 17.43 | 16.52 | 5%
t61513 | splash279 | 16.48 | 14.91 | 10%
t61513 | volume_emission | 36.22 | 21.60 | 40%
Impact in render times
job | scene_name | previous | new | percentage
-------+-----------------+----------+--------+------------
61513 | empty | 21.06 | 20.35 | 3%
61513 | bmw | 198.44 | 190.05 | 4%
61513 | fishycat | 394.20 | 401.25 | -2%
61513 | barbershop | 1188.16 | 912.39 | 23%
61513 | classroom | 341.08 | 340.38 | 0%
61513 | koro | 472.43 | 471.80 | 0%
61513 | pavillion | 905.77 | 899.80 | 1%
61513 | splash279 | 55.26 | 54.86 | 1%
61513 | volume_emission | 62.59 | 61.70 | 1%
There is also a possitive impact when using CPU and CUDA, but they are small.
I didn't split the hair logic from the surface logic due to:
* Hair and surface use same attribute types. It was not clear if it could be
splitted when looking at the code only.
* Hair and surface are quick to compile and to read. So the benefit is quite
small.
Differential Revision: https://developer.blender.org/D4375
There is a generic function to retrieve float and float3 attributes
`primitive_attribute_float` and primitive_attribute_float3`. Inside
these functions an prioritised if-else construction checked where
the attribute is stored and then retrieved from that location.
Actually the calling function most of the time already knows where
the data is stored. So we could simplify this by splitting these
functions and remove the check logic.
This patch splits the `primitive_attribute_float?` functions into
`primitive_surface_attribute_float?` and `primitive_volume_attribute_float?`.
What leads to less branching and more optimum kernels.
The original function is still being used by OSL and `svm_node_attr`.
This will reduce the compilation time and render time for kernels.
Especially in production scenes there is a lot of benefit.
Impact in compilation times
job | scene_name | previous | new | percentage
-------+-----------------+----------+-------+------------
t61513 | empty | 10.63 | 10.66 | 0%
t61513 | bmw | 17.91 | 17.65 | 1%
t61513 | fishycat | 19.57 | 17.68 | 10%
t61513 | barbershop | 54.10 | 24.41 | 55%
t61513 | classroom | 17.55 | 16.29 | 7%
t61513 | koro | 18.92 | 18.05 | 5%
t61513 | pavillion | 17.43 | 16.52 | 5%
t61513 | splash279 | 16.48 | 14.91 | 10%
t61513 | volume_emission | 36.22 | 21.60 | 40%
Impact in render times
job | scene_name | previous | new | percentage
-------+-----------------+----------+--------+------------
61513 | empty | 21.06 | 20.35 | 3%
61513 | bmw | 198.44 | 190.05 | 4%
61513 | fishycat | 394.20 | 401.25 | -2%
61513 | barbershop | 1188.16 | 912.39 | 23%
61513 | classroom | 341.08 | 340.38 | 0%
61513 | koro | 472.43 | 471.80 | 0%
61513 | pavillion | 905.77 | 899.80 | 1%
61513 | splash279 | 55.26 | 54.86 | 1%
61513 | volume_emission | 62.59 | 61.70 | 1%
There is also a possitive impact when using CPU and CUDA, but they are small.
I didn't split the hair logic from the surface logic due to:
* Hair and surface use same attribute types. It was not clear if it could be
splitted when looking at the code only.
* Hair and surface are quick to compile and to read. So the benefit is quite
small.
Differential Revision: https://developer.blender.org/D4375
Previously, hair strands of zero length of too few control
points would have been ignored. This is fine for a render
without motion blur. But once motion blur is enabled it is
becoming more tricky to match topology.
Even more, it was causing access (and possibly writes) past
the array boundaries in case when time step 0 ignored some
strands and steps around it did not.
If this is becoming problematic for BVH to do reliable
intersections this is to be solved on the BVH builder side.
The export from Blender to Cycles shouldn't really make
decisions there.
All the controls were just really thrown in there without any proper
organization.
This gives it more structure.
- Correct use of sub-panels to communicate hierarchy and sections.
- Use flow layout for toggles.
- Use consistent names for "Bake Type".
The code assumed all datablocks were read from .blend files saved with the
same version. This restructures the Cycles versioning code to take into
account libraries.
This patch implements a workaround to get the multithreaded compilation from D2231 working.
