I added a new BLO_userdef_default.h header to contain declarations of
two global variables that are still defined in C files. Use of designated
initializers for large structs make those files harder to change.
Arguably this is a better header for them anyway.
Pull Request: https://projects.blender.org/blender/blender/pulls/118015
Splits the flag `..._FLAG_INSERTNEEDED` between autokey and
manual keying. The fact that this flag was shared between the two
systems has been the cause of issues in the past. It wouldn't
let you insert a keyframe even though you explicitly used an operator
to do so.
In order to be clearer what options are used where, the user preferences
have been reordered.
By default "Only Insert Needed" will be enabled for auto-keying, but not for manual keying.
The versioning code will enable both if it was enabled previously.
# Code side changes
The keying system has flags that define the behavior
when keys are inserted. Some of those flags were shared
between keying and auto-keying. Some were only used for
auto-keying.
To clarify that, prefix flags that used exclusively in one or the other
system with `AUTOKEY`/`MANUALKEY`
Also the flag name on the user preferences and the tool settings was renamed.
Previously it was called `autokey_flag`. To indicated that it is not only used
for autokeying, rename it `keying_flag`.
Fixes: #73773
Pull Request: https://projects.blender.org/blender/blender/pulls/115525
This was missed during #113504
While the versioning code set the flags correctly,
the defaults were not specified correctly.
This would leave new users to key only location.
Fix it by enabling Location, Rotation, Scale and
Custom Properties by default.
Pull Request: https://projects.blender.org/blender/blender/pulls/116180
When animators want to key something in the viewport,
the code needs to know *which properties* should be keyed of that selected thing.
So far that was done with keying sets, and a pop-up that let's
you choose the keying set to use. You can get rid of the popup by
choosing a keying set ahead of time. But that is also not always desirable.
That pop-up is quite confusing and gives way too many options.
To simplify this process this PR adds a User Preference option to choose one or more of:
* Location
* Rotation
* Scale
* Rotation Mode
* Custom Properties
Now whenever the `I` key is pressed in the viewport,
and no keying set is enabled, it reads the preferences for which channels to insert.
# User Facing changes
* The popup will not be shown when pressing the hotkey,
but you can still explicitly use keying sets by going to the menu
* Which channels are keyed is defined by a User Preference setting under animation
* when a keying set is used explicitly, the User Preference settings are ignored
Part of #113278
Pull Request: https://projects.blender.org/blender/blender/pulls/113504
Changes to edit mode mesh overlays, use hue shift instead of color
fading/darkening for selection mode visual differentiation, and some
theme changes to improve the display of mesh edges and faces with good
selection visibility.
- Removed "edge" toggle from edit mode overlays panel.
- No longer halves the edge and face alpha depending on selection mode.
Half the face alpha in wire-frame mode. For better visibility on most
themes.
Ref !111431
Currently retiming is quite awkward, when you need to retime multiple
strips strips in sync. It is possible to use meta strips, but this is
still not great. This is resolved by implementing selection.
General changes:
Gizmos are removed, since they are designed to operate only on active
strip and don't support selection.
Transform operator code is implemented for retiming data, which allows
more sophisticated manipulation.
Instead of drawing marker-like symbols, keyframes are drawn to
represent retiming data. Retiming handles are now called keys. To have
consistent names, DNA structures have been renamed.
Retiming data is drawn on strip as overlay.
UI changes:
Retiming tool is removed. To edit retiming data, press Ctrl + R, select
a key and move it. When retiming is edited, retiming menu and
context menu shows more relevant features, like making transitions.
Strip and retiming key selection can not be combined. It is possible to
use box select operator to select keys, if any key is selected.
Otherwise strips are selected.
Adding retiming keys is possible with I shortcut or from menu.
Retiming keys are always drawn at strip left and right boundary. These
keys do not really exist until they are selected. This is to simplify
retiming of strips that are resized. These keys are called "fake keys"
in code.
API changes:
Functions, properties and types related to retiming handles are renamed
to retiming keys:
retiming_handle_add() -> retiming_key_add()
retiming_handle_move() -> retiming_key_move()
retiming_handle_remove() -> retiming_key_remove()
retiming_handles -> retiming_keys
RetimingHandle -> RetimingKey
Retiming editing "mode" is activated by setting `Sequence.show_retiming_keys`.
Pull Request: https://projects.blender.org/blender/blender/pulls/109044
Fixed by using a slightly transparent white color that blends
correctly with the background of text inputs and list items.
Also use the same colors in the Text Editor for consistency in both
Dark and Light themes.
Instead of four discrete thumbnail sizes, allow the user to instantly
zoom to any integer size from 16-256. This also changes the default to
96 from the current 128.
Pull Request: https://projects.blender.org/blender/blender/pulls/105815
As concluded in discussion under #109439, the View Item widgets are
supposed to use List Item widget theme colors. This patch does that.
Co-authored-by: Harley Acheson <harley.acheson@gmail.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/111584
Move Auto-Offset toggle from Node Editor View menu
into the Editing > Node Editor section of User Preferences,
to reflect its use as a workflow option not configured
per editor or per file.
Pull Request: https://projects.blender.org/blender/blender/pulls/111589
This was hard coded to 8, which can still result in a number that
jitters making the overall FPS difficult to measure.
The default is still 8, but this is now a preference that can be
increased for values that don't jitter as much.
The default vignette effect introduces issues reported several times
on various hardware configurations.
It would still be nice to figure out the issue and fix it in the
vignette effect code. For now, simply use single-color in the
default theme.
As agreed during the 2023-08-15 User Interface Module meeting.
Fixes#93627Closes#106699
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
First implementation of node previews in the shader node editor. Using
the same user interface as compositor node previews, most shader nodes
can now be previewed (except group in/output and material output).
This is currently still an experimental feature, as polishing of the
user experience and performance improvements are planned. These will
be easier to do as incremental changes on this implementation.
See #110353 for details on the work that remains to be done and known
limitations.
Implementation notes:
We take advantage of the `RenderResult` available as `ImBuf` images to
store a `Render` for every viewed nested node tree present in a
`SpaceNode`. The computation is initiated at the moment of drawing nodes
overlays.
One render is started for the current nodetree, having a `ViewLayer`
associated with each previewed node. We separate the previewed nodes in
two categories: the shader ones and the non-shader ones.
- For non-shader nodes, we use AOVs which highly speed up the rendering
process by rendering every non-shader nodes at the same time. They are
rendered in the first `ViewLayer`.
- For shader nodes, we render them each in a different `ViewLayer`, by
rerouting the node to the output of the material in the preview scene.
The preview scene takes the same aspect as the Material preview scene,
and the same preview object is used.
At the moment of drawing the node overlay, we take the `Render` of the
viewed node tree and extract the `ImBuf` of the wanted viewlayer/pass
for each previewed node.
Pull Request: https://projects.blender.org/blender/blender/pulls/110065
This patch includes set of smaller changes to address visual
inconsistencies and bugs:
- Strip previews are drawn under title bar
- All strip previews now disappear when there isn't enough space for
drawing
- Like the sound strip, the color strip expands to fill the whole strip
when there is little vertical space, "taking over" the strip title
Color is more important visual indicator than the name of the strip
- Disabling strip title no longer disables strip handle frame previews
- All strip previews are now be affected by the "Show overlays" toggle
- Turning off strip text overlay no longer makes the color strip
preview disappear
The previous commit introduced all the basic bits and pieces necessary
to support asset shelves as experimental feature, but didn't actually
add support for any specific editor. With this commit asset shelves can
be registered in 3D Views, which should soon be used by the Pose Library
add-on to replace its previous UI in the sidebar (see
blender/blender-addons#104546). Note that until then, there will still be no
actual asset shelf to display.
Also adds:
- Toggle to hide/unhide the asset shelf under "View" -> "Asset Shelf"
- 3D View theme settings for the asset shelf regions.
None of the changes are visible if the experimental option for the asset
shelf is not enabled.
Approved as part of #104831, then split off as separate commit.
Pull Request: #110767
This adds support for running a set of nodes repeatedly. The number
of iterations can be controlled dynamically as an input of the repeat
zone. The repeat zone can be added in via the search or from the
Add > Utilities menu.
The main use case is to replace long repetitive node chains with a more
flexible alternative. Technically, repeat zones can also be used for
many other use cases. However, due to their serial nature, performance
is very sub-optimal when they are used to solve problems that could
be processed in parallel. Better solutions for such use cases will
be worked on separately.
Repeat zones are similar to simulation zones. The major difference is
that they have no concept of time and are always evaluated entirely in
the current frame, while in simulations only a single iteration is
evaluated per frame.
Stopping the repetition early using a dynamic condition is not yet
supported. "Break" functionality can be implemented manually using
Switch nodes in the loop for now. It's likely that this functionality
will be built into the repeat zone in the future.
For now, things are kept more simple.