So far, it only works for Blender, not for Cycles Standalone. Also, I have only tested the Linux codepath in the helper function.
Depends on D2231.
Patch by lukasstockner97, jbakker, brecht
job | scene_name | compilation_time
----------+-----------------+------------------
Baseline | empty | 22.73
D2264 | empty | 13.94
Baseline | bmw | 56.44
D2264 | bmw | 41.32
Baseline | fishycat | 59.50
D2264 | fishycat | 45.19
Baseline | barbershop | 212.28
D2264 | barbershop | 169.81
Baseline | victor | 67.51
D2264 | victor | 53.60
Baseline | classroom | 51.46
D2264 | classroom | 39.02
Baseline | koro | 62.48
D2264 | koro | 49.03
Baseline | pavillion | 54.37
D2264 | pavillion | 38.82
Baseline | splash279 | 47.43
D2264 | splash279 | 37.94
Baseline | volume_emission | 145.22
D2264 | volume_emission | 121.10
This patch reduced compilation time as the split kernels and base
kernels are compiled in parallel. In cycles debug mode (256) you can set
unmark the opencl single program file, what reduces the compilation time
even further (bmw 17 seconds, barbershop 53 seconds).
Reviewers: brecht, dingto, sergey, juicyfruit, lukasstockner97
Reviewed By: brecht
Subscribers: Loner, jbakker, candreacchio, 3dLuver, LazyDodo, bliblubli
Differential Revision: https://developer.blender.org/D2264
This patch implements a workaround to get the multithreaded compilation from D2231 working.
So far, it only works for Blender, not for Cycles Standalone. Also, I have only tested the Linux codepath in the helper function.
Depends on D2231.
Reviewers: brecht, dingto, sergey, juicyfruit, lukasstockner97
Reviewed By: brecht
Subscribers: Loner, jbakker, candreacchio, 3dLuver, LazyDodo, bliblubli
Differential Revision: https://developer.blender.org/D2264
Values outside the 0..1 range produce negative colors, so now clamp to that
range everywhere. Also fixes improper handling of hue > 2.0 in some places.
For OIIO 2.x we must use unique_ptr. This also required updating the
guarded allocator for std::move to work. Since C++11 construct/destroy
have a default implementation that also works this case, so we just
leave it out.
The render layer name is now always included. Best to keep these consistent,
so that animation denoising and sample merging works the same for both and
tests can be the same. Ref D4311.
This adds a cycles.denoise_animation operator, which denoises an animation
sequence or individual file. Renders must be saved as multilayer EXR files
with denoising data passes.
By default file path and frame range come from the current scene, and EXR
files are denoised in-place. Alternatively, a different input and/or output
file path can be provided.
Denoising settings come from the current view layer. Renders can be denoised
again with different settings, as the original noisy image is preserved along
with other passes and metadata.
There is no user interface yet for this feature, that comes later.
Code by Lukas with modifications by Brecht. This feature was originally
developed for Tangent Animation, thanks for the support!
Differential Revision: https://developer.blender.org/D3889
This adds a cycles.denoise_animation operator, which denoises an animation
sequence or individual file. Renders must be saved as multilayer EXR files
with denoising data passes.
By default file path and frame range come from the current scene, and EXR
files are denoised in-place. Alternatively, a different input and/or output
file path can be provided.
Denoising settings come from the current view layer. Renders can be denoised
again with different settings, as the original noisy image is preserved along
with other passes and metadata.
There is no user interface yet for this feature, that comes later.
Code by Lukas with modifications by Brecht. This feature was originally
developed for Tangent Animation, thanks for the support!
This is backporting a change from 2.8, which may help solve crashes when
activating a window. Previously bringTabletContextToFront() would call
tablet API functions with NULL tablet, which may crash on some drivers.
Ref T60811.
This is a request by the studio here to make it possible to see how
many samples were used to render a specific shot or a frame. It is a
bit more tricky than simply stamping number of samples from a scene
since rendering is happening in multiple ranges of samples.
This change makes it so Cycles saves configured number of samples for
the specific view layer, and also stores start sample and number of
samples when rendering only a subrange of all samples.
The format used is "cycles.<view_layer_name>.><field>", which allows
to have information about all layers in a multi-layer EXR file.