Remaining Todos after this first version:
* Improve socket inspection and viewer node support. Currently, only
the first iteration is taken into account for socket inspection
and the viewer.
* Make loop evaluation more lazy. Currently, the evaluation is eager,
meaning that it evaluates some nodes even though their output may not
be required.
Pull Request: https://projects.blender.org/blender/blender/pulls/109164
- Ensure a trailing slash in BKE_blendfile_userdef_from_defaults
instead of in-line platform specific checks.
- Take a buffer size argument for the directory.
- Use the documented size for SHGetSpecialFolderPathW wchar_t argument.
- Remove use of unsafe `wcscat` on WIN32
Add a user preference to set up a custom text editor for editing text
files with the "Edit Source" action in the UI context menu.
- An operator TEXT_OT_jump_to_file_at_point has been added.
- A custom editor can be set in the user preferences.
- A preset has been included for "Visual Studio Code".
- When the editor is not set, use Blender's internal editor.
Ref !108299.
The new theme setting for the dope sheet (timeline) allows changing the
color of the bar that shows which frames are cached/baked. The
invalid/cached/baked status is differentiated by hardcoded transparency
values. In theory, those could be separate theme settings though.
Pull Request: https://projects.blender.org/blender/blender/pulls/107738
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
Makes it possible to select multiple custom script directories in Preferences >
File Paths, replacing the single Scripts path option. Each of these directories
supports the regular script directory layout with a startup file (or files?),
add-ons, modules and presets.
When installing an add-on, the script directory can be chosen.
NOTE: Deprecates the `bpy.types.PreferencesFilePaths.script_directory`
property, and replaces `bpy.utils.script_path_pref` with
`bpy.utils.script_paths_pref`.
Pull Request: https://projects.blender.org/blender/blender/pulls/104876
Increase the default value for the maximum number of recently-opened
files from 10 to 20. Also change the user's preference on version bump
to this new value if their current value is exactly the old default.
Pull Request: https://projects.blender.org/blender/blender/pulls/105703
Move two settings that were previously in the "View" menu of the Graph Editor into User Preferences.
It has been mentioned in the meeting by Luciano Muñoz Sessarego that it would be good to move that to the preferences so you can set it once and then forget about it.
The Settings moved are:
Only Selected Curve Keyframes
Use High Quality Display
Pull Request: https://projects.blender.org/blender/blender/pulls/104532
Add overlay option for retopology, which hides the shaded mesh akin to Hidden Wire, and offsets the edit mesh overlay towards the view.
Related Task #70267
Pull Request #104599
Previously [D16255](https://developer.blender.org/D16255)
There is no option to adjust the edge_width like there is in the preferences for vertex_size and face_dot_size.
I only added the option for 3DView and UV/Image Editor, and limited both to a max size of 5 pixel, since the edges do not look very nice with too high values.
In the UV Editor only, there are always black outlines on the edges, I could not find a way to reduce the increasing thickness of these black outlines.
The default edge_width of 1 pixel:
Here the edge_width with a falue of 3:
And here the visible increase of the dark border of the edges and their overlap (even at the maxed size of 5):
Lastly for the 3DView the max edge_width of 5 looks like this:
Pull Request #104741
This commit implements described in the #104573.
The goal is to fix the confusion of the submodule hashes change, which are not
ideal for any of the supported git-module configuration (they are either always
visible causing confusion, or silently staged and committed, also causing
confusion).
This commit replaces submodules with a checkout of addons and addons_contrib,
covered by the .gitignore, and locale and developer tools are moved to the
main repository.
This also changes the paths:
- /release/scripts are moved to the /scripts
- /source/tools are moved to the /tools
- /release/datafiles/locale is moved to /locale
This is done to avoid conflicts when using bisect, and also allow buildbot to
automatically "recover" wgen building older or newer branches/patches.
Running `make update` will initialize the local checkout to the changed
repository configuration.
Another aspect of the change is that the make update will support Github style
of remote organization (origin remote pointing to thy fork, upstream remote
pointing to the upstream blender/blender.git).
Pull Request #104755
Currently Metal is more stable then the OpenGL backend on apple
devices. Also the Metal backend supports more features then the
OpenGL backend. For example the viewport compositor and rendering
of production files.
This has been validated with users and studios.
This patch will default to the Metal backend when starting
Blender 3.5 for the first time or when loading factory startup. It
is still possible to switch to OpenGL via the user preferences.
It will not automatically select the Metal backend when there is
already user preferences available for Blender 3.5.