Ideally we can store simplified "cycles.<field>" if we know that there
is only one render layer in the file, but detecting this is somewhat
tricky since Cycles operates on an evaluated scene which always have
single view layer.
The metadata is shown in the Metadata panels for clip, image and
sequencer spaces.
Example screenshot which shows the metadata:
{F6527727}
Reviewers: brecht
Reviewed By: brecht
Subscribers: fsiddi
Differential Revision: https://developer.blender.org/D4311
This is the internal implementation, not available from the API or
interface yet. The algorithm takes into account past and future frames,
both to get more coherent animation and reduce noise.
Ref D3889.
Prefiltering of feature passes will happen during rendering, which can
then be used for denoising immediately or written as a render pass for
later (animation) denoising.
The number of denoising data passes written is reduced because of this,
leaving out the feature variance passes. The passes are now Normal,
Albedo, Depth, Shadowing, Variance and Intensity.
Ref D3889.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
When using `--cycles-resumable-num-chunks N` to render a subset of the
samples, having N close to the total number of samples causes rounding
issues.
For example, a file configured for 250 samples and 150 chunks should
have 1.6666 sample per chunk. The old code rounded this to 2 samples per
chunk, which would result in too many samples being rendered. When
rendering a single chunk this doesn't matter much, but when larger chunk
ranges are rendered with `--cycles-resumable-start-chunk` and
`--cycles-resumable-end-chunk` the rounding errors start to add up.
By multiplying with the number of chunks to render first, and only round
to integers after that, this issue is solved. In the above example,
rendering 3 chunks will correctly render 5 samples rather than 6.
When the requested number of chunks is larger than the number of samples
there will be duplicate samples (that is, sample N appearing both in
chunk M and M+1). In this case a warning is printed to stderr.
This is needed for T50977 Progressive render: use non-uniform sample
chunks.
Reviewed by: sergey
Differential Revision: https://developer.blender.org/D4282
We've had many reported crashes on Windows where we suspect there is a
corrupted OpenCL driver. The purpose here is to keep Blender generally
usable in such cases.
Now it always shows None / CUDA / OpenCL in the preferences, and only when
selecting one will it reveal if there are any GPUs available. This should
avoid crashes when opening the preferences or on startup.
Differential Revision: https://developer.blender.org/D4265
This is a quick workaround to prevent the crashes with multi-view.
The ultimate solution can be plenty, and would turn around refactoring
Cycles to handle multi-view internally, so that depsgraph could be freed
before render with no problems.
Reviewers: brecht, sergey
For the complete discussion check: https://developer.blender.org/D4239
The integrator maximum number of closures was not set properly for the CPU/mega
kernels to match the actual available memory. Before relatively recent code
refactoring we did not use this value in those kernels so it worked fine.
this can now be found in the sidebar View panel
- uses existing 'lock_camera_and_layers' but renames the property to
'use_local_camera'
- uses RNA_def_property_boolean_negative_sdna to flip the value
- remove the local view code in
rna_SpaceView3D_lock_camera_and_layers_set
- update Python code
- update Addons code will be separate commit
Fixes T60756
Reviewers: billreynish, brecht
Maniphest Tasks: T60756
Differential Revision: https://developer.blender.org/D4247
Even though it makes sense logically to have displacement actually displace
the mesh, this is causing a lot of confusion for existing users that are used
to the previous behavior. Further, since Eevee does not support displacement
yet and the discrepancy between the viewport and final render is problematic.
This fixes following errors:
- The code didn't work correctly for edges reconstructed by
the OpenSubdiv's topology refiner (due to indexing
difference).
- Sharpness of non-manifold and boundary edges was not
working correctly.
Xorg's XIWarpPointer doesn't support multi-head display while
XWarpPointer does.
Revert since this is a known TODO in Xorg and setting a custom
xinput matrix seems not to be used often.
Resolves T50383
Xorg's XIWarpPointer doesn't support multi-head display while
XWarpPointer does.
Revert since this is a known TODO in Xorg and setting a custom
xinput matrix seems not to be used often.
Resolves T50383
Brecht Van Lommel
Stefan Werner
Jeroen Bakker
Sergey Sharybin
Ray Molenkamp
Campbell Barton
William Reynish
Bastien Montagne
Lukas Stockner
Pablo Vazquez
Sybren A. Stüvel
Robert Guetzkow
Dalai Felinto
Philipp Oeser