Currently the passepartout color is hardcoded to black. While a
sensible default for cinema, it may make less sense for other media,
whether video, print, web, etc. It greatly affects viewing conditions
of the image and should be user selectable, much like painting
programs allow.
Pull Request #104486
(MacOS) only: In the System tab of the user preferences the user has the
ability to select a GPU backend that Blender will use. After changing
the GPU backend setting, the user has to restart Blender before the
setting is used.
It was added to start collecting feedback on the Metal backend without
using the command lines.
By default Blender will select OpenGL as backend. When Metal is selected
(via `--gpu-backend metal` or via user preferences) OpenGL will be used as
fallback when the platform isn't capable of running Metal.
openSubdiv_init() would detect available evaluators before any OpenGL context
exists, causing a crash with libepoxy. This test however is redundant as we
already check the requirements on the Blender side through the GPU API.
To simplify things, completely remove the device detection in the opensubdiv
module and reduce the evaluators to just CPU and GPU. The plan here is to move
to the GPU module abstraction over OpenGL/Metal/Vulkan and so all these
different backends no longer make sense.
This also removes the user preference for OpenSubdiv compute device, which was
not used for the new GPU subdivision implementation.
Ref D15291
Differential Revision: https://developer.blender.org/D15470
Part of T98560.
See https://wiki.blender.org/wiki/Source/Interface/Views
Adds all the basic functionality needed for grid views. They display
items in a grid of rows and columns, typically with a preview image and
a label underneath. Think of the main region in the Asset Browser.
Current features:
- Active item
- Notifier listening (also added this to the tree view)
- Performance: Skip adding buttons that are not scrolled into view
(solves performance problems for big asset libraries, for example).
- Custom item size
- Preview items (items that draw a preview with a label underneath)
- Margins between items scale so the entire region width is filled with
column, rather than leaving a big empty block at the right if there's
not enough space for another column (like the File and current Asset
Browser does it).
- "Data-View Item" theme colors. Not shown in the UI yet.
No user visible changes expected since the grid views aren't used for
anything yet.
This was developed as part of a rewrite of the Asset Browser UI
(`asset-browser-grid-view` branch), see T95653. There's no reason to
keep this part in a branch, continuing development in master makes
things easier.
Grid and tree views have a lot of very similar code, so I'm planning to
unify them to a degree. I kept things separate for the start to first
find out how much and what exactly makes sense to override.
Those geometry types are expected to behave the same as e.g. mesh
with respect to data copying. The fact that this was not enabled
already was an oversight in the initial commit that added these types.
Differential Revision: https://developer.blender.org/D14554
This patch adds channel region to VSE timeline area for drawing channel
headers. It is synchronizedwith timeline region. 3 basic features are
implemented - channel visibility, locking and name.
Channel data is stored in `SeqTimelineChannel` which can be top-level
owned by `Editing`, or it is owned by meta strip to support nesting.
Strip properties are completely independent and channel properties are
applied on top of particular strip property, thus overriding it.
Implementation is separate from channel regions in other editors. This
is mainly because style and topology is quite different in VSE. But
also code seems to be much more readable this way.
Currently channels use functions similar to VSE timeline to draw
background to provide illusion of transparency, but only for background
and sfra/efra regions.
Great portion of this patch is change from using strip visibility and
lock status to include channel state - this is facilitated by functions
`SEQ_transform_is_locked` and `SEQ_render_is_muted`
Originally this included changes in D14263, but patch was split for
easier review.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D13836
This commit makes the dot grid used as background in the node editor
more visually stable when zooming in and out.
The dot grid now uses a continuously subdividing pattern, where
each level of subdivision divides the previous five times, similar to
the line grid in the 3D viewport.
The maximum for the "Grid Levels" theme setting is changed to 3, since
any further subdivisions are too small to be visible.
The "Grid Levels" value for the default themes "Blender Dark" and
"Blender Light" is therefore changed to 3, as well.
Reviewed By: Hans Goudey, Pablo Vazquez
Differential Revision: http://developer.blender.org/D13302
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
Hans Goudey
Pratik Borhade
Kamil Galik
Brecht Van Lommel
Christoph Lendenfeld
Gilberto Rodrigues
Pablo Vazquez
Richard Antalik
Harley Acheson
Rawalanche
Campbell Barton
Colin Marmond
ok_what
Julian Eisel
Jacques Lucke
guishe
Julian Eisel
Harley Acheson
bonj
Patrick Busch
Sergey Sharybin
Jeroen Bakker
Damien Picard
Jeroen Bakker
Leon Schittek
Kévin Dietrich